Shure MVX2U Bedienungsanleitung

MVX2U

MVX2U Digital Audio Interface

User guide for MVX2U Digital Audio Interface

Version: 1.0 (2023-B)

Shure Incorporated
2/16
Table of Contents
MVX2U   MVX2U Digital Audio Interface 3
Important Product Information 3
IMPORTANT SAFETY INSTRUCTIONS 3
WARNING 4
Information to the user 4
General Description 4
Features 5
MVX2U Inputs and Outputs 5
LED Status 6
Quick Setup 6
Auto Level Mode 6
Near 7
Far 7
Additional Tips 8
The Shure MOTIV Desktop App 8
Mic Setup: Auto Level 8
Mic Setup: Manual 9
Preset Modes 10
Monitor Mix Blend 10
Advanced Mic Settings 11
Limiter 11
Compressor 11
High Pass Filter 11
Equalizer 11
Streaming Tips 11
Control your Levels 11
Monitor Your Sound 11
Mounting Instructions 11
Troubleshooting 12
Firmware Update 12
MOTIV Desktop App System Requirements 13
System Requirements and Compatibility: Mac 13
System Requirements and Compatibility: Windows 13
Specifications 13
Accessories 15
Furnished Accessories 15
Certifications 15

Shure Incorporated

3/16

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

MVX2U 

MVX2U Digital Audio Interface

Important Product Information

IMPORTANT SAFETY INSTRUCTIONS

READ these instructions.

KEEP these instructions.

HEED all warnings.

FOLLOW all instructions.

DO NOT use this apparatus near water.

CLEAN ONLY with dry cloth.

DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance

withthemanufacturer’sinstructions.

DONOTinstallnearanyheatsourcessuchasopenflames,radiators,heatregisters,stoves,orotherapparatus(in

cluding amplifiers) that produce heat. Do not place any open flame sources on the product.

DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third

prongareprovidedforyoursafety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultanelectricianforreplace

ment of the obsolete outlet.

PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

ONLY USE attachments/accessories specified by the manufacturer.

USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

UNPLUG this apparatus during lightning storms or when unused for long periods of time.

REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the

apparatus.

The MAINS plug or an appliance coupler shall remain readily operable.

The airborne noise of the Apparatus does not exceed 70dB (A).

ApparatuswithCLASSIconstructionshallbeconnectedtoaMAINSsocketoutletwithaprotectiveearthingconnec

tion.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

Operate this product within its specified operating temperature range.

Shure Incorporated

4/16

•

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

Thissymbolindicatesthatthereareimportantoperatingandmaintenanceinstructionsintheliteratureaccom

panying this unit.

WARNING

LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOL

UME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced

hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA)

on maximum time exposure to sound pressure levels before hearing damage occurs.

90 dB SPL

at 8 hours

95 dB SPL

at 4 hours

100 dB SPL

at 2 hours

105 dB SPL

at 1 hour

110 dB SPL

at ½ hour

115 dB SPL

at 15 minutes

120 dB SPL

Avoid or damage may occur

Information to the user

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the manufacturer's instruction manual, may cause interference with radio and television reception.

Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void

your authority to operate this equipment.

Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequip

mentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstruc

tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

inaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbede

termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

Notice: The Industry Canada regulations provide that changes or modifications not expressly approved by Shure Inc. could

void your authority to operate this equipment.

Shure Incorporated

5/16

•

General Description

Designed for easy portable use, the Shure MVX2U digital audio interface enables you to connect an XLR microphone directly

toyourcomputerforstreamingorsendingprofessionalqualityaudio.WhenusedwiththeMOTIVDesktopApp,presets,limit

ing,compressionandequalizationareallavailabletoprovideexceptionaldefinitionandclarity.ConsistentwithShure'scom

mitment to quality and durability, the MVX2U features an all-metal housing for reliable performance.

Features

Convenient Plug-and-Play Operation

Compatible with Windows and Mac computers.

Durable, Versatile Design

USB connector allows XLR microphones to be used for digital recording

Rugged, all-metal construction for outstanding reliability

Flexible Sound Control with the ShurePlus MOTIV Desktop Application

The MOTIV Desktop Application offers control over input settings and includes the following additional features:

Auto Level Mode Automatically adjusts microphone settings to take the guesswork out of gain and compression settings

Manual Mode Create and save custom presets

MVX2U Inputs and Outputs

USB-C port: Use the included USB-C cable to send and receive audio from your computer or recording device.

Phantom Power LED: LED indicates whether Phantom Power is on or off.

3.5mm monitor output: Connect to headphones or earphones for zero-latency direct monitoring.

XLR input: Connect your microphone directly to the MVX2U or with an XLR cable.

™

Shure Incorporated

6/16

•

LED Status

Green: USB connection is made.

Amber: USB connection has failed.

Amber Flashing: Firmware update is in progress.

Red: MVX2U has been muted.

Off: No connection.

Note: Upon first connection, LED is amber and turns green once the device is ready.

Quick Setup

Begin by connecting your audio equipment. Plug your microphone into the MVX2U XLR connector directly or with

an XLR cable.

Connect the MVX2U to your computer with the USB-C cable. TheMVX2ULEDwillglowamberwhentheconnec

tion is made and then turn green when the mic is ready to use.

Plug your headphones into the monitor output.

Open the MOTIV Desktop app or download the app at https://wwww.shure.com/MOTIVdesktop. Your computer

may request permission to use the external device the first time the app is opened.

Check audio levels and adjust microphone settings as needed. Manually adjust microphone gain or select Auto

Level Mode for worry free audio setup. See the "Advanced Mic Settings" topic for information on advanced features.

Note: The first time you connect the MVX2U, phantom power will be on. Be sure to turn phantom power off in the MOTIV

Desktop app if you are using a ribbon microphone. Phantom power can damage a sensitive ribbon microphone. You can find

the phantom power toggle in MOTIV Desktop app settings.

Shure Incorporated

7/16

Auto Level Mode

Use the following suggestions as a great starting point for your most common recording needs. Keep in mind that there are

many effective ways to mic a voice. The closer you can get to the microphone, the better, but Auto Level Mode really helps to

get you sounding your best. Experiment to find which mic placement works best for you.

Near

For podcast and voice recording applications. Position the microphone in front of and as close to your face as possible. Speak

directly into the mic, 1-6 inches (2.54 - 15 cm) away for a more intimate voice sound with maximum rejection of off-axis sounds.

Make additional gain adjustments if necessary.

Far

Ideal when the sound source is further from the microphone, like in gaming when the person needs to be closer to the screen

or gaming console. Aim the microphone directly at the sound source. Place the microphone 6 to 18 inches (15 to 45 cm) away

from the sound source. Make additional gain adjustments if necessary.

Tip: Ensure that the microphone is directly pointed towards the source. If possible, experiment with mic placement to find

where it sounds best. Make additional gain adjustments as necessary.

Shure Incorporated

8/16

Additional Tips

Shure offers educational articles and publications on recording techniques for a variety of instruments and applications. Visit

Shure Educational Articles for more information.

The Shure MOTIV Desktop App

Use the Shure MOTIV desktop app to quickly adjust microphone settings. The device stores the most recently used settings for

quick setup.

Mic Setup: Auto Level

①Settings Click the three dots to access MOTIV software information, manage presets, application preferences and check for

firmware updates.

②Mic Selection Tap the caret to select your microphone and view available features.

③Auto Level Mode / Manual Mode AUTO LEVEL mode allows the app to select best choices for your recording needs. Or

select MANUAL mode for full control over the microphone settings.

④Mic Position Select the distance, Near or Far, from the sound source to the microphone.

⑤Tone Adjust the tonal qualities of your audio by selecting Dark, Natural or Bright tone. Tone controls a variety of settings to

quickly dial in the sound that works best for your voice.

⑥Gain Select the Quieter, Normal or Louder gain level that works best.

Shure Incorporated

9/16

⑦Phantom Power Toggle on to provide 48V of power to microphones that require a power supply.

Note: The first time you connect the MVX2U, phantom power will be on. Be sure to turn phantom power off in the MOTIV Desktop app if you are using a ribbon

microphone. Phantom power can damage a sensitive ribbon microphone.

⑧Mic Mute Use the toggle to mute and unmute your microphone.

⑨Monitor Mix slider Move the slider to adjust the levels of mic and playback sound sources. See "Monitor Mix Blend" for

more information on monitoring.

Mic Setup: Manual

①Auto Level Mode / Manual Mode AUTO LEVEL mode allows the app to select best choices for your recording needs. Or

select MANUAL mode for full control over the microphone settings.

②Presets Use the preset that works best for your needs. Or use the drop-down to create your own custom presets to quickly

access your mic settings once it sounds the way you like.

③Phantom Power Toggle on to provide 48V of power to microphones that require a power supply.

Note: ThefirsttimeyouconnecttheMVX2U,phantompowerwillbeon.BesuretoturnphantompoweroffintheMOTIVDesktopappifyouwillbeusingarib

bon microphone. Phantom power can damage a sensitive ribbon microphone.

④Mic Mute / Mic Gain Use the toggle to mute and unmute your microphone. Use the slider to control microphone gain.

Note: Some programs can control microphone gain while in Manual mode.

⑤Monitor Mix slider Move the slider to adjust the levels of mic and playback sound sources. See "Monitor Mix Blend" for

more information on monitoring.

Shure Incorporated

10/16

•

⑥Equalizer Use the 5-band parametric equalizer to adjust the gain of independent frequency ranges, to precisely shape the

frequency response. Tap Reset to return to an unchanged equalization state.

⑦High Pass Filter, Limiter and Compressor settings Fine tune your audio with filtering, limiting and compressor controls.

See "Advanced Mic Settings" for more information.

Preset Modes

Four selectable modes optimize settings for gain, equalization, and compression. Try out the modes to find which sounds best

foryourroomandrecordingapplication.Presetmodescanaffectthestrengthoftheinputsignal,soadjustthemicrophonelev

el as needed after changing presets.

Mode Characteristics

Dynamic Mic - Speech Equalization that emphasizes clarity and fullness, and gentle compression.

Dynamic Mic - Singing Subtleequalizationtoaddrichnessandclarityforanaturalsoundwhencap

turing solo or group singing.

Condenser Mic - Speech Amoresensitivesignalthatemphasizesspokenclarityandfullnesswithgen

tle compression.

Condenser Mic - Singing

Transparent compression to smooth out volume spikes and bring out quiet

passages in sung performances. The equalizer setting emphasizes detail and

an overall natural sound.

Custom Presets

Create and save custom presets to quickly access frequently used mic settings.

Start with the preset mode that best suits your application needs.

Adjust advanced settings, like compression, for clarity and consistency.

Tap Save to rename and save your new custom preset. The original preset will remain available.

The new custom preset is added to your list.

To access saved presets:

Tap the caret (arrow) in the Preset row to view your list of available presets.

Tap custom preset and Apply Preset to instantly apply gain, equalization, and compression preferences.

Tip: You can save a custom preset at any point by tapping Save.

Monitor Mix Blend

Use the monitor mix slider to adjust how much of each source you can hear. For best results, start monitoring at the midpoint

and adjust.

Move the slider towards the microphone icon (Mic) to hear more of the audio going into the mic. Like when you're singing

over a recorded guitar track and want to clearly hear your voice.

Move the slider towards the device icon (Playback)tohearmoreofthetrackplayingback.Whenyou'rerecordingahar

mony to your original vocal track and want to clearly hear the original performance.

Inhaltsverzeichnis

Andere Shure Aufnahmegeräte Handbücher

Shure

Shure PSM 300 Bedienungsanleitung

Shure

Shure M625 Bedienungsanleitung

Shure

Shure MVI Bedienungsanleitung

Shure

Shure PSM 200 Kurzanleitung

Shure

Shure ANI4IN Series Bedienungsanleitung

Shure

Shure DT15P Bedienungsanleitung

Shure

Shure LEGENDARY PERFOMANCE MVi Bedienungsanleitung

Shure

Shure MVI Bedienungsanleitung

Shure

Shure ML140HE Bedienungsanleitung

Shure

Shure PSM 900 Bedienungsanleitung

Shure

Shure DFR11EQ Version 5 Bedienungsanleitung

Shure

Shure PSM 900 Bedienungsanleitung

Shure

Shure PSM700 Bedienungsanleitung

Shure

Shure PSM 600 Bedienungsanleitung

Shure

Shure M95ED Bedienungsanleitung

Shure

Shure AMS880 Bedienungsanleitung

Shure

Shure PSM 900 Programmierhandbuch

Shure

Shure DFR11EQ Version 5 Bedienungsanleitung

Shure

Shure ANIUSB-Matrix Bedienungsanleitung

Shure

Shure M78S Bedienungsanleitung

Shure

Shure PSM 300 Bedienungsanleitung

Shure

Shure MV88+ Bedienungsanleitung

Shure

Shure Microphone Level Tone Generator A15TG Bedienungsanleitung

Shure

Shure M75ECS Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch