Siemens SIMATIC RF610M Bedienungsanleitung
SIMATIC RFID systems User application for RF610M Mobile Reader
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
Introduction
1
Description
2
Installing Software
3
Parameterization of the
software
4
Read and evaluate data
5
Troubleshooting
6
Appendix
A
SIMATIC
RFID systems
User application for RF610M Mobile
Reader
Operating Instructions
Edition 12/2005
D0175-U001-A0-7618
Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
Danger
indicates that death or severe personal injury will result if proper precautions are not taken.
Warning
indicates that death or severe personal injury may result if proper precautions are not taken.
Caution
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
Caution
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
Notice
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes
in this documentation qualified persons are defined as persons who are authorized to commission, ground and
label devices, systems and circuits in accordance with established safety practices and standards.
Prescribed Usage
Note the following:
Warning
This device may only be used for the applications described in the catalog or the technical description and only in
connection with devices or components from other manufacturers which have been approved or recommended
by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and
assembly as well as careful operation and maintenance.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Automation and Drives
Postfach 48 48
90437 NÜRNBERG
GERMANY
Order No.: D0175-U001-A0-7618
Edition 11/2005
Copyright © Siemens AG 2005.
Technical data subject to change
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618 iii
Table of contents
1 Introduction............................................................................................................................................. 1-1
2 Description.............................................................................................................................................. 2-1
3 Installing Software .................................................................................................................................. 3-1
4 Parameterization of the software ............................................................................................................ 4-1
5 Read and evaluate data.......................................................................................................................... 5-1
5.1 Start RFID scan and identify tags .............................................................................................. 5-1
5.2 Assigning identified tags to a name or barcode......................................................................... 5-3
5.3 Processing acquired data .......................................................................................................... 5-4
6 Troubleshooting...................................................................................................................................... 6-1
A Appendix.................................................................................................................................................A-1
A.1 Service & support.......................................................................................................................A-1
A.2 Contact partner .......................................................................................................................... A-2
A.3 Training ......................................................................................................................................A-2
Glossary ..................................................................................................................................... Glossary-1
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618 1-1
Introduction 1
Purpose of the Manual
This manual contains all the information you need for installing and handling the user
application for the SIMATIC RF610M Mobile Reader.
The manual is intended for commissioning personnel and machine operators who start up
the application themselves, use it to identify RFID tags and to assign names or barcodes to
them.
Scope of this manual
This documentation is valid for Version 1.1.3 of the SIMATIC RF610M Mobile Reader and
describes the state of the product package as of December 2005.
Position in the Information Landscape
For supplementary instructions on how to handle the SIMATIC RF610M Mobile Reader,
please refer to the corresponding manuals.
Conventions
The abbreviation "reader" is also used within this documentation for the product name
SIMATIC RF610M Mobile Reader. The user application for the SIMATIC RF610M Mobile
Reader is also referred to as the "application".
History
Version Remarks
12/2005 First edition
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618 2-1
Description 2
Application
The user application for the SIMATIC RF610M Mobile Reader allows you to identify RFID
tags and to assign names or barcodes to them. The data obtained can be saved and
evaluated for further processing.
Notice
Tag compatibility
The SIMATIC RF610M Mobile Reader only recognizes RFID tags, that are described with an
Electronic Product Code (EPC).
Functionality
• Identification of RFID tags
• Assignment of names or barcodes to the identified RFID tags
• Saving and evaluating the data obtained in XML format
Notice
Operation of the SIMATIC RF610M Mobile Reader is not permitted in Europe
The RFID module of the SIMATIC RF610M Mobile Reader operates in the North
American UHF range of 902 to 928 MHz. Operation in Europe can interfere with the GSM
network and is not permitted.
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618 3-1
Installing Software 3
Requirement
To install the user application for the SIMATIC RF610M Mobile Reader, you will need the
following hardware and software components:
• Product CD "User application for SIMATIC RF610M Mobile Reader".
• Microsoft Active Sync from Version 3.4
• PC with Windows 2000 / XP and integrated Microsoft .Net Framework Version 1.1 and
higher
Note
Download of Microsoft Active Sync
Microsoft Active Sync is not part of the scope of supply. However, the current version of
the application can be downloaded from www.microsoft.com.
Notice
Compatible Microsoft .Net Framework Version
Check under Start > Settings > Control Panel > Software whether you have Microsoft
.Net Framework of Version 1.1 or higher on your PC. If this is not the case, download an
update from www.microsoft.com.
Procedure
1. Install Microsoft Active Sync on the PC
2. Install a USB driver for SIMATIC RF610M Mobile Reader on the PC
3. Establish a partnership between the PC and the SIMATIC RF610M Mobile Reader
4. Install the user application for the SIMATIC RF610M Mobile Reader
Note
Necessary Installation Steps
If the user application is already installed on your reader, only perform installation steps
1 to 3.
Installing Software
User application for RF610M Mobile Reader
3-2 Operating Instructions, Edition 12/2005, D0175-U001-A0-7618
Install Microsoft Active Sync on the PC
With Microsoft Active Sync, you can synchronize files between your PC and the SIMATIC
RF610M Mobile Reader and transfer applications to the reader. With an Active Sync
connection, the reader can be accessed as a drive in Windows Explorer under "Mobile
Device". For further information on Microsoft Active Sync, see the accompanying help file.
If Microsoft Active Sync is not installed on your PC or if an earlier version than 3.4 is
installed, you should install the current version available from Microsoft.
Notice
Update / Installation of Microsoft Active Sync
Before you update or install Microsoft Active Sync, you must deinstall the old version.
Proceed as follows when installing Microsoft Active Sync:
1. Start the installation program by double-clicking the file msasync.exe.
2. Follow the instructions on the screen.
Note
Standard Sync Folder
When installation has been completed, Microsoft Active Sync creates the folder
Workabout Pro My Documents on the desktop of your PC.
In the Active Sync settings menu under Sync Options, when you select the option Data,
the content of the desktop folder is synchronized on the reader for every Active Sync
procedure with the content of the folder My Documents on the reader.
Inhaltsverzeichnis
Andere Siemens Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
