Shure AD3 Bedienungsanleitung

AD3

Plug-On Transmitter

User guide for the AD3 Axient Digital plug-on transmitter.

Version: 2.1 (2020-H)

Shure Incorporated
2/23
Table of Contents
AD3   Plug-On Transmitter 3
WARNING 3
AD3 Axient Digital Plug-On Transmitter 3
Features 4
Included Components 4
Optional Accessories 4
AD3 Transmitter Overview 4
Setup 6
Setting the AA Battery Type 7
Shure Rechargeable Battery 7
Power Over USB 8
Important Tips for Care and Storage of Shure Recharge
able Batteries 8
AA Batteries and Transmitter Runtime 8
Transmitter Controls 9
Menu Overview 10
Menu Map 10
Tips for Editing Menu Parameters 10
Home Screen Display 10
Locking the Interface 11
IR Sync 11
Setting the Frequency Manually 12
Updating Firmware 12
Firmware Versioning 12
Updating the Transmitter 12
RF Mute 13
Safe Start 13
Input Overload 13
Tone Generator 14
Matching Audio Levels with Offset 14
Menu Item Descriptions 15
Radio Menu 15
Audio Menu 15
Utilities Menu 16
Specifications 17
Frequency Bands and Transmitter RF Power 19
LICENSING INFORMATION 21
Australia Warning for Wireless 21
Certifications 21
Information to the user 22
Contact Customer Support 23

Shure Incorporated

3/23

•

AD3

Plug-On Transmitter

WARNING

Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat

above 140°F (60°C), or incinerate.

Follow instructions from manufacturer

Only use Shure charger to recharge Shure rechargeable batteries

WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type.

Never put batteries in mouth. If swallowed, contact your physician or local poison control center

Do not short circuit; may cause burns or catch fire

Do not charge or use battery packs other than Shure rechargeable batteries

Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like

Do not immerse the battery in liquid such as water, beverages, or other fluids.

Do not attach or insert battery with polarity reversed.

Keep away from small children.

Do not use abnormal batteries.

Pack the battery securely for transport.

WARNING

If water or other foreign objects enter the inside of the device, fire or electric shock may result.

Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

CAUTION

Never disassemble or modify the device, as failures may result.

Do not subject to extreme force and do not pull on the cable or failures may result.

Keep the microphone dry and avoid exposure to extreme temperatures and humidity.

Note: Use only with the included power supply or a Shure-approved equivalent.

AD3 Axient Digital Plug-On Transmitter

The Shure AD3 plug-on transmitter transforms any microphone into an advanced, portable Axient Digital AD Series wireless

microphone, delivering impeccable audio quality and RF performance, wide-tuning, and encryption features. Compatible with

Axient Digital AD4D and AD4Q receivers in Standard or High Density modes, AD3 features a custom, fast, and secure XLR

connector design, support for both conventional AA and Shure SB900-series rechargeable battery options, and simple, user-

friendly controls and menus. The AD3 is housed in a lightweight, rugged, metal chassis and is designed to resist sweat, mois

ture, and debris.

Shure Incorporated

4/23

•

◦

•

Features

Performance

20 Hz to 20 kHz range with flat frequency response

Automatic input staging optimizes gain setting

AES 256-bit encryption-enabled for secure transmission

>120 dB dynamic range

100 meter (300 feet) line-of-sight operating range

Selectable modulation modes optimize performance for spectral efficiency

Standard – optimal coverage, low latency

High density – dramatic increase in max system channel count

Built-in tone generator and RF markers to facilitate walk-testing

Switchable Power Levels = 2/10/35 mW (region dependent)

Design

Locking XLR connector

OLED display with easy-to-navigate menu and controls

Rugged metal construction

Menu and power lockout

Power

Over 8 hours continuous use with Shure rechargeable battery

Shure lithium-ion rechargeable battery provides extended battery life, precision metering, and zero memory effect

External power and charging over USB-C

Included Components

AA alkaline batteries (2) 80B8201

USB-A to USB-C cable 95A39299

Zipper bag 95D2313

Pouch with belt clip 95A44910

Optional Accessories

SB900B rechargeable lithium-ion battery SB900B

AD3 Transmitter Overview

①Display

Shure Incorporated

5/23

◦

View menu screens and settings. Press any control button to activate the backlight.

②Infrared (IR) port

Align with the receiver IR port during an IR Sync for automated transmitter tuning and setup.

③Control buttons

Use to navigate through parameter menus and to change settings.

④Power switch

Hold the X button to power the unit on or off.

⑤Enter button

Press to enter menu screens and confirm menu changes.

⑥Power LED

Green = Unit is powered on

Red = Low battery, or battery error

⑦Audio LED

Red, yellow, and green LEDs indicate average and peak audio levels.

The LED will turn red when the limiter is engaged.

⑧USB-C port

Supplies power or charges Shure rechargeable battery. LED indicates charging status when connected to a power supply.

Red = Charging

Green = Full charge

Yellow = Not charging

⑨Battery compartment

Requires two AA batteries or Shure rechargeable battery.

⑩AA battery adapter

Use to secure AA batteries. Remove when using a Shure rechargeable battery.

⑪XLR connector

Connection point for wired microphones, cables, and boom poles, among other things.

⑫Locking ring

To release the XLR connector, turn the ring counterclockwise and push in.

⑬Pouch

Provides additional grip and protection for the transmitter.

⑭Belt clip

Shure Incorporated

6/23

◦

Holds transmitter and microphone securely for hands-free carrying.

Setup

Slide the tab on the side of the transmitter to open the battery door.

Install the batteries.

AA batteries: Place batteries (note polarity markings) and AA adapter as shown below and close the door.

Shure rechargeable battery: Place battery as shown below (note polarity markings). Remove the AA adapter and

close the door to secure the battery.

Shure Incorporated

7/23

◦

•

Note: If using AA batteries, set the battery type to ensure the transmitter's battery status indicator is accurate.

Press and hold X to turn on the transmitter.

Select the appropriate input pad or boost to avoid overloading the audio input our add boost to low-output sources: Au

dio > Pad

12 dB: Use with high output sources, such as line levels and point-to-point applications.

Off (default): Use with typical microphones.

+12 dB: Use with low output sources.

Plug the transmitter into an XLR microphone or the output of an audio device.

Note: If you remove or replace the batteries without turning the transmitter off, the device will turn on again when the batteries are replaced.

Setting the AA Battery Type

To ensure accurate display of transmitter runtime, set the battery type to match the battery you have installed.

Note: If a Shure rechargeable battery is installed, selecting a battery type is not necessary and the battery type will display Shure.

Navigate to Utilities and select Battery.

Use the ▼▲ buttons to select the installed battery type:

Alkaline = Alkaline

NiMH = Nickel Metal Hydride

Lithium = Lithium Primary

Press O to save.

Shure Rechargeable Battery

Shure SB900series lithiumion batteries offer a rechargeable option for powering the transmitters. Batteries charge to 50% ca

pacity in 1 hour and reach full charge within 3 hours.

Single chargers and multiple bay chargers are available to recharge the Shure batteries.

Caution: Only charge Shure rechargeable batteries with a Shure battery charger.

Shure SB900B Runtime

2 mW 10 mW 35 mW

8+ hours 8+ hours 5+ hours

Note: Phantom power, RF output and the impedance of the connecting device can impact battery life.

Checking Battery Info

When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes

remaining.

Detailed information for the battery is displayed Battery menu of the transmitter: Utilities > Battery

Battery: The chemistry type of for the installed battery (Shure, Alkaline, Lithium, NiMH)

Shure Incorporated

8/23

•

Battery Time to Full (only appears when Shure rechargeable battery is being externally charged): Time remaining until bat

tery is fully charged

Battery Life: Indicates remaining battery runtime

Charge: Percentage of charge capacity

Health: Percentage of current battery health

Cycle Count: Total of the number of charging cycles for the installed battery

Temperature: Battery temperature reported in Celsius and Fahrenheit

Power Over USB

When operated with AA batteries, or without batteries, the AD3 transmitter can be powered by connecting the USB-C port on

the bottom of the transmitter to a suitable power source.

When a Shure rechargeable battery is inserted, the USB connection can power the transmitter while simultaneously charging

the battery.

Important Tips for Care and Storage of Shure Rechargeable Batteries

Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.

Always store batteries and transmitters at room temperature

Ideally, batteries should be charged to approximately 40% of capacity for long-term storage

Periodically clean the battery contacts with alcohol to maintain ideal contact

During storage, check batteries every 6 months and recharge to 40% of capacity as needed

For additional rechargeable battery information, visit www.shure.com.

AA Batteries and Transmitter Runtime

Transmitters are compatible with the following AA battery types:

Alkaline

Nickel Metal Hydride (NiMH)

Lithium Primary

A 5segment battery indicator representing the charge level of the transmitter battery is displayed on the screens of the trans

mitter and receiver. The following table contains the approximate remaining transmitter runtime in hours:minutes.

Shure Incorporated

9/23

Alkaline Batteries

Battery Indicator

Battery Runtime ( hours:minutes)

UHF 1.x

2 mW/10

2 mW

/10

8:00 to 6:00

3:30

3:00

5:30 to

4:15

3:45

3:00

6:00 to 4:00

3:00

2:00

4:15 to

3:00

2:15

4:00 to 1:45

2:00

1:30

3:00 to

1:45

2:15

2:00

<1:45 <1:30 <1:45 <2:00

<0:45 <0:45 <0:45 <0:45

<0:15 <0:15 <0:15 <0:15

Transmitter Controls

Use the controls to navigate menus and update settings.

XHold button to turn transmitter power on and off. Acts as a 'back' button to return to previous menus or pa

rameters without confirming a value change.

OEnters menu screens and confirms parameter changes

∨∧ Use to scroll through menu screens and to change parameter values

Shure Incorporated

10/23

•

Tip: Hold the ∧button while powering on to enter safe start mode.

Menu Overview

Menu Map

Tips for Editing Menu Parameters

To access the menu options from the home screen, press O. Use the arrow buttons to see additional menus and parame

ters.

A menu parameter will blink when editing is enabled

To increase, decrease, or change a parameter, use the arrow buttons

To save a menu change, press O

To exit a menu without saving a change, press X

Home Screen Display

The home screen shows transmitter information and status.

There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of

the following choices:

Name

Frequency Setting

Group (G) and Channel (C)

Device ID

The following icons indicate transmitter settings:

Andere Handbücher für AD3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shure Sender Handbücher

Shure

Shure T1 Bedienungsanleitung

Shure

Shure ULXD6-8 Bedienungsanleitung

Shure

Shure UC2 Bedienungsanleitung

Shure

Shure AD2/B87A Bedienungsanleitung

Shure

Shure Axient Digital ADX1 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure W10BT Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure AD3 Bedienungsanleitung

Shure

Shure AXT200 Bedienungsanleitung

Shure

Shure ULXD6 Bedienungsanleitung

Shure

Shure ULXD6 Bedienungsanleitung

Shure

Shure MX692 Bedienungsanleitung

Shure

Shure AD2 Bedienungsanleitung

Shure

Shure AXIENT DIGITAL ADX2FD Bedienungsanleitung

Shure

Shure ULXD6 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure U1 Bedienungsanleitung

Shure

Shure AD2 Bedienungsanleitung

Shure

Shure Axient Bedienungsanleitung

Shure

Shure U2 Bedienungsanleitung

Shure

Shure UR3 Bedienungsanleitung

Shure

Shure DT 6008 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung