Sherwood RD-6504 Bedienungsanleitung

• Be sure to connect speakers firmly

and correctly according to the chan-

nel (left and right) and the polarity (+

and -). If the connections are faulty,

no sound will be heard from the

speakers, and if the polarity of the

speaker connection is incorrect, the

sound will be unnatural and lack

bass.

■Caution

• Be sure to use the speakers with

the impedance of 6 ohms or above.

• Do not let the bare speaker wires

touch each other or any metal part

of this unit. This could damage this

unit and/or the speakers.

• Never touch the speaker terminals

while the AC input cord is connect-

ed to the wall AC outlet. Doing so

could result in electric shocks.

Placi g Speakers

QUICK START GUIDE

Co ecti g Speakers

■If you have 5.1 ch speakers

1. Front Left

2. Front Right

3. Center

4. Surround Left

5. Surround Right

6. Subwoofer

•This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound.

•For full details on using this unit, refer to the main operating instructions.

•Please be certain that this unit is unplugged from the AC outlet before making any connections.

RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 2

Co ecti g TV & DVD Player

QUICK START GUIDE

• There are two types of video jacks (CO PONENT,(composite) VIDEO) for analog video connections and the HD I

connector for digital video and audio connections.

Connect them to the corresponding video jacks according to their capability.

• For your reference, the exellence in picture quality is as follows : "HD I" > "CO PONENT" > "(composite) VIDEO".

• When making CO PONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or "B-Y", "PB") and "PR/CR"

to "CR" (or "R-Y", "PR").

■Connecting a TV

• Connect the TV to the same type of onitor video output that you did connect to the DVD player, as shown.

■Connecting a DVD Player

• Use a Component, S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video

output on your DVD player, as shown.

• Use an Optical or Coaxial cable to connect this unit's OPTICAL IN or COAX IN 2 to the optical output or the coaxial

output on your DVD player. (You don't need to do both.)

• Use an Audio (analog) cable to connect this unit's VIDEO 2 (L/R) to audio output on your DVD player.

• Use a HD I cable to connect this unit's HD I 2 to HD I output on your DVD player.

RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 3

Tur i g o the U it

Playi g a DVD Player (VIDEO 2)

QUICK START GUIDE

1. Connect the AC input cord.

2. Press the [POWER] switch on the front panel to enter the standby mode.

3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the

remote control to enter the operating mode.

4. Press the [SPEAKER] button to switch the speakers on.

Then the SPEAKER indicator lights up and the sound can be heard from the speakers.

1. Turn on your DVD player and TV.

2. Select the appropriate input on your TV.

3. Press the [VIDEO] button on the front panel to select [VIDEO 2] input source.

On the remote control, press the [VIDEO 2] button directly.

4. Press the [D/A ODE] button to select the digital input ([o(optical)], [c2(coaxial 2)] or [H(HD I audio)]) or the

analog input ([A(analog)]). When the selected digital input is not connected, the [DIGITAL] indicator flickers and

the analog input is automatically selected.

5. Start playback on your DVD player.

6. Adjust the volume.

RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 4

E joyi g Surrou d Sou d

■Whe CD or VIDEO 1 ~ 2 is selected as a i put source

1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode

or the manual surround mode.

Auto Surround ode : The optimum surround mode will be automatically selected depending on the signal format

being input.

anual Surround ode : You can select the desired of different surround modes selectable for the signal being

input with using the [ ULTI CONTROL] knob or the [SURROUND </>] buttons.

■Note :

• When the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and

can select the surround mode as desired (the manual surround mode).

■Whe selecti g the ma ual surrou d mode.

2. Rotate the [ ULTI CONTROL] knob or press the [SURROUND </>] buttons to select the desired surround mode.

• Then the surround mode changes depending on the input signal format.

■To ca cel the surrou d mode for stereo operatio .

3. Press the [STEREO] button.

• Then either the stereo mode or the 2 CH downmix mode is selected depending on the signal format which is

being input.

• To cancel either the stereo mode or the 2 CH downmix mode, rotate the [ ULTI CONTROL] knob or press the

[SURROUND </>] buttons to select the surround mode.

■Note :

• You should adjust the speaker settings for the optimum sound acoustics according to your environment and

speaker layout. (For details, refer to "SETTING THE SPEAKER SETUP" on the main operating instructions.)

QUICK START GUIDE

([AUTO]) lights up)

([AUTO]) goes off)

5227-00000-086-0S

RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 1

Andere Handbücher für RD-6504

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sherwood Empfänger Handbücher

Sherwood

Sherwood RV-4060R Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-863 Bedienungsanleitung

Sherwood

Sherwood R-807 Bedienungsanleitung

Sherwood

Sherwood R-125RDS Bedienungsanleitung

Sherwood

Sherwood RD-7502 Bedienungsanleitung

Sherwood

Sherwood RD-6505 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-865 Bedienungsanleitung

Sherwood

Sherwood NewCastle R-945 Bedienungsanleitung

Sherwood

Sherwood VR-758 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-965 Installations- und Betriebshandbuch

Sherwood

Sherwood Newcastle R-963 Bedienungsanleitung

Sherwood

Sherwood RVD-8090R Bedienungsanleitung

Sherwood

Sherwood R-507 Bedienungsanleitung

Sherwood

Sherwood RD-7405HDR Bedienungsanleitung

Sherwood

Sherwood RD-8601 Bedienungsanleitung

Sherwood

Sherwood RD-5503 Bedienungsanleitung

Sherwood

Sherwood R-807 Bedienungsanleitung

Sherwood

Sherwood RD-8504 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-965 Bedienungsanleitung

Sherwood

Sherwood RD-7106 Bedienungsanleitung

Sherwood

Sherwood R-945MKII Bedienungsanleitung

Sherwood

Sherwood RD-6105R Bedienungsanleitung

Sherwood

Sherwood RD-925 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

Dish Network

Dish Network Satellite Television Bedienungsanleitung