Siemens SIMATIC Ident MV340 Benutzerhandbuch
System Manual 2012
SIMATIC MV340
Machine Vision Systems
ii SIMATIC MV340 User’s Manual
Legal Information
Scope of Validity of this Document
This documentation is valid for all supplied variations of the SIMATIC MV340 system and
describes the state of delivery as of February 2012.
Registered Trademarks
SIMATIC® is a registered trademark of the Siemens AG.
Warning Notice System
This manual contains notices you have to observe in order to ensure your personal safety,
as well as to prevent damage to property. The notices referring to your personal safety are
highlighted in the manual by a safety alert symbol, notices referring only to property damage
have no safety alert symbol. These notices shown below are graded according to the
degree of danger.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel
qualified for the specific task in accordance with the relevant documentation for the specific
task, in particular its warning notices and safety instructions. Qualified personnel are those
who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper Use of Siemens Products
Note the following:
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware
and software described. Since variance cannot be precluded entirely, we cannot guarantee
full consistency. However, the information in this publication is reviewed regularly and any
necessary corrections are included in subsequent editions.
SIMATIC MV340 User’s Manual iii
Safety Notes
SIMATIC RFID products comply with the salient safety specifications to IEC, VDE, EN, UL
and CSA. If you have questions about the validity of the installation in the planned environment,
please contact your service representative.
Repairs
Repairs may only be carried out by authorized qualified personnel.
System Expansion
Only install system expansion devices designed for this device. If you install other
upgrades, you may damage the system or violate the safety requirements and regulations
for radio frequency interference suppression. Contact your technical support team or your
sales outlet to find out which system upgrades are suitable for installation.
iv SIMATIC MV340 User’s Manual
SIMATIC MV340 User’s Manual v
About the SIMATIC MV340
The key features of the SIMATIC MV340 are:
• Best-in-class DPM decode algorithms
• Image Enhance optimization for difficult-to-decode direct part marks
• LED targeting pattern
• USB and RS-232 interface options
• Fast processing
• Rugged design
• Sustains 50+ drops from six feet to concrete
About This Manual
This manual provides complete information on setting up, installing, and configuring the
SIMATIC MV340. The chapters are presented in the order in which the imager would be
assembled, configured, and optimized.
Highlighting
Cross-references and web addresses are highlighted in blue bold.
References to ESP, its toolbar headings (Communications, Symbologies, I/O Parameters,
etc.) and menu headings are highlighted in Bold Initial Caps.
vi SIMATIC MV340 User’s Manual
Statement of Agency Compliance
The SIMATIC MV340 has been tested for compliance with FCC regulations and was found
to be compliant with all applicable FCC Rules and Regulations.
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this
device must not be co-located or operate in conjunction with any other antenna or transmitter.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The SIMATIC MV340 has been tested for compliance to CE (Conformité Européenne)
standards and guidelines and was found to conform to applicable CE standards, specifically
the EMC requirements: EN 55024, ESD EN 61000-4-2, Radiated RF Immunity EN 61000-4-3,
EFT EN 61000-4-4, Surge EN 61000-4-5, Conducted RF Immunity EN 61000-4-6, Magnetic
Field Immunity EN 61000-4-8, Voltage Dips EN 61000-4-11, Emissions EN 55022, Class B
Radiated Emissions, and Class B Conducted Emission, Current Harmonic Emissions IEC
61000-3-2, Voltage Fluctuation and Flicker IEC 61000-3-3 Class B.
SIMATIC MV340 User’s Manual vii
Statement of RoHS Compliance
The SIMATIC MV340 Handheld DPM Imager is RoHS-Compliant. All standard accessories
are RoHS-Compliant. These products meet all the requirements of the European Parliament
and the Council of the European Union for RoHS compliance. In accordance with the latest
requirements, our RoHS-compliant products and packaging do not contain intentionally
added Deca-BDE, Perfluorooctanes (PFOS) or Perfluorooctanoic Acid (PFOA) compounds
above the maximum trace levels. To view the documents stating these requirements,
please visit:
http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:32002L0095:EN:HTML
and
http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2006:372:0032:0034:EN:PDF
Please contact your sales manager for a complete list of Siemens’s RoHS-Compliant products.
This declaration is based upon information obtained from sources which Siemens believes to be reliable, and
from random sample testing; however, the information is provided without any representation of warranty,
expressed or implied, regarding accuracy or correctness. Siemens does not specifically run any analysis on our
raw materials or end product to measure for these substances.
The information provided in this certification notice is correct to the best of Siemens’s knowledge at the date of
publication. This notice is not to be considered a warranty or quality specification. Users are responsible for
determining the applicability of any RoHS legislation or regulations based on their individual use of the product.
viii SIMATIC MV340 User’s Manual
SIMATIC MV340 User’s Manual 1-1
1 Quick Start
Contents
This section is designed to get your SIMATIC MV340 up and running quickly so you can get
a sense of its capabilities and test sample symbols. Detailed setup information for configuring
the imager for your specific application can be obtained in the subsequent sections.
Your interface type will determine how data is received by your host. When sending data by
USB, you must open a text editor in your host computer. When sending data serially, you
must use a terminal program such as HyperTerminal or
ESP
’s
Terminal
view (RS-232 only).
Check Required Hardware ........................................................................................................... 1-2
USB Interface ............................................................................................................................... 1-3
RS-232 Interface .......................................................................................................................... 1-4
Install ESP.................................................................................................................................... 1-5
Select Model................................................................................................................................. 1-6
Select Protocol and Connect to Imager........................................................................................ 1-7
1-2 SIMATIC MV340 User’s Manual
Check Required Hardware
Check Required Hardware
Parts List for USB SIMATIC MV340:
1. One SIMATIC MV340
• One 12 ft. USB cable (pre-attached to imager; not shown)
Parts List for RS-232 SIMATIC MV340:
1. One SIMATIC MV340
2. Cable clip attachment
3. Spacers
4. Two threaded screws
5. RS-232 Interface Kit
– 8 ft. coiled R-232 cable
– Power supply (U.S., Euro, or UK; not shown)
1
2
3
4
5
Inhaltsverzeichnis
Andere Siemens Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
