Sharper Image SI561 Bedienungsanleitung
“Bright As Day!”®
Power-Port Desk Lamp
SI561 Instructions
Read and save these instructions.
SI561 IM_v2 1106.indd 1 12/7/06 4:08:15 PM
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
Our goal is that you will be completely satisfied with this product’s
quality and performance. We offer generous return privileges and
excellent warranties on all our products.
Since 1977, The Sharper Image has shared the fun of discovering
innovative products that make life better and more enjoyable. We’ve
been in business a long time because we are an exciting place to shop
and — just as importantly — we strive to deliver outstanding customer
service that exceeds your expectations.
Enjoy your purchase!
Call 1-800-344-4444 for ordering and customer service, or visit
, our award-winning Website.
SI561 IM_v2 1106.indd 2 12/7/06 4:08:16 PM
When using electrical appliances, basic safety precautions
should always be followed.
READ ALL INSTRUCTIONS BEFORE USING.
Lighted lamp is HOT.
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, EXPOSURE TO EXCESSIVE UV, RADIATION OR
INJURY TO PERSONS:
1. Before replacing the bulb, turn off/unplug and allow the lamp
to cool.
2. Lamp becomes HOT quickly! Only touch the switch/plug
when turning on the lamp.
3. Do not touch hot lamp-containment barrier.
4. Do not remain in direct light from the lamp if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that may burn.
7. Use only with a 27-watt lamp/bulb.
IMPORTANT SAFETY
INSTRUCTIONS
SI561 IM_v2 1106.indd 3 12/7/06 4:08:16 PM
8. Do not operate the lamp with a missing or damaged guard or
lamp-containment barrier.
9. When connecting an AC appliance to the built-in AC outlets
on the base, refer to the power rating of the connected appli-
ance and do not exceed 5A total power load on one or both
outlets combined.
10.Warning: To maintain a good balance and to prevent the lamp
from tipping over, keep the lowest section of the adjustable
arms at or above a 72-degree angle from horizontal.
SAVE THESE INSTRUCTIONS
Power Outlet Instructions
To reduce the risk of electric shock, this lamp has a grounding
type plug that has a third (grounding) pin. This plug will only fit
into a grounding type power outlet. If the plug does not fit into
the outlet, contact a qualified electrician to install the proper
outlet. Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug in any way.
IMPORTANT SAFETY
INSTRUCTIONS
SI561 IM_v2 1106.indd 4 12/7/06 4:08:16 PM
Precautions
RISK OF FIRE: Failure to read and follow these precautions could
result in risk of fire.
1. Do not use with power supply voltage other than 120V AC.
2. Do not use outdoors or in locations with high humidity, such
as bathrooms.
3. Do not install above sources of high heat, such as a stove or
heater.
4. Do not touch the lamp while it is lit or immediately after
turning off the lamp.
Maintenance
Caution: If any malfunction occurs, do not try to repair the unit
yourself. Return it to an authorized facility or to the manufacturer.
The appliance has no user-serviceable parts.
SI561 IM_v2 1106.indd 5 12/7/06 4:08:16 PM
General Instructions
Parts Diagram
Lamp Cover
Lamp/Bulb
(FML27)
Power Control
Knob
Base
Adjustment
Knobs
Arms
USB Port
Grounded
Power Outlets
SI561 IM_v2 1106.indd 6 12/7/06 4:08:17 PM
1. Remove the plastic packing materials from the light fixture.
2. Remove the foam shipping guard from behind the pre-
installed lamp.
Note: The lamp socket (containment barrier) pivots out.
Be certain to push the lamp and socket back into the fixture.
(See Figure A below.)
3. To adjust the lamp height and angle, loosen the knobs on the
fixture arms and move the arms to the desired height and
angle, then tighten the knobs to secure the new positions.
Figure A
Assembly
SI561 IM_v2 1106.indd 7 12/7/06 4:08:17 PM
1. Plug the lamp into a 110-120V three-prong power outlet.
2. Turn the POWER CONTROL KNOB to turn the light on or off.
The built-in AC power outlets can be used to connect up to two
separate chargers or other AC appliances. Do not exceed 5A total
power load on one or both outlets combined.
The built-in USB power port can be used to connect, power and
charge compatible USB products.
Note: Not all products that have a USB cable can be charged by
a USB port. Consult your USB product manual if it isn’t obtaining
correct power.
Operation
Power Control
Knob
USB Port
Grounded
Power Outlets
SI561 IM_v2 1106.indd 8 12/7/06 4:08:17 PM
1. The lamp and socket pivot out for easy replacement. Gently
pull the lamp out and slide the lamp out of the fixture socket.
(See Figure B below.)
2. Replace with a new lamp. Replacement lamps are available
from The Sharper Image (Item No. SI928). Do not use any
other lamp with this product.
3. Gently push the lamp and socket back into place.
(See Figure C below.)
Lamp Replacement
Figure B
Figure C
SI561 IM_v2 1106.indd 9 12/7/06 4:08:18 PM
Statement of FCC Compliance — Model SI561
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
SI561 IM_v2 1106.indd 10 12/7/06 4:08:18 PM
Inhaltsverzeichnis
Beliebte Wohnraumbeleuchtung Handbücher anderer Marken
JONATHAN Y
JONATHAN Y JYL5019A Bedienungsanleitung
JONATHAN Y
JONATHAN Y JYL6007A Bedienungsanleitung
Philips
Philips Ledino 31606/11/16 Bedienungsanleitung
Salus
Salus UG600 Bedienungsanleitung
Safavieh Lighting
Safavieh Lighting CANDRI TBL4427A Bedienungsanleitung
Hunter
Hunter Bullet Spotlight Kit Gebrauchsanweisung
Schwaiger
Schwaiger NFL45 Bedienungsanleitung
FRITZ HANSEN
FRITZ HANSEN AQ01 PLUG-IN Bedienungsanleitung
MOOD
MOOD CORSIN JY-16 Bedienungsanleitung
Safavieh Lighting
Safavieh Lighting KREMP TBL4409A Bedienungsanleitung
JONATHAN Y
JONATHAN Y JYL8019 Bedienungsanleitung
XTRASUN
XTRASUN XTDEOKT1 Bedienungsanleitung