Shuttle FT20 Bedienungsanleitung
FT20
Socket939
AMDTM Athlon64Processor
BasedDDRMainBoard
User's Manual
Shuttle®FT20
Socket 939
AMD AthlonTM 64 Processor
Based DDR Mainboard
Copyright
Copyright©2005 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
AMD AthlonTM 64 is registered trademarks of AMD Corporation.
nVIDIAisaregisteredtrademarkofnVIDIACorporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification purposes
only and may be trademarks of their respective owners.
9M0-A04FT0-2000
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548Class B, EN55024(1998/AS/NZS), EN4252.1 (1994),EN61000, ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ&AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
Model Name: FT20
S/N: N/A
CPU:
External Frequency: 200 MHz
AMD AthlonTM 64 : 2800+, 3200+, 3400+, 3800+, 4000+
VGA Port: one port with 15 pins
DVI Port: one port
1394 Port: one port with 6 pins respectively
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
LAN Port: one port with 8 pins (10Mbps/100Mbps/1000Mbps)
USB 2.0 Port: two ports with 4 pins respectively
Mic-In & Earphone Ports: one port for each
Side-SURR Port: one port
Line-In Port: one port
Center/Bass-Out Port: one port
Surround-Back Port: one port
Front-Out Port: one port
Clear CMOS button: one port
DIMMMemory(optional):DDR400 256 MB *2
Power Cable: Detachable and Shielded (with a GND pin)
Monitor: CRT (D-Sub) + LCD (DVI Mode)
Maximum Resolution: 1280 X 1024 V:60Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode External Frequency CPU CPU Open/Close
1200MHz AMD AthlonTM 64 4000+ Close
2200MHz AMD AthlonTM 64 4000+ Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal:32.768KHz(X8)/ 25MHz(X7)/22.5MHz(X9)/24.576MHz(X10)/24.576MHz(X6)
(D) Supported Host Peripherals:
Host Peripheral Product Name Model Name
# 1 Case FT20
# 2 PowerSupply PC35I2402
# 3 Serial ATA Seagate ST3120026AS
# 4 BTC DVD DUAL DRW 1008UI
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI or AGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Important Safety Information
SAFETY INSTRUCTIONS
1. Pleaseread these safetyinstructionscarefully.
2. PleasekeepthisUser‘sManualforlaterreference.
3. Pleasedisconnect this equipmentfromACoutlet before cleaning.Don‘tuseliquid
orsprayeddetergentforcleaning.
4. Forpluggableequipment,the socket-outlet shall be installed near the equipment
andshall be easilyaccessible.
5. Pleasekeepthisequipmentfromhumidity.
6. Laythis equipment on a reliable surface when install.Adroporfallcouldcause injury.
7. Donotleavethisequipment inan environmentunconditioned, itmay damagethe
equipment.
8. Theopenings on the enclosureare for air convectionhence Protect the equipment
fromoverheating.DONOT COVER THE OPENINGS.
9. Makesure the voltageofthepower source whenconnecttheequipment to the
poweroutlet.
10. Placethe powercordsuch awaythat peoplecannot steponit. Donotplaceanything
overthe power cord.Thepowercord must beratedforthe product andforthevoltage
andcurrent marked on the product’s electrical ratings label. The voltage and current
ratingofthecordshouldbegreaterthan thevoltage andcurrentratingmarkedonthe
product.
11. Allcautionsandwarningsontheequipmentshouldbenoted.
12. Iftheequipmentisnotuseforlongtime,disconnecttheequipmentfrommainstoavoid
beingdamaged by transientover-voltage.
13. Neverpouranyliquidintoventilationopenings,thiscouldcausefireorelectricalshock.
14. CAUTION:Thecomputeris provided with a battery-powered real-time clock circuit.
Thereisa danger of explosion ifbatteryis incorrectly replaced.
Replaceonlywithsame orequivalenttyperecommendedby themanufacture.
Discardused batteries accordingtothemanufacturer’s instructions.
15. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITH APPROPRI-
ATE SAFETY STANDARDS INCLUDING IEC 60825.
CAUTION :RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
CLASS 1 LASER PRODUCT
- 1 -
1 INTRODUCTION.................................................................................. 5
1.1 TO DIFFERENT USERS ............................................................................. 5
FIRST-TIMEDIY SYSTEM BUILDER............................................................ 5
EXPERIENCED DIY USER ........................................................................ 5
SYSTEMINTEGRATOR............................................................................... 5
1.2 ITEM CHECKLIST....................................................................................... 6
2 FEATURES .......................................................................................... 7
2.1 SPECIFICATIONS ....................................................................................... 7
3 HARDWARE INSTALLATION ........................................................... 10
3.1 STEP BY STEP INSTALLATION............................................................... 10
Accessories of FT20 ............................................................................ 10
STEP1 Install theCPU...........................................................................11
STEP 2 Set Jumper............................................................................... 12
STEP3InstallDDR SDRAM System Memory........................................ 12
STEP 4 Install Peripherals in System Case............................................ 13
STEP5MounttheMainboardontheComputerChassis........................ 14
STEP6Connect Front Panel Header (JP12),FrontPanel AUDIO/ USB/
1394Connector(JP16) ......................................................................... 15
STEP7 Connect IDE, Floppyand Serial ATA Drives.............................. 16
STEP8 Connect OtherInternalPeripherals............................................ 17
STEP9InstallAdd-onCardsin Expansion Slots.................................... 19
STEP10Connectthe Power Supply Connectors ................................... 19
STEP11ConnectExternalPeripheralstoBackPanel ........................... 20
STEP 12 First Time System Boot Up ..................................................... 21
STEP 13 Install Drivers & Software Components ................................... 22
3.2 JUMPER SETTINGS ................................................................................. 23
JUMPERS & CONNECTORS GUIDE.................................................... 24
TABLEOF CONTENTS
- 2 -
Jumper
ClearCMOS Setting (JP1) ................................................................... 26
Back-Panel Connectors
VGAport ............................................................................................... 27
DVIport ................................................................................................. 27
1394 port............................................................................................... 27
PS/2Mouse& PS/2 Keyboard ports...................................................... 27
LANport................................................................................................ 27
USBports ............................................................................................. 27
Side-SURRport .................................................................................... 28
Line-Inport ............................................................................................ 28
Bass/Centerport ................................................................................... 28
Surround-Backport ............................................................................... 28
Front-Outport ........................................................................................ 28
Clear CMOS button ............................................................................... 28
Front-Panel Connectors
ATXPowerOn/Off Switch connector (PWON) ........................................ 29
HDD LED connector (HLED) ................................................................. 29
PowerLED connector (PWR_LED)....................................................... 30
Hardware Reset connector (RST) .......................................................... 30
FrontPanelAUDIO/USB/ 1394 connector (JP16).................................. 31
Internal Peripherals Connectors
EnhancedIDEandFloppyconnectors ................................................... 32
SerialATA connectors (SATA1/SATA2).................................................. 32
Other Connectors
ATXPower Supply connectors(ATX1/CN5/ATX2) ................................. 33
Fanconnectors - FAN1/2/3OFFwhensuspend ..................................... 34
- 3 -
WirelessKeyboardand Mouse connector (JP2) .................................... 34
SPDIFIn/out connector (CN4)................................................................ 35
CD-In connector (CN6) (Black)............................................................... 35
AUX_In connector (CN2) (White) ........................................................... 35
EXT.PRINT port (J1) ............................................................................. 36
DualUSBheader(JP3)/USBconnectors (JP6, JP7)............................. 37
EXT. GPI header (JP17) ........................................................................ 37
3.3 System Memory Configuration................................................................ 38
InstallMemory........................................................................................ 38
UpgradeMemory................................................................................... 38
4 SOFTWARE UTILITY........................................................................ 39
4.1 Install SATA Driver During Windows XP or 2000 installation ............... 39
4.1.1 Preparation............................................................................................ 39
4.1.2 Start installation .................................................................................... 39
4.2 Mainboard CD Overview ......................................................................... 42
4.3 Install Mainboard Software ...................................................................... 43
4.3.A Install ATI RADEON Xpress 2000 Dirver .............................................. 44
4.3.B Install ULi South Bridge Driver ............................................................ 44
4.3.C Install Broadcom Giga Driver ............................................................... 45
4.3.D Install High Definition Driver ................................................................ 45
4.3.E Install ULI USB2.0 Driver ..................................................................... 46
4.3.F Install DirectX9 Utility ............................................................................ 46
4.4 View the User's Manual............................................................................ 47
5 BIOS SETUP ..................................................................................... 48
5.1 ENTER BIOS ............................................................................................. 48
5.2 THE MAIN MENU ...................................................................................... 49
Standard CMOS Features ......................................................................... 51
- 4 -
Advanced BIOS Features .......................................................................... 54
AdvancedChipset Features ...................................................................... 58
IntegratedPeripherals................................................................................ 61
Power Management Setup ........................................................................ 65
PNP/PCIConfiguration .............................................................................. 69
PC Health Status ....................................................................................... 71
Frequency/VoltageControl......................................................................... 73
Load Fail-Safe Defaults ............................................................................. 74
Load Optimized Defaults ........................................................................... 74
SetPassword ............................................................................................ 75
Save & Exit Setup...................................................................................... 76
ExitWithou Saving..................................................................................... 76
- 5 -
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle FT20 mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle FT20 mainboard. You will find
that installing your new Shuttle FT20 mainboard is just easy. Bundled with an
array of onboard functions, the highly-integrated FT20 mainboard provides you
with a total solution to build the most stable and reliable system. Refer to sec-
tions 3.2 Jumper Settings and Chapter 4 Drivers/Software Utilities to
find out how to get the best out of your new mainboard. Chapter 5 BIOS
Setup also contains the relevant information on how to tune up your system to
achieve higher performance.
System Integrator
You have wisely chosen Shuttle FT20 to construct your system. Shuttle FT20
incorporates all the state-of-the-art technology of the ATI RS480+Uli M1573
Chip for AMD TM Athlon64 939 CPU. It integrates the most advanced functions
you can find to date in a compact Shuttle Form Factor ATX board.
1 INTRODUCTION
Inhaltsverzeichnis
Andere Shuttle Hauptplatine Handbücher
Shuttle
Shuttle FB51 Bedienungsanleitung
Shuttle
Shuttle AV14 Bedienungsanleitung
Shuttle
Shuttle FN85 Bedienungsanleitung
Shuttle
Shuttle AV49 Bedienungsanleitung
Shuttle
Shuttle DL30N Series Bedienungsanleitung
Shuttle
Shuttle MZ11 Bedienungsanleitung
Shuttle
Shuttle FV25 Bedienungsanleitung
Shuttle
Shuttle HOT-679 Bedienungsanleitung
Shuttle
Shuttle FN41 Bedienungsanleitung
Shuttle
Shuttle AV64 Bedienungsanleitung
Shuttle
Shuttle FN95 Bedienungsanleitung
Shuttle
Shuttle Spacewalker MV25 Bedienungsanleitung
Shuttle
Shuttle HOT-555 Bedienungsanleitung
Shuttle
Shuttle AB60N Bedienungsanleitung
Shuttle
Shuttle AK35GT Bedienungsanleitung
Shuttle
Shuttle HOT-675Z Bedienungsanleitung
Shuttle
Shuttle AB49 Bedienungsanleitung
Shuttle
Shuttle HOT-579 Bedienungsanleitung
Shuttle
Shuttle Spacewalke AK21 Bedienungsanleitung
Shuttle
Shuttle AN35 Ultra Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
