Shining 3D Transcan C Bedienungsanleitung
A Professional 3D Scanner for Diverse Industries
Getting Started with Transcan C
User Manual
Transcan C
Preparation
Equipment List
Computer Requirements
Recommended setting
OS: Win10，64 bits
CPU：I7-8700 or higher
Graphics card：NVIDIA GTX1060 or higher
RAM：≥32G
VRAM：≥4G
USB port：high speed USB 3.0 port 1 USB 2.0 port
Power adapter*2
Power cable*2
Calibration board
(150mm/300mm) Calibration board
bracket
Device connection
cable
Calibration pad Marker Turntable
USB drive
Turntable connection
cable Tripods
Scanner head
Light Box Recommendation
Power：60W
lumen：12000-13000LM
input voltage：110-240V
color temperature：5500K±200K
STEP
01
STEP
02
1. Open the tripod and place it on the ground. Adjust the
tripod’s three feet.
2. Adjust the lock ② to release and adjust vertical slide rod to
an appropriate height, and the lock ② needed to be locked
after the adjustment.
3. Remove the adapter block from the tripod, place it into the
slot at the bottom of the scanner assembly, then tighten the
screws.
4. Insert the scan head assembly into the top groove of the
tripod, adjust the orientation and tighten the screws to fix it
as shown.
5. Based on the need, shake the rocker to adjust the device
height. Then tighten the latch.
Hardware Installation
Scanner Adjustment
1. Confirm that power switch ④ is not pressed.
2. Connect the power cable to the adapter port ⑥ first.
3. Inserted the adapter socket ⑤ into the device ③ port.
4. Plugin the power adapter to power source.
5. Connect the device to computer USB 3.0 port ② with the
device connection cable.
6. If using a light box, plug the light box connection cable into
port ①.
Connect Scanner
2
6
1
4
53
2
2
1
2
3
4
6
5
1
2
Adapter
Block
Hardware Installation
STEP
03 Turntable connection
STEP
04
Note：
1. The lightbox switch is used in conjunction with the lightbox switch button in
the software white balance interface.
2. Make sure both the lightbox switch are on for white balance testing and
texture project scanning.
3. After creating a new project in the scanning interface, when selecting the
texture project, it will prompt the status of the lightbox in the current texture
scanning state, please choose whether to access the lightbox according to
the prompt information.
4. Whether to open the lightbox while scanning, depends on whether open the
lightbox while doing the white balance test.
5. Make sure the light box connection cable is connected in the correct order,
and the ports connected to each lamp are connected to one-to-four adapter
cable.
Lightbox connection (optional)
1. Connect the scanner lightbox cable to the lightbox power
cable .
2. Connect the scanner lightbox cable to the one-to-four
connection cable .
3. Connect the scanner lightbox cable to the LAMP
interface shown on the back of the scanner.
1
4
3
5
2
1.Connect the turntable connection cable ⑤ into the
turntable USB port ①.
2.Connect the turntable connection cable ④ into computer
USB port.
3.Connect the turntable power cable ③ into the turntable
port ②.
4.Plugin the power adapter to power source.
1
2
3
4
5
5
1
4
3
2
LAMP
12
3
4
5
Open http://www.einscan.com/support/download/。
Select your scanner model to download the software. Follow
the guide to finish software installation.
Equipment Adjustment
Software Download
STEP
01
STEP
02
1.Software installation
2.Software activation
3.Scanner adjustment
4.Select scanning range
5.Adjust camera position according to the range
6.Adjust projector focus
7.Adjust camera angle
8.Adjust camera aperture
9.Adjust camera focus
10.Turntable & lightbox connection check
Calibrate Video
Calibrate
Calibrate process
Calibration is the process to ensure the device will scan with the optimal
accuracy and scan quality. When the software installed the first time, it
automatically goes to calibration interface.
Different calibration boards are used for scanning ranges of 300mm
and 150mm. Select the corresponding calibration board as shown in
the calibration interface.
Note：
1.Make sure to protect the calibration board and keep it clean, no
scratches or stains on both side.
2.The calibration board is matched to the Device with same Serial
Number. Doing the calibration with an incorrect calibration board will fail
to generate good scan data or optimum accuracy.
3.Clean with pure water only, do not use alcohol or other chemical liquid
to clean the calibration board.
4.To prevent damage to the calibration board, do not drop the board,
and do not place heavy objects or irrelevant objects on the board.
5.After usage, store the calibration board in the velvet bag immediately.
Calibrate
Cameras calibrate
White Balance
Calibration
Finish Calibration
Operate positions according
to the software wizard
Start to capture data
Capturing completed
Calibration succeed Calibration failed
Restart equipment
adjustment
Scan Process
Create Mesh Data
post-processing
Data
measurement
Data
reservation
Scan preparation
Create
/Import project
Check working
distance
Select turntable mode,
brightness, and resolution
Texture scan Non-texture
vscan
Scan
Edit Scanning Data
Scan completed
Alignment Continue to scan
Hard-to-scan objects
Transparent object
Strongly surface reflective objects
Shiny and black object
Objects that undergo deformation
Hollow objects such as Eiffel Tower souvenirs
Hair and similar lint-like structures
Spray on the surface
Solution
Recommend not to scan
Scan technics
Summarize
Scan Range（mm）
Accuracy（mm） ≤0.05
300 X 190
Point Distance（mm）
Alignment Mode
0.03；0.07；0.11 0.06；0.15；0.23
150 X 96
Marker Alignment; Feature Alignment;
Manually Alignment
www.shining3d.com
Technical support
Register at support.shining3d.com for support
or contact through:
For more videos of the scanners, please follow
our YouTube channel “ SHINING 3D” .
APAC Headquarters
SHINING 3D Tech. Co., Ltd.
Hangzhou, China
P: +86-571-82999050
Email: [email protected]
No. 1398, Xiangbin Road, Wenyan,
Xiaoshan,Hangzhou, Zhejiang, China,
311258
Americas Region
SHINING 3D Technology Inc.
San Francisco, United States
P: +1415-259-4787
Email: [email protected]
1740 César Chávez St. Unit D.
San Francisco, CA 94124
EMEA Region
SHINING 3D Technology GmbH.
Stuttgart, Germany
P: +49-711-28444089
Email: [email protected]
Breitwiesenstraße 28, 70565,
Stuttgart, Germany
Inhaltsverzeichnis
Andere Shining 3D Scanner Handbücher
Shining 3D
Shining 3D Freescan Combo Bedienungsanleitung
Shining 3D
Shining 3D FreeScan UE Bedienungsanleitung
Shining 3D
Shining 3D EinScan-Pro+ Bedienungsanleitung
Shining 3D
Shining 3D EinScan Pro 2X Bedienungsanleitung
Shining 3D
Shining 3D FreeScan UE Pro Bedienungsanleitung
Shining 3D
Shining 3D EINSTAR Bedienungsanleitung
Shining 3D
Shining 3D EinScan-SE Bedienungsanleitung
Shining 3D
Shining 3D EinScan HX Bedienungsanleitung
Shining 3D
Shining 3D EXScan H Bedienungsanleitung
Shining 3D
Shining 3D EinScan HX Bedienungsanleitung
Shining 3D
Shining 3D EinScan-SP Bedienungsanleitung
Shining 3D
Shining 3D EinScan H Bedienungsanleitung
Shining 3D
Shining 3D EinScan Pro HD Bedienungsanleitung
Shining 3D
Shining 3D EinScan Pro 2X Bedienungsanleitung
Shining 3D
Shining 3D EinScan Pro 2X 2020 Bedienungsanleitung
Shining 3D
Shining 3D EinScan H Bedienungsanleitung
Shining 3D
Shining 3D EinScan-Pro Series Bedienungsanleitung
Shining 3D
Shining 3D EinScan HX Bedienungsanleitung
Shining 3D
Shining 3D Aoralscan 3 Bedienungsanleitung
Shining 3D
Shining 3D FreeScan UE Bedienungsanleitung
