Shure 522 Bedienungsanleitung

Model 522 User Guide

27C687 (Rev. 6) Printed in U.S.A.

MODEL 522

BASE-STATION MICROPHONE

The Model 522 is a dynamic base-station microphone for radio

communications, paging, and dispatching systems. Its cardioid

(unidirectional) pickup pattern suppresses unwanted background noise

from nearby dispatchers, ventilating equipment, or office machines.

It also can reduce feedback in public address paging applications.

Features

• Dual impedance (19 to 300 ohms or High)

• lmpedance change switch for convenient change-over

• Finger-tip control bar (locking or non-locking action) to actuate

microphone circuit and an external relay or control circuit

• Long-life switch to satisfy rigorous requirements of

communications and paging systems

• Sturdy, high impact ARMO-DUR®‚ base and microphone case

• Adjustable microphone height

• Dependable under most operating conditions

PRESS-TO-TALK SWITCH OPERATION

Press and hold the bar switch to talk. To lock the switch, press and pull it

forward. To unlock the switch, move the bar back and release.

IMPEDANCE SELECTION

Use the switch located under the microphone base, near the cable entry,

to select high ("HI") or low ("LO") impedance.

Use the low-impedance position for long cable lengths under conditions

of severe hum disturbance. Use Shure Model A95 Series Line Matching

Transformers when using a low-impedance microphone line with a high-

impedance amplifier input.

LOGIC CONNECTIONS

The RED and BLACK leads may be used to control an external relay or

switching circuit.

AUDIO CONNECTIONS

Unbalanced high-impedance operation:

Set the impedance switch to the “HI” position (as shipped). Connect the

GREEN cable lead and the shield to the amplifier chassis ground. The

WHITE cable lead is the “hot” conductor.

Balanced-line low-impedance operation:

Set the impedance switch to the “LO” position. Connect the shield to the

amplifier chassis ground. The WHITE and GREEN cable leads are the

“hot” conductors.

Table 1. Cable-to-Connector Wiring

INPUT TYPE WIRE

COLOR

FUNCTION XLR

CONNECTOR

1/4 IN.

PHONE

PLUG

UNBALANCED

WHITE AUDIO PIN 2 TIP

GREEN AUDIO

GROUND

PIN 3 SLEEVE

SHIELD CHASSIS

GROUND

PIN 1 SLEEVE

BALANCED

WHITE AUDIO + PIN 2 TIP

GREEN AUDIO – PIN 3 RING

SHIELD CHASSIS

GROUND

PIN 1 SLEEVE

Asia, Pacific:

Shure Asia Limited

22/F, 625 King’s Road

North Point, Island East

Hong Kong

Phone: 852-2893-4290

Fax: 852-2893-4055

Email: [email protected]

United States, Canada, Latin

America, Caribbean:

Shure Incorporated

5800 West Touhy Avenue

Niles, IL 60714-4608 USA

Phone: 847-600-2000

Fax: 847-600-1212 (USA)

Fax: 847-600-6446

Email: [email protected]

Europe, Middle East, Africa:

Shure Europe GmbH

Jakob-Dieffenbacher-Str. 12,

75031 Eppingen, Germany

Phone: 49-7262-92490

Fax: 49-7262-9249114

Email: [email protected]

SPECIFICATIONS

Type

Dynamic

Frequency Response

60 to 11,000 Hz

Polar Pattern

Cardioid

Impedance

Dual. Microphone rating impedance is 150 ohms (260 ohms actual) for

connection to microphone inputs rated at 19 to 300 ohms and "High"

for connection to high-impedance microphone inputs. Switch is in high-

impedance position as supplied.

SENSITIVITY (at 1,000 Hz): LOW HlGH

Open Circuit Voltage* -57.5 dB -38.5 dB

(Ref. 1V/Pascal (1.3 mV) (12 mV)

*(1 Pa = 94 dB SPL)

Switch

Press-to-Talk Switch: lockable, for microphone and an external relay or

control circuit. Microphone circuit normally shorted in both high and low

impedance.

lmpedance Selection Switch: provides either high- or low-impedance

operation.

Cartridge Shock Mount

lnternal rubber vibration-isolator

Cable

2.1 m (7 ft) four-conductor, two conductors shielded non-detachable

Case

Two-tone gray ARMO-DUR‚ with dull-chrome-plated steel screen

Net Weight

736 grams (1 Ib 10 oz)

Shipping Weight

1020 grams (2 Ib 4 oz)

REPLACEMENT PARTS

Cable ......................................C31C

On-Off Switch ..............................K141S

For additional service or parts information, please contact

Shure's Service department at 1-800-516-2525. Outside

the United States, please contact your authorized Shure

Service Center.

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure Microflex MX418D Betriebsanleitung

Shure

Shure 545SD Bedienungsanleitung

Shure

Shure MV5 Bedienungsanleitung

Shure

Shure 522 Bedienungsanleitung

Shure

Shure 577B Bedienungsanleitung

Shure

Shure KSM44A Bedienungsanleitung

Shure

Shure KSM137 Bedienungsanleitung

Shure

Shure SM81 Bedienungsanleitung

Shure

Shure 545 UNIDYNE III Bedienungsanleitung

Shure

Shure PG27-USB Montageanleitung

Shure

Shure MOTIV MVL Bedienungsanleitung

Shure

Shure PGA STUDIO MICROPHONE KIT Bedienungsanleitung

Shure

Shure Beta 53 Bedienungsanleitung

Shure

Shure WFR-1D Bedienungsanleitung

Shure

Shure Spher-O-Dyne 533AV Bedienungsanleitung

Shure

Shure SV100 Bedienungsanleitung

Shure

Shure UNISPHERE 565SD Bedienungsanleitung

Shure

Shure WL50 Bedienungsanleitung

Shure

Shure SM7dB Technisches Handbuch

Shure

Shure A88SM Bedienungsanleitung

Shure

Shure BG 1.1 Bedienungsanleitung

Shure

Shure PG Alta Series Bedienungsanleitung

Shure

Shure Microflex Advance MXA910 Bedienungsanleitung

Shure

Shure W15HT/58 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung