Sherwood RD-8504 Bedienungsanleitung

Front

right

Front

left

• Be sure to connect speakers firmly and correctly

according to the channel (left and right) and the

polarity (+ and -). If the connections are faulty, no

sound will be heard from the speakers, and if the

polarity of the speaker connection is incorrect, the

sound will be unnatural and lack bass.

■Caution

• Be sure to use the speakers with the impedance

of 6 ohms or above.

• Do not let the bare speaker wires touch each

other or any metal part of this unit. This could

damage this unit and/or the speakers.

• Never touch the speaker terminals while the AC

input cord is connected to the wall AC outlet.

Doing so could result in electric shocks.

Placing Speakers

QUICK START GUIDE

Connecting Speakers

■If you have 5.1 ch speakers ■If you have 7.1 ch speakers

1. Front eft

2. Front Right

3. Center

4. Surround eft

5. Surround Right

6. Subwoofer

7. Surround Back eft

8. Surround Back Right

•This guide shows you how to connect your speakers and BD/DVD player and enjoy multi-channel surround sound.

•For full details on using this unit, refer to the main operating instructions.

•Please be certain that this unit is unplugged from the AC outlet before making any connections.

RD-8504(AG)-Quick_091117:RD-8504(AG)-Quick 2009-11-19 오 10:07 페이지 1

Connecting TV & BD/DVD Player

QUICK START GUIDE

• There are three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO) for analog video connections

and the HDMI connector for digital video and audio connections.

Connect them to the corresponding video jacks according to their capability.

• For your reference, the exellence in picture quality is as follows : "HDMI" > "COMPONENT" >"S-VIDEO" > "(com-

posite) VIDEO".

• When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or "B-Y", "PB") and "PR/CR"

to "CR" (or "R-Y", "PR").

• The HDMI connection can carry uncompressed digital video signals and digital audio signals.

■Connecting a TV

• Connect the TV to the same type of Monitor video output that you did connect to the BD/DVD player, as shown.

■Connecting a BD/DVD Player

• Use a Component S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video

output on your BD/DVD player, as shown.

• Use an Optical or Coaxial cable to connect this unit's OPT IN 2 or COAX IN 2 to the optical output or the coaxial

output on your BD/DVD player. (You don't need to do both.)

• Use an Audio (analog) cable to connect this unit's VIDEO 2 ( /R) to audio output on your BD/DVD player.

• Use a HDMI cable to connect this unit's HDMI 2 to HDMI output on your BD/DVD player.

RD-8504(AG)-Quick_091117:RD-8504(AG)-Quick 2009-11-19 오 10:07 페이지 2

Turning on the Unit

Playing a BD/DVD Player (VIDEO 2)

QUICK START GUIDE

1. Connect the AC input cord.

2. Press the [POWER] switch on the front panel to enter the standby mode.

3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the

remote control to enter the operating mode.

4. Press the [SPEAKER] button to switch the speakers on.

Then the SPEAKER indicator lights up and the sound can be heard from the speakers.

1. Turn on your BD/DVD player and TV.

2. Select the appropriate input on your TV.

3. Rotate the [INPUT SE ECTOR] knob on the front panel to select [V2/IPOD]

input source. On the remote control, press the [VIDEO 2] button directly.

■In case that the HDMI connections between components are not made

4. When you want to play the digital signals from the connected digital input,

press the [AUDIO ASSIGN] button to display “AUD ~” and then rotate the [MU TI CONTRO ] knob or press the

CURSOR EFT/RIGHT buttons to select the desired of [OPT 2] and [COX 2].

■Note :

• If the Audio Mode is set to the mode other than "Digital" for VIDEO 2 input source on the INPUT SETUP menu,

you cannot hear the sound from the selected digital input. (For details, refer to "SETTING THE INPUT SETUP"

on the main operating instructions.)

5. Start playback on your BD/DVD player.

6. Adjust the volume.

RD-8504(AG)-Quick_091117:RD-8504(AG)-Quick 2009-11-19 오 10:07 페이지 3

En oying Surround Sound

2 1 3

1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode

or the manual surround mode.

Auto Surround Mode : The optimum surround mode will be automatically selected depending on the signal format

being input.

Manual Surround Mode : You can select the desired of different surround modes selectable for the signal being

input with using the [MU TI CONTRO ] knob or the [SURROUND </>] buttons.

■When selecting the manual surround mode.

2. Rotate the [MU TI CONTRO ] knob or press the [SURROUND </>] buttons to select the desired surround mode.

• Then the surround mode changes depending on the input signal format.

■To cancel the surround mode for stereo operation.

3. Press the [STEREO] button.

• Then either the stereo mode or the 2 CH downmix mode is selected depending on the signal format which is

being input.

• To cancel either the stereo mode or the 2 CH downmix mode, rotate the [MU TI CONTRO ] knob or press the

[SURROUND </>] buttons to select the surround mode.

■Note :

• You should adjust the speaker settings for the optimum sound acoustics according to your environment and

speaker layout. (For details, refer to "SETTING THE SPEAKER/ROOM EQ SETUP" on the main operating

instructions.)

QUICK START GUIDE

([AUTO] lights up)

([AUTO] goes off)

5227-00000-129-0S

RD-8504(AG)-Quick_091117:RD-8504(AG)-Quick 2009-11-19 오 10:07 페이지 4

Andere Handbücher für RD-8504

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sherwood Empfänger Handbücher

Sherwood

Sherwood Newcastle R-865 Bedienungsanleitung

Sherwood

Sherwood Newcastle HSB-6501 Bedienungsanleitung

Sherwood

Sherwood BT-R7 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-965 Betriebsanleitung

Sherwood

Sherwood R-672 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-965 Bedienungsanleitung

Sherwood

Sherwood RD-606i Bedienungsanleitung

Sherwood

Sherwood RD-5503 Bedienungsanleitung

Sherwood

Sherwood RD-6108 Bedienungsanleitung

Sherwood

Sherwood Newcastle VR-654BD Bedienungsanleitung

Sherwood

Sherwood RD-925 Bedienungsanleitung

Sherwood

Sherwood RD-7503 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-972 Bedienungsanleitung

Sherwood

Sherwood RD-6105 Bedienungsanleitung

Sherwood

Sherwood RX-773 Bedienungsanleitung

Sherwood

Sherwood RD-5405 Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Sherwood

Sherwood RD-7500 Bedienungsanleitung

Sherwood

Sherwood Newcastle R-965 Bedienungsanleitung

Sherwood

Sherwood RD-6505 Bedienungsanleitung

Sherwood

Sherwood R-807 Bedienungsanleitung

Sherwood

Sherwood NewCastle R-945 Bedienungsanleitung

Sherwood

Sherwood NetBoxx R-904N Bedienungsanleitung

Sherwood

Sherwood RV-4060R Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

Dish Network

Dish Network Satellite Television Bedienungsanleitung