Shark Raw Bedienungsanleitung

SHARK Nano - SHARK Raw - V01 - 06122012

SHARK Raw •SHARK Nano

Thank you for choosing a SHARK Nano/ SHARK Raw helmet. The SHARK Nano / SHARK Raw

is a top-quality helmet that is ideal for use for urban and extra urban area.

The helmet complies with international standards but does not purport to guarantee total protec-

tion in all circumstances.

Make sure you carefully read all of the following recommendations before using the helmet. Just

because you are wearing a helmet does not mean you should neglect driving carefully.

Standard: This SHARK Nano/ SHARK Raw helmet has been approved and conforms to the ECE R

22/05 standard. It therefore meets the requirements imposed on all the countries that recognise

this standard in their territory.

Warning : for French trafﬁc, the Highway Code requires safety reﬂectors (supplied

separately in a packet) to be ﬁtted in accordance with the enclosed plan. In the United

States and Canada, speciﬁc regulations require that helmets that only have ECE approval

cannot be used in these territories unless they have acquired additional DOT FMVSS 218

approval.

You can ﬁnd this user manual on our web site

www.shark-helmets.com

Anatomy of the helmet ...........................................................................................................................................4

A helmet in your size ..............................................................................................................................................5

Advice for use: put and remove.......................................................................................................................6

CHIN STRAP : micrometric buckle ........................................................................................................ 6 - 7

SHARK Nano only: VISOR , system QRVS, maintenance.................................................... 8 - 9

SHARK Nano only: SUN VISOR, dismounting and maintenance............................10 - 11

SHARK Raw only: GOGGLES, system QRVS, maintenance.........................................12 - 13

TEXTILE PARTS : Type, treatment, dismounting and maintenance ......................14-16

Easy Fit ..............................................................................................................................................................................17

SHARKTOOTH.................................................................................................................................................................17

Ventilation and function cork..........................................................................................................................18

Warranty ...........................................................................................................................................................................19

Legal information

SOMMAIRE

XS 53/54

S55/56

M57/58

L59/60

XL 61

SHARK Nano

1) Visor VZ140 long trip (SHARK Nano only)

1b) Goggles (SHARK Raw only)

2) Sun Visor (SHARK Nano only)

3) Command sun visor ergonomic

4) Top ventilation

5) Cork top ventilation

6) QVRS ( (quick release visor system)

7) Chip strap

8) Visor seal

9) Mask (SHARK Raw only)

ANATOMY OF THE HELMET

SHARK Raw

A HELMETS IN YOUR SIZE

For a helmet to provide effective protection while

remaining comfortable, it has to be perfectly

suited to its user.

Choosing the correct size is essential.

• Measure the circumference of your head with

a tape measure, positioning it about 2 cm above

your eyebrows: this is where your head is the

largest. Once you have taken this measurement,

compare it to the table of sizes. Try the size of

SHARK Nano and SHARK Raw helmet closest

to the measurement obtained, starting with

the size smaller than your head measurement.

If you feel that the contact is too hard, try the

size larger.

Your head should be held quite ﬁrmly but you

should feel no discomfort.

• Tests for size must be carried out with the

chin strap tightened (please refer to the section

on page 6-7 for instructions on tightening the

chin strap). Check that you have good vertical

and horizontal visibility.

Check that your head can carry out all of these

movements without any particular discomfort.

• Check that when the chin strap is tightened,

the helmet cannot be removed from your head

when you try to move it forward by force. If the

helmet comes off or nearly comes off, it is too

big or else the chin strap is not correctly tighte-

ned. Keep trying on helmets until you ﬁnd the

ideal size.

WARNING: do not lend your helmet, even for

a short journey, if its size is not perfectly

suitable. For each use of your helmet, it is

absolutely necessary to make sure that the

helmet is well positioned on your head, and

that the chin strap is properly adjusted, fol-

lowing the instructions of this manual (see

page 6-7).

A HELMETS IN YOUR SIZE

ADVISE FOR USE

1/ Putting on the helmet

Once the chin strap is released, you have to

take hold of the two sections by the buckles and

hold them slightly apart to facilitate the passage

of your head. While carrying out this movement,

you are advised to keep the two sections of the

chin strap apart with your thumbs so that they

are properly positioned. Position the protective

parts of the chin strap buckle correctly and fas-

ten it in accordance with the recommendations

that are appropriate to the versions and country

(see page 6-7).

Check that the tension and therefore the posi-

tioning of the helmet are correct for all posi-

tions.

2/ Removing the helmet

Release the chin strap; hold the two sections

slightly apart as for putting the helmet on and

remove the helmet.

CHIN STRAP MICROMETRIC BUCKLE

CHIN STRAP Micrometric buckle

Holding system

Depending on the various versions and the

country concerned, your SHARK Nano / SHARK

Raw helmet is equipped with a chin strap with

a “Precise Lock” rapid buckle with a snap lock.

The “Precise Lock” snap lock system gives you

precise and accurate adjustment because of

the considerable length of its notched section.

However, it is essential on purchase to adapt

the length of the chin strap to your measure-

ments.

Adjust the length of the strap using the adjus-

ting buckle (Figs. A, B, C and D).

CHIN STRAP MICROMETRIC BUCKLE

Choose your SHARK Nano or SHARK Raw and

attach the holding system. When the “Precise

Lock” is adjusted to the medium position, the chin

strap must be correctly tensioned under the chin

to hold the helmet ﬁrmly without causing you any

discomfort or pain.

To fasten the chin strap, all you have to do is to

thread the tongue into its place on the buckle until

tension is perfect (Fig. B).

The tongue connects and is automatically blocked.

To release the chin strap, you have to pull on the

lever and remove the tongue from the buckle.

Although the notched tongue enables you to

change the adjustment precisely on each use, it is

important to check frequently that the adjustment

of the strap length is correct.

Warning: never ride with the chin strap loose or

insufﬁciently tightened. Even though the inte-

rior padding gives you the impression of being

held, your helmet risks coming off in a fall.

Never apply lubricating or acid products or

grease or solvents to the chin strap buckle

parts.

VISOR •MAINTENANCE

VZ140 «long trip» visor of your SHARK Nano

helmet is injected into a polycarbonate material

speciﬁcally developed for its excellent optical

quality and high performance shock resistance.

With a thickness of 2.2mm, it offers a good

strength.

It was developed from a complete aerodynamic

simulation and is speciﬁcally recommended for

long journeys at high speed: the long trip makes

it possible to have a good ﬁeld of vision at slow

speed such as faster.

VZ140 screen is optical class 2.

It has three technical areas that allow a greater

demisting surface and a better visibility:

- One come with air diffusers for a larger demis-

ting area

- Two shaped air outlets to force the extraction

of hot and humid air, by «Venturi effect».

- Bafﬂes channeling air ﬂow away from the

plates, thus reducing the noise associated with

the aeroacoustics.

With its curved proﬁle, this screen provides

protection against wash air even at high speed.

The outer surface of the screen has a treatment

with high resistance to scratches.

SHARK Nano ONLY

1/ Opening of the visor

To open the visor, just unlock by pulling it away

slightly to the left (taken grip at the bottom left

of the screen). The pin which maintained is

released. Just then up the screen on the top

of the cap.

2/ Closure of the visor

To close, the screen can be manipulated by

gripping the outlet positioned on the top cen-

ter of the screen. Scroll down until you hear

it click: it is therefore locked by the pin at the

bottom left.

3/ Maintenance

For protection and improve its life, the outer

surface of your visor SHARK Nano is anti-

scratch treated. When cleaning the screen, use

lukewarm water (below 40 degrees) and a soft

cloth (100% cotton and lint) to wipe the screen.

Neutral soap as “savon de Marseille” can help

you clean up.

Caution: Never use any kind washing win-

dows (with alcohol or other solvent type),

these products can damage the screen

treatment.

QRVS SYSTEM

QRVS System

SHARK Nano ONLY

This screen has a system of easy disassembly

without tools, allowing you to clean it easily.

1. Claim screen in the upper position (Fig 1)

2. Exerting tension on the side of the screen

(Fig 2)

3. Then repeat on the other side (Fig 3)

Dismantling

assembly

1. Place the screen face to the helmet (Fig 4)

2. Screen the hooks in the side ﬂanges (Fig 5)

3. Squeeze homogeneous on both sides (Fig 5)

SUN VISOR

SHARK Nano is equipped with a sun visor with

an integrated external control.

This ergonomic command allows to operate the

visor from the outside with ease and whatever

the type of gloves worn, offering you a fast and

full protection security. The R & D department

has developed a mechanism for obtaining a

progressive movement of the control. The sun

visor has a 380 UV protection to ﬁlter out 100%

of UVA and UVB.

Warning: This sun visor cannot be used

when the light is strong and you ride in an

area where you may have a sudden change

in visibility (ex tunnel). In all cases where

visibility is reduced, the beginning or end of

the day, night, rain or fog, the sun visor must

be set high to not to degrade your vision.

The visor is operated by the elastomer button

located on the left side of the helmet.

The visor is operated by the lever located on

the left side plate.

The visor is lowered when the grip is located

upwards and is noted when the latter is down.

SUN VISOR

SHARK Nano ONLY

Maintenance

For protection and improve its life, the outer

surface of your sun visor SHARK Nano is anti-

scratch treated. When cleaning the screen, use

lukewarm water (below 40 degrees) and a soft

cloth (100% cotton and lint) to wipe the screen.

Neutral soap as “savon de Marseille” can help

you clean up.

Caution: Never use any kind washing win-

dows (with alcohol or other solvent type),

these products can damage the screen

treatment.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shark Motorradzubehör Handbücher

Shark

Shark Evo-One Bedienungsanleitung

Shark

Shark S 700 Bedienungsanleitung

Shark

Shark RIDILL Bedienungsanleitung

Shark

Shark SKWAL 2 Bedienungsanleitung

Shark

Shark Evoline 3 Series Bedienungsanleitung

Shark

Shark Spartan GT Carbon Bedienungsanleitung

Shark

Shark Micro Bedienungsanleitung

Shark

Shark DRAK Bedienungsanleitung

Shark

Shark RSR2 Bedienungsanleitung

Shark

Shark Vantime Bedienungsanleitung

Shark

Shark SX 2 Bedienungsanleitung

Shark

Shark ATV-DRAK Bedienungsanleitung

Shark

Shark Evo-One Bedienungsanleitung

Shark

Shark SPARTAN GT PRO Bedienungsanleitung

Shark

Shark Racer-R Bedienungsanleitung

Shark

Shark S 700 Bedienungsanleitung

Shark

Shark SPARTAN RS Bedienungsanleitung

Shark

Shark SKWAL 2 Bedienungsanleitung

Shark

Shark Vision-R Bedienungsanleitung

Shark

Shark Race-R PRO Bedienungsanleitung

Shark

Shark CITYCRUISER Bedienungsanleitung

Shark

Shark Explore-R Bedienungsanleitung

Shark

Shark S 600 Bedienungsanleitung

Shark

Shark RSJ Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung