SEWOO SLK-TL100 Bedienungsanleitung
Aroot Co., Ltd.
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea
TEL : +82-31-8077-5000 / FAX : +82-31-624-5310
http://www.miniprinter.com
TL100 ENG Rev D 01/2021
All speci cations are subject to change without notice
MODEL : SLK-TL100
Receipt Printer User’s Manual
2
This device co mplies with part 15 of the FCC Rules.
Operation is subject to the following two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
Vic Barczyk
19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA
sales@miniprinter.com
Henning Mahlstedt
26188 Edewecht, Holljestr.9 | Germany
europe@miniprinter.com
Victor Almazan
Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
sales@miniprinter.com
Yan xiao rui
Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,
Songjiang District, Shanghai | China
sales@miniprinter.com
3
Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronics equipment. For more detailed information about recycling of this product, please contact your
local city oce, your household waste disposal service or the shop where you purchased the product.
4
Table of Contents
1. Parts Identications 5
2. Setting up the printer 6
2.1 Unpacking 6
2.2 Connecting the cables 7
2.3 Loading the Roll Paper 10
3. Control panel and other functions 13
3.1 Control panel 13
3.2 Error Indicators 13
4. Self Test 14
5. ASCII Print 15
6. Select Baudrate Mode 15
7. Hexadecimal Dump 16
8. Printer cleaning 17
9. Specications 18
9.1. General Specications 18
9.2. Auto Cutter Specications 20
9.3. Interface 20
9.4. Electrical Characteristics 20
9.5. Environmental Requirements 21
9.6. Reliability 21
9.7. Certication 21
10. Command List 22
11. Utilities 24
12. S/W 25
5
1. Parts Identications
Features LED indicators
to indicate printer status
and switches to operate
the printer.
CONTROL LABEL
Open this cover to load
or replace paper.
TOP COVER
Used to turn on/o
power to the printer
POWER SWITCH
INTERFACE
CONNECTOR(SERIAL)
INTERFACE
CONNECTOR(USB)
PERIPHERAL DRIVE
CONNECTOR
POWER CONNECTOR
6
2. Setting Up the Printer
2-1. Unpacking
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
The Printer CD Roll Paper
Adaptor(Optional) Interface Cable(optional)
7
2-2. Connecting the Cables
You can connect up the cables required for printing to the printer.
They all connect to the connector panel on the back of the printer, which is shown below :
INTERFACE
CONNECTOR(SERIAL)
PERIPHERAL DRIVE
CONNECTOR
POWER CONNECTOR
For connection to a host
computer.
For connection to a host
computer.
For connection of the AC
adapter. Never unplug
the AC adapter while the
printer is on.
Connects to peripheral units
such as cash drawers, etc.
Do not connect this to a
telephone.
INTERFACE
CONNECTOR(USB)
Before connecting any of the cables, make sure that both the printer and the com-
puter are turned o.
8
2-2-1. Interface Connector
9 Pin Serial
Serial Interface
PIN SIGNAL I/O DESCRIPTION
2RxD Input Printer transmit data line RS-232C level
3TxD Output Printer receive data line RS-232C level
4, 7 DTR Output Printer handshake to host line RS-232C level
5GND -System Ground
6DSR Input Data Send Ready
1, 8, 9 NC - -
4 3
21
USB “B” TYPE
USB Interface
PIN SIGNAL I/O Description
1+5V -+5V
2DATA- -Printer transmit data line
3DATA+ -Printer transmit data line
4GND -System Ground
9
2-2-2. Cash Drawer Connector
The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.
The driver is capable of supplying a maximum current of 0.1A for 510ms or less
when not printing.
61
PIN SIGNAL Description
1Signal GND -
2Drawer kick-out drive signal 1 Output
3Drawer open/close signal Input
4+24V -
5Drawer kick-out drive signal 2 Output
6Signal GND -
Andere Handbücher für SLK-TL100
1
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere SEWOO Drucker Handbücher
SEWOO
SEWOO LK-P400 Bedienungsanleitung
SEWOO
SEWOO LK-P30B Bedienungsanleitung
SEWOO
SEWOO LK-P300 Bedienungsanleitung
SEWOO
SEWOO LK-D10 Bedienungsanleitung
SEWOO
SEWOO SLK-TE21 Series Bedienungsanleitung
SEWOO
SEWOO SLK-TS400 Bedienungsanleitung
SEWOO
SEWOO SLK-T42 Bedienungsanleitung
SEWOO
SEWOO LK-P43 Bedienungsanleitung
SEWOO
SEWOO SLK-TE25 Bedienungsanleitung
SEWOO
SEWOO LK-P31 Bedienungsanleitung
SEWOO
SEWOO SLK-TL21 Series Bedienungsanleitung
SEWOO
SEWOO SLK-TS400 Bedienungsanleitung
SEWOO
SEWOO SLK-TL122 Bedienungsanleitung
SEWOO
SEWOO LK-P400 Bedienungsanleitung
SEWOO
SEWOO LK-T210 Bedienungsanleitung
SEWOO
SEWOO LK-B10 Bedienungsanleitung
SEWOO
SEWOO LK-P30 II Bedienungsanleitung
SEWOO
SEWOO LK-P22 Bedienungsanleitung
SEWOO
SEWOO LK-T12 Bedienungsanleitung
SEWOO
SEWOO WTP-150 Bedienungsanleitung
