Sharper Image 208561 Bedienungsanleitung

- 1 -

Item No. 208561

WIRELESS TIRE PRESSURE MONITORING SYSTEM

User Guide

Thank you for purchasing the Wireless Tire Pressure Monitoring System. Please take a moment

to read this guide and store it for future reference.

- 2 -

INTRODUCTION

The Tire Pressure Monitoring System (TPMS) monitors your tire pressure and temperature in

real time. It includes 4 wireless sensors for your tires and a solar-powered display for your

dashboard. If abnormal tire pressure and/or temperature is detected, the system will send a

warning sound and a bright ﬂashing icon to inform the driver in real time. This can help avoid

tire-related accidents and ensure the safety of drivers and passengers.

FEATURES

• Monitors tire pressure and temperature in real time

• Sends warning alerts to dashboard display unit

• Helps you maintain proper pressure for comfort, tire longevity and fuel economy

• Includes solar-powered display unit

• Includes 4 battery-powered wireless tire sensors (4 CR1632 batteries included)

• Suitable for all vehicles with 4 tires, including cars, commercial vehicles, oﬀ-road vehicles,

jeeps and vans

• Measures tire pressure in PSI and BAR

• Maximum tire pressure 87 PSI (6 BAR)

• Measures temperature in °C and °F

• Maximum temperature 158°F (70°C)

BUTTON DESCRIPTIONS

A. LEFT button — In standby mode, press to toggle

through selections.

B. MENU / CONFIRM Button — In standby mode, long

press for 3 seconds to enter the MENU mode. Select the

parameter to be adjusted, then use the LEFT and RIGHT

keys to adjust your selection(s). Press MENU again to

conﬁrm your setting, save and exit.

C. RIGHT button — In standby mode, press to toggle through selections.

Long press for 3 seconds to enter PAIRING mode.

D. USB Charging Port

DISPLAY SCREEN ICON DESCRIPTIONS

1. Solar charging in progress

2. Tire temperature display

3. Tire pressure display

4. Battery power display

5. Tire pressure unit (BAR or PSI)

6. Temperature unit display (°C or °F)

7. Tire position indicator

- 3 -

INSTALLING THE WIRELESS SENSORS

1. Screw in the anti-theft nut.

2. Tighten the sensor.

3. Tighten the anti-theft nut counterclockwise to hold the sensor.

4. After tightening the sensor, use a wrench to tighten the anti-theft nut counterclockwise.

SETUP AND PAIRING

In the Standby state, press and hold the RIGHT button for 3 seconds to enter the conﬁguration

pairing mode. Press the RIGHT button again to enter the pairing mode, as shown in the ﬁgure

below:

- 4 -

At this time, the “0” on the interface is ﬂashing. Press the RIGHT button to enter the pairing

mode. The left front tire displays “00” and small tire ﬂashing, indicating a successful pairing.

Next, the right front tire will pair automatically. The screen displays “00” and a small tire

ﬂashing, indicating a successful pairing.

Next, the right rear tire will pair automatically. The screen displays “00” and a small tire

ﬂashing, indicating a successful pairing.

Next, the left rear tire will pair automatically. The screen displays “00” and a small tire ﬂashing,

indicating a successful pairing. The unit will then return to the main interface.

The pairing order is: “Left front” -> “Right front” -> “Rear right” -> “Rear left.”

CHANGING THE UNIT SETTINGS

NOTE: The default pressure unit is BAR. The default temperature unit is °C.

Choosing BAR or PSI

In standby mode, long press the MENU button for 3 seconds to enter the system setting

state. The BAR icon appears in the lower left corner. Use the LEFT and RIGHT buttons to select

PSI. After selecting the desired unit, press the MENU button to complete the setting.

Choosing Celsius or Fahrenheit

In standby mode, long press the MENU button for 3 seconds to enter the system setting

state. Press the MENU key ONCE to enter the temperature unit setting. Use the LEFT and RIGHT

buttons to select °F or °C. After selecting the desired unit, press the MENU button to complete

the setting.

TERMINOLOGY

BAR: BAR is a metric unit and is most commonly used to determine air pressure in tires. BAR is

used primarily in countries that use the metric system.

PSI: Commonly used in the U.S., pounds per square inch (PSI) is the amount of pressure air

exerts when inside the tire.

LEFT FRONT WHEEL

LEFT REAR WHEEL REAR RIGHT WHEEL

REAR FRONT WHEEL

- 5 -

CHANGING THE TIRE PRESSURE VALUES

NOTE: The default pressure unit is BAR. The default low pressure is 26 PSI (1.8 BAR). The default

high pressure is 46 PSI (3.2 BAR).

ABOVE: Examples of low and high pressure limits.

Front Tires – Low Pressure Limit

In standby mode, long press the MENU button for 3 seconds to enter the system setting state.

Press the MENU key TWICE to enter the low pressure limit setting of the front tire air pressure.

Use the LEFT and RIGHT buttons to set the low limit of the air pressure. After selecting the

desired pressure, press the MENU button to save and exit.

Front Tires – High Pressure Limit

In standby mode, long press the MENU button for 3 seconds to enter the system setting state.

Press the MENU key THREE TIMES to enter the high pressure limit setting of the front tire air

pressure. Use the LEFT and RIGHT buttons to set the high limit of the air pressure. After

selecting the desired pressure, press the MENU button to save and exit.

Rear Tires – Low Pressure Limit

In standby mode, long press the MENU button for 3 seconds to enter the system setting state.

Press the MENU key FOUR TIMES to enter the low pressure limit setting of the rear tire air

pressure. Use the LEFT and RIGHT buttons to set the low limit of the air pressure. After

selecting the desired pressure, press the MENU button to save and exit. Front Tires – High

Front Tires – High Pressure Limit

In standby mode, long press the MENU button for 3 seconds to enter the system setting state.

Press the MENU key FIVE TIMES to enter the high pressure limit setting of the rear tire air

pressure. Use the LEFT and RIGHT buttons to set the high limit of the air pressure. After

selecting the desired pressure, press the MENU button to save and exit.

CHANGING THE HIGH TEMPERATURE LIMIT

NOTE: The default high temperature is 158°F (70°C).

ABOVE: Example of high pressure limit.

In standby mode, long press the MENU button for 3 seconds to enter the system setting state.

Press the MENU key SIX TIMES to enter the high temperature limit setting. Use the LEFT and

RIGHT buttons to set the high temperature limit. After selecting the desired pressure, press the

MENU button to save and exit.

- 6 -

TIRE EXCHANGE (TIRE ROTATION)

When you rotate your tires, there is no need to switch the sensors. Simply tell the device which

tires have been swapped.

In standby mode, long press MENU for 3 seconds to enter the system setting state. Press MENU

SEVEN TIMES to enter the tire exchange mode. Short press the RIGHT key ONCE to conﬁrm the

tire exchange mode. There will be 2 tire icons ﬂashing continuously.

Short press the MENU button to select the tire position that needs to be swapped, and enter

the tire swap operation. (The default is “LEFT front tire and RIGHT front tire swap.”) Conﬁrm

the swap by long pressing the RIGHT button.

SHORT PRESS THE MENU KEY TO SELECT FROM THESE OPTIONS:

• Left front tire and right front tire exchange >>

• Left rear tire and right rear tire exchange >>

• Left front tire and left rear tire exchange >>

• Right front tire and right rear tire exchange >>

• Right front tire and left rear tire exchange >>

• Left rear tire and right rear tire exchange >>

Long press the RIGHT button to conﬁrm any two-tire swap combination state. The exchange is

now complete.

WARNINGS AND ALARMS

1. Air Leak Warning — When the air pressure of any tire is lower than 26 PSI (1.8 BAR), the

buzzer will sound an alarm, and the corresponding tire icon and pressure data, TPMS icon and

air leak icon will ﬂash continuously. Press any key to stop the buzzer alarm.

2. Low Pressure Warning — When any tire pressure is detected to be lower than 75% of the

standard tire pressure, the buzzer will sound an alarm, and the corresponding tire icon and

pressure data, TPMS icon and low pressure icon will ﬂash continuously. When the tire pressure

is corrected, the alarm is released.

NOTE: The factory default low-pressure alarm threshold is 26 PSI (1.8 BAR). This value can be

adjusted with the steps above. See your car’s owner’s manual for more details about your

correct tire pressure.

- 7 -

3. High Pressure Warning — When it is detected that any tire pressure is higher than 125% of

the cold tire standard tire pressure value, the buzzer will sound, and the corresponding tire icon

and pressure data and the TPMS icon and high pressure icon will ﬂash continuously. When the

tire pressure is lowered, the alarm is cleared.

NOTE: The factory default high-pressure alarm threshold is 46 PSI (3.2 BAR). This value can be

adjusted with the steps above. See your car’s owner’s manual for more details about your

correct tire pressure.

4. High Temperature Warning — When the temperature of any tire is higher than the preset

temperature threshold (158°F/70°C), the buzzer will sound an alarm, and the corresponding tire

icon and temperature data, TPMS icon and high temperature icon will ﬂash continuously. When

the temperature is lower than the alarm threshold, the alarm is cleared.

CHANGING SENSOR BATTERIES

1. Turn the nut clockwise to separate the nut and the sensor, and then remove the sensor

counterclockwise.

2. Remove the anti-theft nut and use a wrench to unscrew the upper cover of the sensor in a

counterclockwise direction.

3. Take out the old battery from the battery clamp. Make note of the battery position (“+”

should be facing up).

4. Install a new lithium battery (CR1632).

5. Screw on the upper cover of the sensor, and then tighten it clockwise with a wrench.

NOTE: Always dispose of batteries responsibly. Do not allow children to handle or swallow

these batteries.

IMPORTANT NOTES

• Generally, tires will have natural air leakage. The pressure of tires will decrease over time. This

is a normal phenomenon and is not directly related to the installation of this product.

• During the driving process the air in your tires can expand or contract, causing changes in tire

pressure. This is a normal phenomenon and is not directly related to the installation of this

product.

DISPLAY SPECIFICATIONS

• Working temperature: -20 °C~80 °C

• Storage temperature: -30 °C~85 °C

• Electric voltage: DC 5V

• Battery capacity: 400 mAh

• Frequency: 433.92MHz ± 20.00MHZ

• Dimensions: 3.7” L x 3.3” W x 1.1” H

• Weight: 0.1 lbs.

SENSOR SPECIFICATIONS

• Working temperature: -20 °C~75 °C

• Storage temperature: -30 °C~85 °C

• Pressure range: 0~6.0bar

• Pressure accuracy: +/-0.2bar

• Temperature accuracy: +/-3 °C

• Transmitting power: <5dB

• Frequency: 433.92MHz ± 20.00MHZ

Inhaltsverzeichnis

Andere Sharper Image Messgerät Handbücher

Sharper Image

Sharper Image 208667 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung