Sentiotec Pro D2 Bedienungsanleitung

Version 12/20 Ident-Nr. 1-041-284

INSTRUCTIONS FOR INSTALLATION AND USE

English

Sauna control unit

Pro D

Pro D2 1-041-288/PRO-D2

Pro D2 white 1-041-290/PRO-D2W

Pro D2i 1-041-291/PRO-D2I

Pro D2i white 1-041-292/PRO-D2IW

Pro D3 1-041-293/PRO-D3

D3 white 1-041-294/PRO-D3W

Pro D3i 1-041-295/PRO-D3I

D3i white 1-041-296/PRO-D2IW

Table of Contents

1. About this instruction manual 6

2. Important information for your safety 7

2.1. Intended use 7

2.2. Safety information for the installer 8

2.3. Safety information for the user 9

3. Product description 10

3.1. Specicationssupplied 10

3.2. Optional accessories 10

3.3. Product functions 11

3.4. Sauna operating modes 15

3.5. Sensor operating modes 15

4. Installation 18

4.1. Installing the power supply unit 18

4.2. Installing the control panel 20

4.3. Installing the heater sensor F1 with overheat cut-out 23

4.4. Installing bench sensor F2 (optional) 24

4.5. Installing humidity sensor FTS2

(optional, only Pro D3/Pro D3i) 24

4.6. Installing foil sensor FTS2 (optional, only Pro D2i/Pro D3i) 25

5. Electrical connection 26

5.1. Connecting the power supply cable, heater and evaporator 27

5.2. Connecting the control panel 28

5.3. Connecting the light 29

5.4. Connecting the fan (optional) 29

5.5. Connecting additional output (optional, only Pro D2i/Pro D3i) 29

5.6. Connecting the power booster (optional) 30

5.7. Connecting heater sensor F1 30

5.8. Installing bench sensor F2 (optional) 30

5.9. Connecting humidity sensor FTS2

(optional, only Pro D3/Pro D3i) 30

5.10. Connecting foil sensor (optional, only Pro D2i/Pro D3i) 31

5.11. Connecting the safety cut-out 31

5.12. Remote start 31

5.13. Status output 32

5.14. Finishing the installation 32

6. Performing tests 32

7. Terminal diagram 34

8. Commissioning 35

8.1. Setting the function selector switch 35

8.2. Settings on the technician menu 38

9. Controls 45

9.1. Control panel Pro D2 45

9.2. Control panel Pro D2i 45

9.3. Control panel Pro D3 46

9.4. Control panel Pro D3i 46

9.5. Additional output control panel Pro D (optional) 47

9.6. Power unit 47

10. Operation 48

10.1. Switching on the light on the power supply unit (cleaning lights) 48

10.2. Switching on the power unit 48

10.3. Activating the control panel 49

10.4. Additional output control panel Pro D (optional) 49

10.5. Starting sauna mode 50

10.6. Switchingo󰀨saunamode 50

10.7. Starting combi mode (only Pro D3/Pro D3i) 51

10.8. Switchingo󰀨combimode(onlyProD3/ProD3i) 51

10.9. Starting additional output (only Pro D2i/Pro D3i) 52

10.10.Switchingo󰀨additionaloutput(optional,onlyProD2i/ProD3i) 54

10.11. Switching on the light 55

10.12.Switchingo󰀨thelight 55

10.13. Starting the fan 56

10.14.Switchingo󰀨thefan 56

10.15. Setting the preset time 57

10.16. Cancelling the preset time function 58

10.17. Setting the duration 58

10.18. Activating standby for remote operation 59

10.19. Changing the settings 59

10.20. Cancelling the post-drying program (only Pro D3/ProD3i) 60

10.21.Switchingo󰀨functions 60

10.22. Deactivating the control panel 60

10.23.Switchingo󰀨thepowersupplyunit 60

11. User programs 61

11.1. Preset user programs 61

11.2. Accessing user programs 62

11.3. Creating your own user programs 62

12. The Eco-function 64

13. Cleaning and maintenance 65

13.1. Cleaning 65

13.2. Maintenance 65

14. Disposal 65

15. Troubleshooting 66

15.1. Error messages 66

15.2. Low-water display (only Pro D3/Pro D3i) 67

15.3. Fuses 67

16. Technical data 68

16.1. Power unit 68

16.2. Control panel Pro D2/Pro D2i/Pro D3/Pro D3i 70

16.3. Additional output control panel Pro D (optional) 70

Instructions for installation and use p. 6/70

1.About this instruction manual

Read these installation and operating instructions carefully and keep them within

reach of the sauna control unit. This ensures that you can refer to information

about your safety and the operation at any time.

Symbols used for warning notices

In these instructions for installation and use, a warning notice located next to

an activity indicates that this activity poses a risk. Always observe the warning

notices. This prevents damage to property and injuries, which in the worst case

may be fatal.

The warning notices contain keywords, which have the following meanings:

DANGER!

Serious or fatal injury will occur if this warning notice is not observed.

WARNING!

Serious or fatal injury can occur if this warning notice is not observed.

CAUTION!

Minor injuries can occur if this warning notice is not observed.

ATTENTION!

This keyword is a warning that damage to property can occur.

Other symbols

This symbol indicates tips and useful information.

These installation and operating instructions can also be found in the

downloads section of our website: www.sentiotec.com/downloads.

Instructions for installation and use p. 7/70

2.Important information for your safety

The sauna control units of the Pro D series have been produced

in accordance with the applicable safety rules and regulations.

However, hazards may occur during use. Therefore adhere to the

followingsafetyinformationandthespecicwarningnoticesin

the individual chapters. Also observe the safety information for the

devices connected.

2.1. Intended use

The sauna control units of the Pro D series are used exclusively for

operating and controlling the sauna functions in accordance with

the technical data.

The sauna control units of the Pro D series may only be used for

operatingandcontrollingasaunaheaterwhichhasbeencertied

as satisfying the combustion test described in paragraph 19.101 of

EN 60335-2-53. If the heater does not meet this requirement, an

appropriate safety precaution must be taken (for example: safety

shut-o󰀨,see5.11onpage31).

The sauna control units of the Pro D series may only be used for

operating and controlling 3 heating circuits with a maximum heating

capacity of 3.5 kW per heating circuit. The maximum evaporator ca-

pacity is 3.5 kW. The maximum additional output capacity is 3.5 kW.

Any use exceeding this scope is considered improper use. Improper

use can result in damage to the product, severe injuries or death.

Instructions for installation and use p. 8/70

2.2. Safety information for the installer

●Installationmayonlybeperformedbyaqualiedelectricianor

similarlyqualiedperson.

●Work on the sauna control unit may only be performed when the

power has been disconnected.

●A fully disconnecting all-pole isolating device compliant with

overvoltagecategoryIIImustbettedon-site.

●The sauna control unit must be installed outside the sauna room

at a height of approx. 1.70 m or in accordance with the rec-

ommendation issued by the sauna manufacturer. The ambient

temperature must be within a range spanning -10 °C to +40 °C.

●The heater sensor must be attached in a way that it is not af-

fectedbyaowofair.

●The heater supply cable must have a minimum cross-sectional

area of 2.5 mm2and be temperature resistant up to 150 °C.

●Any local regulations applicable at the installation location should

also be observed.

●For your own safety, consult your supplier in the event of prob-

lemsthatarenotexplainedinsu󰀩cientdetailintheinstallation

instructions.

Instructions for installation and use p. 9/70

2.3. Safety information for the user

●The sauna control unit must not be used by children under

8 years old.

●The sauna control unit may be used by children above 8 years

old, by persons with limited psychological, sensory or mental

capabilities or by persons with lack of experience/knowledge

only when:

– They are supervised.

– They have been shown how to use the device safely and

are aware of the hazards that could occur.

●Children must not play with the sauna control unit.

●Children under 14 years of age may only clean the sauna control

unit if they are supervised.

● Forhealthreasons,donotusethesaunawhenundertheinu-

ence of alcohol, medication or drugs.

●Make sure that no combustible objects have been placed on the

sauna heater before the sauna control unit is switched on.

●Make sure that no combustible objects have been placed on the

heater before activating the preset time function or the stand-by

mode for the remote start.

●Make sure that no combustible objects have been placed on

or in front of the infra-red lamp before the sauna control unit is

switched on.

●Make sure that no combustible objects have been placed on

the infra-red lamp before activating the preset time function or

the stand-by mode for the remote start.

●For your own safety, consult your supplier in the event of prob-

lemsthatarenotdescribedinsu󰀩cientdetailintheoperating

instructions.

Instructions for installation and use p. 10/70

3.Product description

3.1. Specications supplied

●Operating unit (depending on version Pro D2/D2i/D3/D3i)

●Power unit

●Heater sensor with integrated overheat cut-out

●Sensor wires

●Installation material

●Wire jumper for bridging terminals V1 and Wm for combi heaters without

low-watershut-o󰀨

3.2. Optional accessories

●Bench sensor (1-009-231/O-F2), sensor cables 1.5 m

●Humidity temperature sensor (1-010-081/O-FTS2), sensor cables 3 m

●Foil sensor (1-014-445/P-ISX-FF), sensor cables 3 m

●Power booster (1-008-779/O-S2-18, 1-009-280/O-S2-30)

● Safetyshut-o󰀨(SFE-xxxxx)

●Operating unit Pro D2 (1-040-159/PRO-D2-CU)

●Operating unit Pro D2 white (1-040-161/PRO-D2W-CU)

●Operating unit Pro D2i (1-040-163/PRO-D2I-CU)

●Operating unit Pro D2i white (1-040-165/PRO-D2IW-CU)

●Operating unit Pro D3 (1-040-167/PRO-D3-CU)

●Operating unit Pro D3 white (1-040-169/PRO-D3W-CU)

●Operating unit Pro D3i (1-1040-173/PRO-D3I-CU)

●Operating unit Pro D3i white (1-1-040-173/PRO-D3IW-CU)

●Additional output control panel Pro D (1-040-174/PRO-DA-CU)

●Additional output control panel Pro D white (1-040-175/PRO-DAW-CU)

●Pro D BUS converter RS485 (1-045-317 / PRO-D-CON)

●ProNet web server (1-017-521 / PRO-NET)

●Remote start system (1-051-003 / FS-SY)

●Door sensor system (1-052-722 / SAB00102)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sentiotec Steuereinheit Handbücher

Sentiotec

Sentiotec Just Sauna Fin Series Bedienungsanleitung

Sentiotec

Sentiotec Pro D Bedienungsanleitung

Sentiotec

Sentiotec CV 31 Bedienungsanleitung

Sentiotec

Sentiotec Pro B2 Bedienungsanleitung

Sentiotec

Sentiotec IS1 Bedienungsanleitung

Sentiotec

Sentiotec CK 31 Bedienungsanleitung

Sentiotec

Sentiotec Pro-C2 Bedienungsanleitung

Sentiotec

Sentiotec time4wellness K2 NEXT Bedienungsanleitung

Sentiotec

Sentiotec A2 Bedienungsanleitung

Sentiotec

Sentiotec Pro C3 Bedienungsanleitung

Sentiotec

Sentiotec Pro C3 Bedienungsanleitung

Sentiotec

Sentiotec IS2 Bedienungsanleitung

Sentiotec

Sentiotec CK 41 Bedienungsanleitung

Sentiotec

Sentiotec K Series Bedienungsanleitung

Sentiotec

Sentiotec A2 Bedienungsanleitung

Sentiotec

Sentiotec IS1 P-IS1-T Bedienungsanleitung

Sentiotec

Sentiotec A2 Bedienungsanleitung

Sentiotec

Sentiotec IHS 1 Stücklistenhandbuch

Sentiotec

Sentiotec Pro B2 Bedienungsanleitung

Sentiotec

Sentiotec Pro B2 Bedienungsanleitung

Sentiotec

Sentiotec Pro C2 Bedienungsanleitung

Sentiotec

Sentiotec wave.com4 touch Bedienungsanleitung

Sentiotec

Sentiotec just sauna combi Bedienungsanleitung

Sentiotec

Sentiotec K1 Next Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung