Shure ADX2FD/K8 Bedienungsanleitung

ADX2FD

Handheld Transmitter

User guide for the Shure ADX2FD Frequency Diversity handheld transmitter

Version: 11.0 (2020-K)

Shure Incorporated
2/23
Table of Contents
ADX2FD   Handheld Transmitter 3
WARNING 3
ADX2FD Handheld Transmitter 3
Features 3
Performance 3
Design 4
Power 4
Included Components 4
Choice of (1) of the following Shure microphone car
tridges: 4
Optional Accessories 4
Optional Shure microphone cartridges: 5
ADX2FD Transmitter Overview 5
Transmitter Controls 6
Home Screen Display 7
Locking the Interface 7
Shure Rechargeable Batteries 7
Checking Battery Info 8
Important Tips for Care and Storage of Shure Recharge
able Batteries 8
Battery Installation 9
ADX2FD SB920 Battery Runtime 9
Installing the Battery Contact Cover 9
Menu Parameters 9
Tips for Editing Menu Parameters 10
Menu Map 10
Menu Parameter Descriptions 10
Radio Menu 10
Audio Menu 11
Utilities Menu 11
IR Sync 12
Setting the Frequency Manually 13
RF Mute 13
Safe Start 14
Operating in Frequency Diversity Mode 14
Turning Off Frequency 2 (Freq 2) 15
Input Overload 15
Tone Generator 15
Matching Audio Levels with Mic Offset 15
ShowLink Test 16
Updating Firmware 16
Firmware Versioning 16
Updating the Transmitter 17
Specifications 17
Frequency Range and Transmitter Output Power 18
Australia Warning for Wireless 21
LICENSING INFORMATION 21
Certifications 21
Information to the user 22
Contact Customer Support 23

Shure Incorporated

3/23

•

ADX2FD

Handheld Transmitter

WARNING

Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat

above 140°F (60°C), or incinerate.

Follow instructions from manufacturer

Only use Shure charger to recharge Shure rechargeable batteries

WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type.

Never put batteries in mouth. If swallowed, contact your physician or local poison control center

Do not short circuit; may cause burns or catch fire

Do not charge or use battery packs other than Shure rechargeable batteries

Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like

Do not immerse the battery in liquid such as water, beverages, or other fluids.

Do not attach or insert battery with polarity reversed.

Keep away from small children.

Do not use abnormal batteries.

Pack the battery securely for transport.

Note: Use only with the included power supply or a Shure-approved equivalent.

ADX2FD Handheld Transmitter

ADX series transmitters deliver impeccable audio quality and RF performance, and are equipped with ShowLink remote con

trol for real-time parameter adjustments and interference avoidance. This transmitter additionally features Frequency Diversity

for seamless audio in even the most challenging environments. Lightweight aluminum construction, SB920 rechargeable pow

er options (with dockable charging).

Features

Performance

184 MHz tuning range

Frequency Diversity enables simultaneous transmission on two independent frequencies to ensure seamless, uninterrupt

ed audio for mission-critical applications. Single carrier mode is available if Frequency Diversity is not required.

20 Hz to 20 kHz range with flat frequency response

Automatic input staging optimizes gain setting

Diversity ShowLink-enabled for remote transmitter control and automatic interference avoidance

AES 256-bit encryption-enabled for secure transmission

>120 dB, A-weighted, System Gain @ +10

Digital output: >125dB, A-weighted (Dante, AES3, AES67)

Shure Incorporated

4/23

•

◦

•

◦

•

◦

100 meter (300 feet) line-of-sight operating range

Selectable modulation modes optimize performance for spectral efficiency or audio quality:

Standard – optimal coverage, low latency

High density – dramatic increase in max system channel count

Switchable Power Levels (region dependent):

2/10/50 mW (single carrier mode)

2 x 20 mW (Frequency Diversity mode)

Built-in tone generator and RF markers to facilitate range-testing

Design

Interchangeable Shure microphone cartridges

Backlit LCD with easy to navigate menu and controls

Rugged metal construction

Menu and power lockout

Power

Shure SB920 rechargeable batteries offer precision metering and zero memory effect

External charging contacts for docked charging

Battery Runtime with Shure SB920:

Up to 9 hours in single carrier mode @ 10 mW

Up to 6.5 hours in Frequency Diversity mode @ 10 mW x 10 mW

Up to 5 hours in single carrier, high-power mode @ 50 mW

Included Components

SB920 Shure Rechargeable Battery 95A25763

Zipper Bag 95B2313

Threaded Adapter 31B1856

Swivel Adapter, black 90F4046

Choice of (1) of the following Shure microphone cartridges:

SM58 (RPW112) KSM9 Nickel (RPW188)

BETA 87C (RPW122) BETA 87A (RPW120)

BETA 58A (RPW 118) KSM9 Black (RPW184)

KSM8 Black (RPW174) KSM8 Nickel (RPW170)

KSM9HS Black (RPW186) KSM9HS Nickel (RPW190)

Shure Incorporated

5/23

Optional Accessories

SB920 Shure Rechargeable Battery 95A25763

Battery Contact Cover (part number varies by frequency range) WA619-A (470-636 MHz), WA619-B

(606-810 MHz), WA619-C (750-960 MHz)

AD651B Talk Switch Button (black) 90A37347B

Microphone stand adapter WA371

Shure Networked Docking Charger 2-Up SBC240

Optional Shure microphone cartridges:

SM58 (RPW112)

SM86 (RPW114)

SM87A (RPW116)

BETA 58A (RPW118)

BETA 87A (RPW120)

BETA 87C (RPW122)

VP68 (RPW124)

KSM9 Nickel (RPW188)

KSM9HS Nickel (RPW190)

KSM9 Black (RPW184)

KSM9HS Black (RPW186)

ADX2FD Transmitter Overview

①Microphone Cartridge

See Optional Accessories for a list of compatible cartridges.

②Display

View menu screens and settings. Press any control button to activate the backlight.

③Infrared (IR) Port

Align with the receiver IR port during an IR Sync for automated transmitter programming.

④Control Buttons

Use to navigate through parameter menus and change values.

⑤Battery Compartment

Requires Shure rechargeable battery.

⑥On/Off Switch

Powers the unit on or off.

Shure Incorporated

6/23

•

⑦Handle

Unscrew to access controls and batteries.

⑧Battery Charging Contacts

Charging contacts for use with docking battery chargers.

Transmitter Controls

Use to navigate through parameter menus and change values.

XActs as a 'back' button to return to previous menus or parameters without confirming a value change

OEnters menu screens and confirms parameter changes

∨∧ Use to scroll through menu screens and to change parameter values

Tip: Use the following shortcuts for quick setup:

Hold the ∧button while powering on to lock or unlock the transmitter controls.

Hold the X button while powering on to enter the Safe Start menu.

Shure Incorporated

7/23

◦

Home Screen Display

The home screen shows transmitter information and status.

There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of

the following choices:

Name

F1 and F2 Frequency Settings

F1 and F2 Group (G) and Channel (C)

Device ID

The following icons indicate transmitter settings:

Battery runtime in hours and minutes or bar display

Key: Displayed when encryption is enabled

Displayed when controls are locked. Icon will flash if access

is attempted to a locked control (power or menu).

ShowLink signal strength displays 0 to 5 bars

STD: Standard Transmission Mode

HD: High Density Transmission Mode

RF Mute Engaged: Displayed when RF output is muted

Locking the Interface

Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the

home screen when the interface lock is enabled.

From the Utilities menu, navigate to Locks and select one of the following lock options:

None: The controls are unlocked

Power: The power switch is locked

Menu: The menu parameters are locked

All: The power switch and menu parameters are locked

Press O to save.

To quickly unlock a transmitter: Press O twice, select None, and press O.

Shure Incorporated

8/23

•

Shure Rechargeable Batteries

Shure lithium-ion batteries offer a rechargeable option for powering the transmitters. Batteries quickly charge to 50% capacity

in one hour and reach full charge within three hours.

Single chargers and multiple bay chargers are available to recharge the Shure batteries.

Caution: Only charge Shure rechargeable batteries with a Shure battery charger.

Checking Battery Info

When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes

remaining.

Detailed information for the battery is displayed Battery menu of the transmitter: Utilities > Battery

Battery: The chemistry type of for the installed battery (Shure, Alkaline, Lithium, NiMH)

Bars: Indicates the number of bars displayed

Time: Battery runtime

Charge: Percentage of charge capacity

Health: Percentage of current battery health

Cycle Count: Total of the number of charging cycles for the installed battery

Temperature: Battery temperature reported in Celsius and Fahrenheit

Important Tips for Care and Storage of Shure Rechargeable Batteries

Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.

Always store batteries and transmitters at room temperature

Ideally, batteries should be charged to approximately 40% of capacity for long-term storage

Periodically clean the battery contacts with alcohol to maintain ideal contact

During storage, check batteries every 6 months and recharge to 40% of capacity as needed

For additional rechargeable battery information, visit www.shure.com.

Shure Incorporated

9/23

Battery Installation

①Accessing the Battery Compartment

Unscrew and remove the handle as shown.

②Inserting the Battery

Insert the battery, contracts first into the battery compartment. Press down on the tab to fully seat the battery, and then rein

stall the handle.

Tip: To remove the battery, pull up on the tab on the bottom of the battery.

ADX2FD SB920 Battery Runtime

Note: Higher RF power levels decrease battery runtime. Battery runtime varies with battery age and environmental conditions.

Signal Carrier Mode Frequency Diversity Mode

2 mW 10 mW 50 mW 2 mW x 2 mW 10 mW x 10 mW 20 mW x 20 mW

8.5 to 10.5 hours 7.5 to 9.5 hours 5.0 to 7.0 hours 5.5 to 7.5 hours 5.0 to 7.0 hours 4.5 to 6.5 hours

Installing the Battery Contact Cover

Use battery contact covers to prevent reflections from the battery contacts during broadcasts or live performances.

Shure Incorporated

10/23

•

Menu Parameters

The Main menu organizes the available transmitter parameters into three categories:

Radio

Audio

Utilities

Tips for Editing Menu Parameters

To access the menu options from the home screen, press O . Use the arrow buttons to access additional menus and para

meters.

A menu parameter will blink when editing is enabled

To increase, decrease or change a parameter, use the arrow buttons

To save a menu change, press O

To exit a menu without saving a change, press X

Menu Map

Menu Parameter Descriptions

Radio Menu

F1 Freq

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shure Sender Handbücher

Shure

Shure ADX Series Bedienungsanleitung

Shure

Shure ADX2 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure AXIENT AXT100 Bedienungsanleitung

Shure

Shure ADX1-G56 Bedienungsanleitung

Shure

Shure UR1M Bedienungsanleitung

Shure

Shure ADX1M Bedienungsanleitung

Shure

Shure UC2 Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure U1 Bedienungsanleitung

Shure

Shure Axient Bedienungsanleitung

Shure

Shure AD2/B87A Bedienungsanleitung

Shure

Shure T2 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure UC1L Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure Axient Digital ADX1 Bedienungsanleitung

Shure

Shure AXIENT AXT100 Bedienungsanleitung

Shure

Shure T1 Bedienungsanleitung

Shure

Shure AD1 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Shure

Shure Axient Digital ADX1 Bedienungsanleitung

Shure

Shure P4T Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung