Serpent 903780 Bedienungsanleitung
REAR HEAVE DAMPER ASSEMBLY # 903780
1
STEP 1
1.1 2.1
2.2
1.2
Use some silicone oil
during the assembly.
Use some silicone oil
during the assembly.
For the correct piston
holes please check the
default setupsheet.
Insert the o-ring
inside the spring
collar.
Note the correct
orientation of the
shock spacers .
Note the correct
position of the
o-ring .
1
2
STEP 2
2
STEP 3
3.3 3.43.1
SHOCKS LENGTH:
Measure the shock length
fully extended.
14.5
mm
Push the shock top
and the membrane
into the shock cap. 1- Fill up with sillicone oil
fully using the silicone
oil supplied in the kit.
For the correct cst value
please check the default
setupsheet.
2- Extend the shockrod fully
3- Move the shockrod
slowly up and down
to let ALL air bubbles
escape.
4- Close top only 3/4.
1-Bleed: push the
shockrod all the way
in slowly, to allow
excessive oil to escape.
2- Close the shock cap
completely.
3.2
Assemble the spring and spring-
cup (align correctly) to complete
the shock.
3
STEP 5 STEP 6
Remove rear shocks
and brackets
Remove these
2 screws
4
STEP 7 STEP 8
M3x8
M3x6 M3x6
M3x6
M3x6
M3x8
M3x8
M3x8 M3x6
1
1
2
2
M3x6
Andere Serpent Spielzeug Handbücher
Serpent
Serpent Cobra GT RTR Bedienungsanleitung
Serpent
Serpent S100 Bedienungsanleitung
Serpent
Serpent s411ff Bedienungsanleitung
Serpent
Serpent S811 Cobra Truggy Bedienungsanleitung
Serpent
Serpent S120 LTR Bedienungsanleitung
Serpent
Serpent S811-B Cobra RTR Bedienungsanleitung
Serpent
Serpent SRX2 GEN3 CARPET Bedienungsanleitung
Serpent
Serpent S811-BE COBRA RTR Bedienungsanleitung
Serpent
Serpent 710 Bedienungsanleitung
Serpent
Serpent Seven20 Bedienungsanleitung
