Sielox Trove2SL2 Bedienungsanleitung

Trove2SL2

- Trove2 enclosure with Altronix/Sielox backplane (TSL2)

TSL2

- Altronix/Sielox backplane only

SIGNALING

Rev. THC080520

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners.

Installation Guide

Access & Power Integration

- 2 - Trove2SL2 / TSL2 Installation Guide

Overview:

Trove2SL2 accommodates various combinations of Sielox boards with or without Altronix power supplies and accessories for access systems.

Specifications:

• 16 Gauge grey backplane and enclosure with ample knockouts for convenient access.

Trove2SL2

Trove2 enclosure with TSL2 Altronix/Sielox backplane.

• Includes: tamper switch, cam lock, and mounting hardware.

Enclosure Dimensions (H x W x D): 27.25” x 21.75” x 6.5” (692.15mm x 552.5mm x 165.1mm).

TSL2

Altronix/Sielox backplane only

• Includes mounting hardware.

Dimensions (H x W x D): 25.375” x 19.375” x 0.3125” (644.5mm x 482.6mm x 7.9mm).

TSL2 accommodates a combination of the following:

Altronix Modules:

• Up to two (2) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB, or eFlow104NB.

• One (1) ACM8(CB), ACMS8/ACMS8CB, PDS8(CB), VR6, MOM5, PD4UL(CB), PD8UL(CB), or ACM4(CB).

Sielox Boards:

• Up to eight (8) AC-1700.

Agency Listings:

• UL 294 - 6th edition: Line Security I, Destructive Attack I, Endurance IV, Stand-by Power II*.

* Stand-by Power Level I if no battery is supplied.

• This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.

• CE European Conformity.

Installation Instructions for Trove2:

1. Remove backplane from enclosure prior to mounting (do not discard hardware).

2. Trove2SL2 (Pg. 4): Mark and predrill holes on the wall to line up with the top three keyholes in the enclosure. Install three upper

fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper screws;

level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes and install the three

fasteners. Place the enclosure’s upper keyholes over the three upper screws. Install the three

lower screws and make sure to tighten all screws.

3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent)

in desired location, opposite hinge. Slide the tamper switch bracket onto the edge of

the enclosure approximately 2” from the right side (Fig. 1, pg. 2).

Connect tamper switch wiring to the Access Control Panel input or the appropriate

UL Listed reporting device. To activate alarm signal open the door of the enclosure.

4. Mount Altronix/Sielox modules to TSL2 backplane, refer to page 3.

Fig. 1

Tamper Switch

(included)

To Access Control Panel or

UL Listed Reporting Device

Edge of

Enclosure

Trove2SL2 / TSL2 Installation Guide - 3 -

Sielox

AC-1700

Sielox

AC-1700

Sielox

AC-1700

Sielox

AC-1700

RJ45 Jack

Altronix

Power Supply

Sub-Assembly

Altronix

Power Supply

Sub-Assembly

Altronix

Sub-Assembly

Metal Spacer Placement

Altronix

Sub-Assembly

TSL2: Configuration of Altronix Power Supply

and/or Sub-Assembly Boards and Sielox AC-1700 Modules

1. Fasten spacers (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards

(Fig. 2, pg. 2). Fasten metal spacers in the correct locations to provide proper grounding, see below (Fig. 2, pg. 2).

Note: Each Altronix sub-assembly position can accommodate one (1) ACM8/ACM8CB, ACMS8/ACMS8CB, PD4UL/PD4ULCB,

PD8UL/PD8ULCB, MOM5, PDS8(CB) or VR6.

2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2, 2a, pg. 2).

3. Mount Sielox AC-1700 modules into the correct positions (Fig. 2, pg. 2).

Note: Sielox AC-1700 boards have one (1) RJ45 jack each.

Please make sure that they are mounted correctly, as shown in Fig. 2 below

4. Fasten TSL2 backplane to Trove2 enclosure utilizing pan head screws (provided).

Fig. 2

Pem

Spacer

Power Supply,

Sub-Assembly

or Sielox AC-1700

BackplanePan Head

Screw

Fig. 2a

- 4 - Trove2SL2 / TSL2 Installation Guide

TSL2: Configuration of Sielox AC-1700 Modules

1. Fasten spacers (provided) to pems that match the hole pattern for Sielox AC-1700 modules, see below (Fig. 3, pg. 4).

3. Mount Sielox AC-1700 modules into the correct positions (Fig. 3, pg. 4).

Note: Sielox AC-1700 boards have one (1) RJ45 jack each.

Please make sure that they are mounted correctly, as shown in Fig. 3 below

4. Fasten TSL2 backplane to Trove2 enclosure utilizing pan head screws (provided).

Fig. 3

Sielox

AC-1700

Sielox

AC-1700

Sielox

AC-1700

Sielox

AC-1700

RJ45 Jack

Sielox

AC-1700

Sielox

AC-1700

Sielox

AC-1700

Sielox

AC-1700

RJ45 Jack

Pem

Spacer

Power Supply,

Sub-Assembly

or Sielox AC-1700

BackplanePan Head

Screw

Fig. 3a

Trove2SL2 / TSL2 Installation Guide - 5 -

Notes:

- 6 - Trove2SL2 / TSL2 Installation Guide

eFlow Power Supply/Chargers can be Controlled and Monitored while

Reporting Power/Diagnostics from Anywhere over the Network...

LINQ2 Mounts Inside any Trove Enclosure

LINQ2 - Network Communication Module

LINQ2 provides remote IP access to real-time data from eFlow power supply/chargers to help

keep systems up and running at optimal levels. It facilitates fast and easy installation and set-up,

minimizes system downtime, and eliminates unnecessary service calls, which helps reduce Total

Cost of Ownership (TCO) - as well as creating a new source of Recurring Monthly Revenue (RMR).

LINQ2

Features:

- UL Listed in the U.S. and Canada.

- Local or remote control of up to (2) two Altronix eFlow power output(s) via LAN and/or WAN.

- Monitor real time diagnostics: DC output voltage, output current, AC & battery status/service, input trigger state change,

output state change and unit temperature.

- Accesscontrolandusermanagment:Restrictread/write,Restrictuserstospecicresources

- Two (2) integral network controlled Form “C” Relays.

- Three (3) programmable input triggers: Control relays and power supplies via external hardware sources.

- EmailandWindowsDashboardnotications

- Event log tracks history.

- Secure Socket Layer (SSL).

- Programmable via USB or web browser - includes operating software and 6 ft. USB cable.

LINQ2 Module

Altronix eFlow

Power Supply

Network Connection:

Installation, Programming

and Monitoring

Trove2SL2 / TSL2 Installation Guide - 7 -

2.2” (55.9mm) 2.2” (55.9mm)

19.375” (492.1mm)

12.625” (320.7mm)

8.5” (215.9mm)

16.25” (412.8mm)

1.0” (25.4mm)

9.2” (233.7mm) 9.2” (233.7mm)

7.5” (190.5mm) 7.5” (190.5mm)

25.375” (644.6mm)

0.45” (11.4mm)0.45” (11.4mm)

0.156”

( 3.96mm)

TSL2 Dimensions (H x W x D):

25.375” x 19.375” x 0.5” (644.6mm x 492.1mm x 12.7mm)

- 8 - Trove2SL2 / TSL2 Installation Guide

6.75” (171.5mm)8.25” (209.5mm)

8.00” (203.2mm)

2.00” (50.8mm)

1.25” (31.8mm)

5.25” (133.4mm) 5.25” (133.4mm)7.00” (177.8mm)

1.25” (31.8mm)

6.25” (158.8mm) 19.80” (502.9mm)

1.00” (25.4mm)

27” (685.8mm)

1.5”

(38.1mm)

2.00” (50.8mm) 2.00” (50.8mm)

3.5”(88.9mm) 3.5”(88.9mm)

21.50” (546.1mm)

5.25” (133.35mm) 5.25” (133.35mm)

6.25” (158.8mm)

1.25”

(31.8mm)

0.85” (21.6mm)

0.5625” (14.3mm)

2.415” (61.3mm)

0.685” (17.4mm)

1.77”

(45mm)

0.885” (22.5mm)

1.125” (28.3mm)

Knockouts

2.00” (50.8mm) 2.00” (50.8mm)

Trove2SL2 Enclosure Dimensions (H x W x D):

27.25” x 21.75” x 6.5” (692.15mm x 552.5mm x 165.1mm)

Sielox LLC is not responsible for any typographical errors.

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

170 East Ninth Avenue Runnemede, New Jersey 08078 | phone: 856-939-9300

web site: www.sielox.com | e-mail: [email protected]

IITrove2SL2 / TSL2 J06U

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis