Sharp MX-B400P Installations- und Betriebsanleitung

INSTALLATION

REQUIREMENTS

SUPPLIES

TO THE ADMINISTRATOR

OF THE MACHINE

SPECIFICATIONS

LASER PRINTER

Please read first

Please read this guide first to ensure safe

use of the machine.

Before installing this product, be sure to

read the "TO ENSURE SAFE USE OF THE

MACHINE" and "INSTALLATION

REQUIREMENTS" sections.

Keep this manual close at hand

for reference whenever needed.

MX-B400PMODEL:

Safety GuideSafety GuideSafety Guide

CAUTIONS

MX-B400P Safety Guide

D IN CHINA

A KS1

E4635FCZZ

mxb400p_us_saf.book Page -1 Monday, November 9, 2009 11:05 AM

Notice for Users in U.S.A.

EMC (this machine and peripheral devices)

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Each instruction also covers the optional units used with these products.

Caution!

For complete electrical disconnection, pull out the main plug.

The socket-outlet should be installed near the equipment and should be easily

accessible.

FOR YOUR RECORDS ...

To protect against loss or theft, record and retain for reference the machine's serial

number located at the lower left corner of the left side of the machine.

Model Number

Serial Number

Date of Purchase

Place of Purchase

Authorized Sharp Dealer

Service Department Number

WARNING:

FCC Regulations state that any unauthorized changes or modifications to this

equipment not expressly approved by the manufacturer could void the user's authority

to operate this equipment.

Shielded interface cables must be used with this equipment to maintain compliance

with EMC regulations.

This machine contains software modules developed by Independent JPEG Group.

This product includes Adobe

Flash

technology of Adobe Systems Incorporated.

mxb400p_us_saf.book Page 0 Monday, November 9, 2009 11:05 AM

Contents

CAUTIONS . . . . . . . . . . . . . . . . . 3

Laser information . . . . . . . . . . . . 8

INSTALLATION REQUIREMENTS . . .

SUPPLIES. . . . . . . . . . . . . . . . . 11

Storage of supplies. . . . . . . . . . 11

Supply of spare parts and

consumables . . . . . . . . . . . . . . 11

SPECIFICATIONS . . . . . . . . . . 12

Machine specifications . . . . . . . 12

Continuous printing speeds . . . 16

Ambient environment . . . . . . . . 16

Acoustic noise emission

(measurement according to

ISO7779) . . . . . . . . . . . . . . . . . 17

Chemical emission (measured

according to RALUZ122: Edition

Jun. 2006) . . . . . . . . . . . . . . . . 17

500-sheet paper feed unit

specifications . . . . . . . . . . . . . . 18

Finisher specifications . . . . . . . 19

TO THE ADMINISTRATOR OF

THE MACHINE . . . . . . . . . . . . . 22

Factory default passwords . . . . 22

Trademark acknowledgments . . .

mxb400p_us_saf.book Page 1 Monday, November 9, 2009 11:05 AM

Warranty

While every effort has been made to make this document as accurate and helpful as

possible, SHARP Corporation makes no warranty of any kind with regard to its content.

All information included herein is subject to change without notice. SHARP is not

responsible for any loss or damages, direct or indirect, arising from or related to the use

of this operation manual.

translation without prior written permission is prohibited, except as allowed under

Note:

• Considerable care has been taken in preparing this manual. If you have any

comments or concerns about the manual, please contact your dealer or nearest

SHARP Service Department.

• This product has undergone strict quality control and inspection procedures. In the

unlikely event that a defect or other problem is discovered, please contact your

dealer or nearest SHARP Service Department.

• Aside from instances provided for by law, SHARP is not responsible for failures

occurring during the use of the product or its options, or failures due to incorrect

operation of the product and its options, or other failures, or for any damage that

occurs due to use of the product.

Products that have earned the ENERGY STAR®are designed to

protect the environment through superior energy efficiency.

The Environmental Choice Program guidelines are applied to the

products only in Canada. The products that meet the

Environmental Choice Program guidelines carry the logo shown

to the left. The products without the logo may not meet the

Environmental Choice Program guidelines.

mxb400p_us_saf.book Page 2 Monday, November 9, 2009 11:05 AM

CAUTIONS

Symbols in this manual

To ensure safe use of the machine, this manual uses various safety symbols. The

safety symbols are classified as explained below. Be sure you understand the meaning

of the symbols when reading the manual.

WARNING Indicates a risk of death or serious injury.

CAUTION Indicates a risk of human injury or property damage.

Meaning of the symbols

The symbol indicates the need for caution. The specific matter that requires

caution is indicated inside the symbol (the symbol at left indicates "caution: high

temperature").

The symbol indicates an action that is prohibited. The specific action that is

prohibited is indicated inside or beside the symbol (the symbol at left indicates

"disassembly is prohibited").

The symbol indicates an action that is mandatory.

WARNING

Do not remove the machine casing.

High-voltage parts inside the machine may cause electrical shock.

Be sure to connect the power cord only to a power outlet that

meets the specified voltage and current requirements. Also

make certain the outlet is properly grounded. Do not use an

extension cord or adapter to connect other devices to the power

outlet used by the machine. Using an improper power supply

may cause fire or electrical shock.

*For the power supply requirements, see the name plate in the lower left

corner of the left side of the machine.

Do not damage or modify the power cord.

Placing heavy objects on the power cord, pulling it, or forcibly

bending it will damage the cord, resulting in fire or electrical shock.

Do not place a container of water or other liquid, or a metal

object that might fall inside, on the machine.

If the liquid spills or the object falls into the machine, fire or

electrical shock may result.

mxb400p_us_saf.book Page 3 Monday, November 9, 2009 11:05 AM

CAUTIONS

WARNING

Do not insert or remove the power plug with wet hands.

This may cause electrical shock.

Do not use a flammable spray to clean the machine.

If gas from the spray comes in contact with hot electrical components

or the fusing unit inside the machine, fire or electrical shock may result.

Do not make any modifications to this machine.

Doing so may result in personal injury or damage to the machine.

If a thunder storm begins, switch off the main power and remove

the power plug from the outlet to prevent electrical shock and

fire due to lightning.

If you notice smoke, a strange odor, or other abnormality, do

not use the machine.

If used in this condition, fire or electrical shock may result.

Immediately switch off the main power and remove the power plug

from the power outlet. Contact your dealer or nearest SHARP Service Department.

If a piece of metal or water enters the machine, switch off the

main power and remove the power plug from the power outlet.

Contact your dealer or nearest SHARP Service Department. Using

the machine in this condition may result in electrical shock or fire.

mxb400p_us_saf.book Page 4 Monday, November 9, 2009 11:05 AM

CAUTIONS

CAUTION

Do not throw toner, a toner container (toner cartridge), or a

waste toner box into a fire.

Toner may fly and cause burns.

Do not install in a location with moisture or dust.

Risk of fire and electrical shock.

Do not install the machine on an unstable or slanted surface. Install the

machine on a surface that can withstand the weight of the machine.

There is a risk of injury due to the machine falling or toppling. If peripheral

devices are to be installed, do not install on an uneven floor, slanted surface,

or otherwise unstable surface. There is a danger of slippage, falling, and toppling. Install

the product on a flat, stable surface that can withstand the weight of the product. (Weight

when various peripheral devices are installed: approx. 116.9 lbs. (53 kg))

Do not touch the transfer belt or the transfer roller.

Scratches or smudges on the transfer belt or the transfer roller will

cause dirty prints.

When removing the power plug from the outlet, do not pull on the cord.

Pulling on the cord may cause damage such as wire exposure and

breakage, and may result in fire or electrical shock.

Do not block the ventilation ports on the machine. Do not install

the machine in a location that will block the ventilation ports.

Blocking the ventilation ports will cause heat to build up in the

machine, creating a risk of fire.

If you find that condensation has formed on the surface of the

machine or the display, open the right cover and check for

condensation inside the machine. If condensation has formed

inside the machine, turn off the main power. Turning on the main

power when condensation has formed inside the machine may cause a failure.

Leave the right cover open until the condensation evaporates naturally.

To keep foreign matter from getting on the primary transfer belt unit or secondary

transfer roller unit while the right cover is open, place a cover over the opening.

Store toner, toner containers (toner cartridges), and

waste toner boxes out of the reach of children.

mxb400p_us_saf.book Page 5 Monday, November 9, 2009 11:05 AM

CAUTIONS

CAUTION

When moving the machine, switch off the main power and

remove the power plug from the outlet before moving.

The cord may be damaged, creating a risk of fire or electrical shock.

If you will not use the machine for a long time, be sure to

remove the power plug from the outlet for safety.

The fusing unit is hot. When removing a

misfeed, do not touch the fusing unit.

Take care not to burn yourself.

When loading paper, removing a misfeed,

performing maintenance, closing the front

and side covers, and inserting and removing

trays, take care that your fingers are not

pinched.

The machine is heavy. To prevent injury when moving the

machine, it is recommended that it be moved by two or more

persons.

Fusing unit

mxb400p_us_saf.book Page 6 Monday, November 9, 2009 11:05 AM

CAUTIONS

The machine includes the print hold function, which stores document image data on the

machine's hard drive. Stored documents can be called up and printed as needed. If a

hard drive failure occurs, it will no longer be possible to call up the stored document

data. To prevent the loss of important documents in the unlikely event of a hard drive

failure, store the original data elsewhere.

With the exception of instances provided for by law, Sharp Corporation bears no

responsibility for any damages or loss due to the loss of stored document data.

"BATTERY DISPOSAL"

THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY

THAT MUST BE DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL

SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR

ASSISTANCE IN DISPOSING OF THIS BATTERY.

This product utilizes a CR coin Lithium battery which contains a Perchlorate material.

Special handling for this material may apply, California residents, See

www.dtsc.ca.gov/hazardouswaste/perchlorate/

Others, consult local environmental officers.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of

mercury. Disposal of these materials may be regulated due to environmental

consideration. For disposal or recycling information, please contact your local

authorities, the Electronics Industries Alliance: www.eiae.org, the lamp recycling

organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP.

(For U.S.A. Only)

Non LPS

Do not connect to devices other than

specified peripheral devices of our company.

For North America

mxb400p_us_saf.book Page 7 Monday, November 9, 2009 11:05 AM

CAUTIONS

Laser information

Wave length 790 nm ± 10 nm

Pulse times

(North America and Europe)

4.1 µs ± 4.1 ns / 7 mm

Output power Max 0.6 mW (LD1+ LD2)

Caution

Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)

For North America:

SAFETY PRECAUTIONS

This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and

1040.11 of the CDRH standards. This means that the equipment does not produce

hazardous laser radiation. For your safety, observe the precautions below.

• Do not remove the cabinet, operation panel or any other covers.

• The equipment's exterior covers contain several safety interlock switches. Do not

bypass any safety interlock by inserting wedges or other items into switch slots.

For Europe:

CLASS 1 LASER PRODUCT

LASER KLASSE 1

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

mxb400p_us_saf.book Page 8 Monday, November 9, 2009 11:05 AM

Andere Handbücher für MX-B400P

Inhaltsverzeichnis

Andere Sharp Drucker Handbücher

Sharp

Sharp Network Scanner Bedienungsanleitung

Sharp

Sharp AM-300 Bedienungsanleitung

Sharp

Sharp MX-B427PW Bedienungsanleitung

Sharp

Sharp SD-2060 Bedienungsanleitung

Sharp

Sharp AR-M350U Bedienungsanleitung

Sharp

Sharp AJ-1805 Einrichtungshandbuch

Sharp

Sharp AR-M351N Bedienungsanleitung

Sharp

Sharp MZ-80P6 Bedienungsanleitung

Sharp

Sharp MX-M260 Einrichtungshandbuch

Sharp

Sharp AR-M355N Bedienungsanleitung

Sharp

Sharp AR-M351N Bedienungsanleitung

Sharp

Sharp MX-M310 Einrichtungshandbuch

Sharp

Sharp MX-6500N Bedienungsanleitung

Sharp

Sharp BP-70M90 Bedienungsanleitung

Sharp

Sharp BP-70M75 Leitfaden

Sharp

Sharp PR-45M Bedienungsanleitung

Sharp

Sharp AR-P13 Bedienungsanleitung

Sharp

Sharp AJ-2000 Einrichtungshandbuch

Sharp

Sharp DX-B350P Bedienungsanleitung

Sharp

Sharp JX-720 Bedienungsanleitung

Sharp

Sharp AR-N275 Bedienungsanleitung

Sharp

Sharp MX-FNX2 Bedienungsanleitung

Sharp

Sharp SF-2014 Bedienungsanleitung

Sharp

Sharp AL-1000 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung