Shuttle AV11 Bedienungsanleitung
AV11
PPGA Celeron processor
Based AGPMAIN BOARD
User's Manual
M318
ShuttleAV11
PPGA Celeron processor based AGPset Mainboard
Manual Version 1.0
Copyright
Copyright©1999byShuttleInc. AllRightsReserved.
Nopartofthispublicationmaybereproduced,transcribed,storedina retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical,magnetic,optical, chemical,photocopying, manual,orotherwise, without
priorwritten permission fromShuttle Inc.
Disclaimer
Shuttle Inc. shall not be liable for any incidental or consequential damages resulting from the
performanceor use ofthis product.
Thiscompany makesno representationsor warrantiesregarding the contentsof thismanual.
Informationin thismanual hasbeen carefullychecked for reliability;however, noguarantee
is given as to the correctness of the contents. In the interest of continued product improve-
ment, this company reserves the right to revise the manual or include changes in the specifi-
cations of the product described within it at any time without notice and without obligation to
notify any persion of such revision or changes. The information contained in this manual is
providedforgeneral useby thecustomers.
Trademarks
SpacewalkerisaregisteredtrademarkofShuttleInc.
Intel,Pentiumisaregistered trademarks ofIntel Corporation.
VIAis a registered trademarks of VIA Corporation.
PC/ATis a registered trademarkof International Business Machines (IBM)Corporation.
PS/2is aregistered trademarkof IBM Corporation.
AWARDis a registered trademark of Award Software Inc.
Microsoftand Windows are registeredtrademarks of Microsoft Corporation.
General Notice:Other brand and product names used herein arefor identification
purposesonly and may be trademarks oftheir respective owners.
- 1 -
WHAT’SINTHEMANUAL ................................................................4
QuickReference.................................................................................................4
About This Manual..............................................................................................4
Technical Support..............................................................................................4
1INTRODUCTION ............................................................................5
1.1 TO DIFFERENT USERS................................................................................5
FIRST-TIME DIY SYSTEM BUILDER.......................................................5
EXPERIENCED DIY USER.......................................................................5
SYSTEMINTEGRATOR ...........................................................................5
1.2 ITEM CHECKLIST.........................................................................................6
2FEATURES....................................................................................7
2.1 SPECIFICATIONS.........................................................................................7
3HARDWAREINSTALLATION.......................................................10
3.1 STEP BY STEP INSTALLATION................................................................10
Accessories Of AV11...............................................................................10
STEP 1 Install the CPU ...........................................................................11
STEP 2 Set Jumpers ...............................................................................12
STEP 3 Install SDRAM System Memory.................................................12
STEP 4 Install Internal Peripherals in System Case ...............................13
STEP 5 Mount the Mainboard on the Computer Chassis .......................14
STEP 6 Connect Front Panel Switches/LEDs/Speaker ..........................15
STEP 7 Connect IDE & Floppy Disk Drives ............................................17
STEP 8 Connect Other Internal Peripherals ...........................................17
STEP 9 Connect the Power Supply.........................................................18
STEP 10 Install Add-on Cards in Expansion Slots..................................18
TABLEOFCONTENTS
- 2 -
STEP 11 Connect External Peripherals to Back Panel...........................19
STEP 12 First Time System Boot Up ......................................................20
STEP 13 Install Drivers & Software Components...................................21
3.2 JUMPER SETTINGS...................................................................................22
Jumpers & Connectors Guide .................................................................23
Set Keyboard & PS/2 Mouse Power-On (JP3)........................................25
CPU Host Frequency Setting (JP8)........................................................26
CPU Clock Ratio Setting (JP9)................................................................27
Clear CMOS (JP12).................................................................................28
PS/2 Keyboard & PS/2 Mouse Connectors.............................................28
USB1 / USB2 Port Connectors................................................................29
COM1 / COM2 Connector .......................................................................29
Parallel Port Connector............................................................................29
ATX Power On/Off Switch Connector (PON) ..........................................29
Green LED Connector (GLED)................................................................30
EPMI Connector (EPMI) ..........................................................................30
HDD LED Connector (HDLED)................................................................30
PWR LED Connector (PWLED) ..............................................................30
Hardware Reset Connector (RST) ..........................................................31
Speaker Connector (SPK) .......................................................................31
Enhanced IDE Ports and Floppy Connectors .........................................31
ATX Power Supply Connector (J5)..........................................................32
Cooling Fan Connectors for CPU (JP1),
Chassis (JP2), (J9) & (J12)......................................................................32
IR Connector (J4) ....................................................................................33
Wake-on LAN Connector (J16) ...............................................................33
SB-Link Connector (JP10).......................................................................34
- 3 -
3.3 SYSTEM MEMORY CONFIGURATION......................................................35
Install Memory..........................................................................................35
Upgrade Memory .....................................................................................35
4SOFTWAREUTILITY ...................................................................36
4.1 AV11 MAINBOARD CD OVERVIEW.........................................................36
4.2 INSTALL MAINBOARD DRIVER...............................................................37
4.3 TO VIEW THE USER'S MANUAL..............................................................38
5 BIOS SETUP ...............................................................................39
5.1 ENTERING BIOS.........................................................................................39
5.2 THE MAIN MENU.........................................................................................40
Standard CMOS Setup............................................................................42
BIOS Features Setup...............................................................................44
Chipset Features Setup...........................................................................48
Power Management Setup......................................................................52
PnP / PCI Configuration ..........................................................................56
Load BIOS Defaults.................................................................................59
Load SETUP Defaults..............................................................................59
Integrated Peripherals .............................................................................60
User Password Setting ............................................................................64
Save & Exit Setup....................................................................................65
Exit Without Saving..................................................................................65
- 4 -
Quick Reference
HardwareInstallation >> Step-by-Step.................................................Page 10
Jumper Settings >> A Closer Look.......................................................Page 22
Software Utility >> How to Install..........................................................Page 36
BIOS Setup >> How to Configure.........................................................Page 39
About This Manual
For First-Time DIY System Builder.........................................................Page 5
ForExperienced DIY User.......................................................................Page 5
For System Integrator..............................................................................Page 5
TechnicalSupport
Contact Your Dealer
Shuttle’s (RMA or Warranty) Policy
WHAT’SINTHEMANUAL
- 5 -
1INTRODUCTION
1.1To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as
difficult as you may think. To make your first computer DIY experience a
success, right from the start, we have designed the 3 Hardware Installation
section in a step-by-step fashion for all the first-time DIY system builders.
Prior to installation, we also suggest you to read the whole manual carefully
to gain a complete understanding of your new AV11 mainboard.
Experienced DIY User
Congratulations on your purchase of the Shuttle AV11 mainboard. You will
findthatinstallingyournewShuttle AV11 mainboard is justthateasy. Bundled
with an array of onboard functions, the highly-integrated AV11 mainboard
provides you with a total solution to build the most stable and reliable system.
Refer to section 3.2 Jumper Settings and Chapter 4 Software Utility to find
out how to get the best out of your new mainboard. Chapter 5 BIOS Setup
also contains relevant information on how to tune up your system to achieve
higher performance.
System Integrator
You have wisely chosen Shuttle AV11 to construct your system. Shuttle
AV11 incorporates all the state-of-the-art technology of the VT82C693A
chipset from VIA. It integrates the most advanced functions you can find to
date in a compact ATX board. Refer to section 3.2 Jumper Settings and
Chapter 4 Software Utility for an in-depth view of system construction.
- 6 -
1.2Item Checklist
Check all items you received with your AV11 mainboard to make sure
nothing is missing. The complete package should include:
One Shuttle AV11 Mainboard
(with onboard Socket 370, built-in VIA693A
chipset, ATX form factor, including 2xUSB,
2xSerial, and 1xParallel ports, plus 1xPS/2
Keyboard, and 1xPS/2 Mouse connectors.)
One ATA/66 Ribbon Cable
One Floppy Ribbon Cable
This AV11 User’s Manual
One CD-ROM containing:
The AV11 user’s manual on PDF format
The VIA 4 IN 1 Drivers
The Award Flashing Utility
- 7 -
The AV11 mainboard is carefully designed for the demanding PC user who wants
high performance and maximum intelligent features in a compact package.
2.1Specifications
CPU Support
Support Intel PPGA Celeron 300 ~ 500+ MHz
Chipset
Features VIA VT82C693A AGPset with I/O subsystems.
Jumperless CPU Configuration
Auto-detect CPU voltage
Soft-configure CPU Speed (The CPU operating speed is software
configurable in the CMOS Setup menu of the BIOS Setup utility.)
Versatile Memory Support
Equipped with three DIMM banks of PC66/100/133 compliant SDRAM to
provide up to 768MB of system memory.
Configurable support for EC (Error Checking) and ECC (Error Checking
and Correcting)
AGP Slot
Supports Accelerated Graphics Port cards for high-performance, compo-
nent level interconnect directed at 3D graphical display applications.
PCI and ISA Expansion Slots
Provides five 32-bit PCI slots and two 16-bit ISA slots.
LPC Super I/O Onboard
Provides a variety of I/O interfaces:
1 × Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, 2.88MB
format or for 5.25-inch FDD with 360KB or 1.2MB format.
1 × PS/2 mouse connector
1 × PS/2 Keyboard connector
2FEATURES
- 8 -
2 × USB connectors
2 × DB9 Serial connectors 16550 UART compatible
1 × Infrared communications port ASKIR and HPSIR compatible.
(Serial port COM2 can also be redirected to an external IrDA Adapter
for wireless connection.)
1 × DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
PCI Bus Master IDE Controller Onboard
Two UltraDMA 33/66 Bus Master Dual-channel IDE ports provide support to
a maximum of four IDE devices (one Master and one Slave per channel). The
IDE Bus implements data transfer speeds of up to 33/66 MB/sec and also
supports Enhanced PIO Modes 3 & 4.
ATX Power Supply Connector
ATX power supply unit can connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
Advanced Configuration and Power Interface
Features four power savings modes: Snoop, Suspend to RAM, Suspend to
Disk, and Soft-Off. ACPI provides more efficient Energy Savings Features
controlled by your operating system that supports OS Direct Power Manage-
ment (OSPM) functionality.
System BIOS
Provides licensed Award V4.51PG BIOS on 2MB Flash EEPROM.
Supports Green PC and Desktop Management Interface (DMI).
ATX Form Factor
System board conforms to the ATX specification.
Board dimensions: 305mm × 180mm
Inhaltsverzeichnis
Andere Shuttle Hauptplatine Handbücher
Shuttle
Shuttle AV14 Bedienungsanleitung
Shuttle
Shuttle FS51 Bedienungsanleitung
Shuttle
Shuttle HOT-673 Bedienungsanleitung
Shuttle
Shuttle HOT-603 Bedienungsanleitung
Shuttle
Shuttle Spacewalker AK11 Bedienungsanleitung
Shuttle
Shuttle HOT-683 Bedienungsanleitung
Shuttle
Shuttle FB77 Bedienungsanleitung
Shuttle
Shuttle HOT-681 Bedienungsanleitung
Shuttle
Shuttle AB48 Bedienungsanleitung
Shuttle
Shuttle Spacewalker AV40 Bedienungsanleitung
Shuttle
Shuttle FT20 Bedienungsanleitung
Shuttle
Shuttle Spacewalker HOT-685Z Bedienungsanleitung
Shuttle
Shuttle FS56 Bedienungsanleitung
Shuttle
Shuttle Spacewalker AB30 Bedienungsanleitung
Shuttle
Shuttle MK35V Bedienungsanleitung
Shuttle
Shuttle MV43VN Bedienungsanleitung
Shuttle
Shuttle AN51R Bedienungsanleitung
Shuttle
Shuttle AB52 Bedienungsanleitung
Shuttle
Shuttle AE23 Bedienungsanleitung
Shuttle
Shuttle AK12 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
