Shuttle WM168b Bedienungsanleitung

User’s Guide
for
Shuttle Wireless LAN USB Module

Shuttle®
User’s Guide for Wireless LAN USB Module
Manual Version 1.0
FCC Regulation Information
TheequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB
DigitalDevice,pursuant to part 15 of the FCC rules. These limits are designed to
providereasonableprotectionagainstharmful interferenceina residentialinstalla-
tion.This equipmentgenerates,uses andcanradiate radiofrequencyenergy and,
if not installed and used in accordance with the instructions, may cause harmful
interferenceto radiocommunication.However, there isnoguarantee thatinterfer-
encewill notoccurin aparticularinstallation. Ifthisequipment doescauseharmful
interferenceto radio or television reception, which can bedetermined by turning
theequipmentoffandon,the user is encouraged to try to correct the interference
byoneor more of the following measures:
nReorientor relocate thereceivingantenna.
nIncreasethe separation between the equipment andreceiver.
nConnectthe equipmentintoan outlet ona circuit differentfromthat towhichthe
receiveris connected.
nConsultthe dealer or an experienced radio/TV technician for help.
Theequipmentis for home or office use.
Copyright
Copyright©2003byShuttle®Inc.AllRightsReserved.Thispublication,includingall
photos,illustrations, and software,isprotected under internationalcopyrightlaws.
Reproducingany ofthe materialcontainedherein isprohibitedwithout theconsent
ofthe publisher. Disclaimer
Shuttle®Inc.shallnotbe liableforany incidental orconsequential damages result-
ingfrom the use of this product. This company makesnorepresentationsor war-
rantiesregardingthe contents of this manual. This company reserves the right to
revisethe manual or make changes in the specificationsofthe product described
hereinat anytimeand without noticeand without obligationtonotify anypersonof
suchrevision or changes.
General Notice: All the other trademarks and registered trademarks are the
property of their respective owners.

1. INTRODUCTION...............................................................1
1.1 Features..........................................................................1
1.2 Package Contents................................................................2
1.3 System Requirements...........................................................2
1.4 The802.11b Wireless LAN USB Module...................................2
2. INSTALLATION OF THE 802.11b WIRELESS LAN USB
MODULE............................................................................3
2.1 Hardware Setup.....................................................................3
2.2 Installation Precaution...........................................................7
2.3 Installing the WLANDriver......................................................8
2.4 InstallationNotes - Windows XP.............................................10
2.5 Verifying a Successful Installation.........................................12
3. CONFIGURATION FOR WINDOWS XP..............................13
3.1 ToConnectanAvailableNetworkviaWirelessZeroConfiguratio....
.....................................................................................13
3.2 ToConfigure theWirelessNetworks Properties.......................14
3.3 AccesstoSpecific WirelessNetwork Types...........................17
4. SHUTTLE WIRELESS LAN BASICS..................................18
4.1 Tray Icon.............................................................................18
4.2 Right-ClickMenu of the Tray Icon...........................................19
Wireless Radio On...............................................................19
Wireless Radio Off...............................................................19
Remove Status Icon.............................................................19
Wireless Network Status......................................................20
AdvancedConfiguration........................................................20
WEP Encryption..................................................................20
Version Information.............................................................20
Table of Contents

4.3 Program Controls................................................................20
The Status Tab...............................................................21
The Configuration Tab..........................................................23
The Encryption Tab..............................................................25
The Site Survey Tab.............................................................27
The About Tab.....................................................................27
APPENDIX A: TROUBLESHOOTING.....................................28
UninstallShuttle Wireless LAN andtheModule’sDriver.................28
The802.11bWLANUSBModule Does NotWorkProperly.............31
UpgradeShuttle Wireless LANandtheModule’s Driver.................31
Reset the Country Selection.......................................................33
APPENDIX B: SPECIFICATIONS............................................34
APPENDIX C: GLOSSARY.......................................................35

1
1. INTRODUCTION
The802.11bWireless LAN USB Module aims to let your XPC quickly
and seamlessly communicate with a 802.11b (at up to 11 Mbps)
networks. Wireless LAN is local area networking without wires,
which uses radio frequencies to transmit and receive data between
PC’s or other network devices. With this wireless LAN USB Mod-
ule, surfing on the Internet couldn’t be any easier. Simply install
the USB Module into the reserve area, launch the attached friendly-
interfaced program – Shuttle Wireless LAN to configure the Mod-
ule, and you will be ready to experience how the LAN (local area
network) can be accessed anywhere. You can operate the network
ineither an independentmode or aninfrastructure mode. Theformer,
which is also known as peer-to-peer or ad-hoc network, lets you
directly make connection with other wireless-equipped computers,
and the later, the so-called infrastructure network, allows you to
communicate with wired LAN via an access point.
To obtain the complete benefits your 802.11b Wireless LAN USB
Module provides, please read this manual carefully before using it.
This module is applicable for: SS51G/ SB51G/ SK41G/ SN41G2/
SB52G2/ SB61G2/ SN45G/ SB75G2.
1.1 Features
With 802.11b Wireless LAN USB Module, you can
-exchange data over the air, which minimizes the need for
wired connections
-possess the portability and mobility of wireless networking
connectivity wherever you are
-operate Ad-Hoc or Infrastructure modes
-utilize up to 128-bit WEP encryption
-enjoy high-speed data transfer rate up to 11 Mbps
-employ automatic data rate switching which offers maximum
reliability, throughput and connectivity
-monitor and configure the network via the supplied friendly-
interfaced application ~Shuttle Wireless LAN Tool

2
1.2 Package Contents
Before starting installation, please make sure the package you
purchased includes the following items:
aOne 802.11b Wireless LAN USB Module
aOne Antenna
aTwo Washers
aOne Daughterboard
aOne USB data cable
a4 x Screws
aOne Setup Wizard CD-ROM with Installation Guide
aOne User Manual
If any of the items listed above are missing or damaged, please
contact your distributor.
1.3 System Requirements
To properly operate your 802.11b Wireless LAN USB Module, your
computer must meet the following minimum requirements:
a300 MHz processor or higher
a32 MB RAM or above
aA CD-ROM drive
aMicrosoft Windows 98 SE/ Me/ 2000 or Windows XP
1.4 The 802.11b Wireless LAN USB Module
Your 802.11b Wireless LAN USB Module should be located in the
USB port on the back panel of your XPC.

3
2. INSTALLATION OF THE 802.11b
WIRELESS LAN USB MODULE
It’s free and easy for you to install your 802.11b Wireless LAN USB
Module and the attached software - Shuttle Wireless LAN Tool.
Simply attach the hardware and with a few clicks of the mouse,
you will complete the installation. To have the 802.11b WLAN USB
Module operated appropriately, please read and follow the instruc-
tions below carefully.
2.1 Hardware Setup
Refer to the following steps to arm your XPC with the
Module.
-STEP1.
Remove the case by unfas-
tening the three screws on
the back panel.
-STEP2.
Use a 6mm screwdriver hori-
zontally puncture the reserve
hole from outside in. Once the
screwdriver can pass through
the reserve hole, make sure
the cover is completely de-
tached from the chassis.
Note :If the cover still does not detach, carefully bend it by pushing
down from the inside of the chassis.

4
1
2
1
0
C
N
1
P
A
L
-
B
9
4
V
-
0
JM644
V
E
R
:
1
.
0
V1
D1-
D1+
GND
GND
V2
D2-
D2+
GND
GND
-STEP3.
Screwthe daughterboardto
the front chassis, on which
there are two locators as
shown in the picture below.
-STEP4.
Establish a link between the daughterboard and the mainboard with
a USB cable by connecting one end of it to the black USB port on
the daughterboard in advance.
-STEP5.
Connect the other end of
the USB cable to a USB
header on the mainboard.
Caution :The white USB sockets should be facing outwards as you install the daughterboard.
Note :Make sure all the connectors are aligned in the correct direction.
Note :For SS51G, SB51G, SK41G, SN45G user, if user has installed the PN21 bluetooth module,
use the existing daughterboard and connect the USB interface to the spare slot.

5
Caution:When inserting the cable
connector, check the socket align-
ment and only push horizontally.
Do not turning or twist the cable.
-STEP6.
Screw the Wireless LAN
USB Module to the two
holes on the upside of the
chassis arm, near the rear
of the XPC.
-STEP7.
Install the antenna cable connector flushly into the back chassis
via the side reserve hole.
Antenna cable connector
Note:If some difficulty is found while inserting the antenna socket into the reserve hole,
make sure the surface is clean. Finally, check the alignment and then use some more force .
Shuttle
P/N :PN11
0678
!
FC
Wireless LAN USB Module
Antenna cable
connector
Screws
USB module cable
MAC:
Y26110210021

6
Use a washer and lock to secure the antenna from the outside.
-STEP8.
Connect the USB module
cable to the daughterboard
by attaching one end of the
USB cable to either of the
two white USB ports on the
daughterboard.
-STEP9.
Connecting the antenna with header and secure it properly. Adjust
the antenna to the vertical position for good reception. Double check
if all the connectors are secure properly.
-STEP10. Fasten the case and completed the installation.
12
Note :Make sure all the connectors are aligned in the correct direction.
Inhaltsverzeichnis
Andere Shuttle Drahtlosmodul Handbücher
Beliebte Drahtlosmodul Handbücher anderer Marken

Cooper Wiring Devices
Cooper Wiring Devices ESPIRE RF RFAPM Bedienungsanleitung

Yuga
Yuga CLM920 Bedienungsanleitung

Waldmann
Waldmann TALK Bluetooth Bedienungsanleitung

Telit Wireless Solutions
Telit Wireless Solutions UC864-G Installationshandbuch

Ebyte
Ebyte E07-900M10S Bedienungsanleitung

Quectel
Quectel SC690A Series Beilage

Panasonic
Panasonic INDUSTRY PAN9028 Kurzanleitung zur Einrichtung

Ebyte
Ebyte E70-433NW30S Bedienungsanleitung

LongSung Technology
LongSung Technology U9507E Bedienungsanleitung

Wistron NeWeb
Wistron NeWeb DNUR-S2 Bedienungsanleitung

Ebyte
Ebyte E49-400M20S4 Bedienungsanleitung

RF-Star
RF-Star SimpleLink RF-BM-2652P1 CC2652P Bedienungsanleitung






