Siemens RB500 Bedienungsanleitung

Siemens AG

Card reader

RB500

Installation Guide

1 2 3

RB500 EM

Book Contents

English ..........................................................3

Svenska .......................................................19

Document nr: 82336-7

Edition: 04.2010

RB500 Installation Guide 3

ENG

English

Data and design subject to change without notice.

Supply subject to availability.

We reserve all rights in this document and in the subject thereof. By

acceptance of the document the recipient acknowledges these rights and

undertakes not to publish the document nor the subject thereof in full or in

part, nor to make them available to any third party without our prior express

written authorization, nor to use it for any purpose other than for which it

was delivered to him.

4 RB500 Installation Guide

ENG

Contents

General ........................................................ 5

Important! .............................................................................. 5

About this document ............................................................ 5

Safety ........................................................... 6

Standards & guidelines.............................. 6

Power supply .............................................. 8

Cable recommendations ............................ 8

Technical data ............................................. 9

Reading distances ................................................................ 9

General features ....................................... 10

Power Up ............................................................................. 10

Programming Mode ............................................................ 10

Timeout Period .................................................................... 10

Exit Programming Mode ..................................................... 10

Preset Congurations (short commands) ........................ 11

Installation ................................................. 12

Mechanical ........................................................................... 12

Outdoor use ......................................................................... 12

Wiring ........................................................ 14

2010 E2V Connections ....................................................... 16

2010 E2V terminal blocks ................................................... 17

RB500 Installation Guide 5

ENG

General

The RB500 can be connected to the system

product Bewator 2010 Omnis. The RB500 can be

ordered in two different variants supporting two

different reading technologies:

• Cotag technology (both active & passive)

• EM4102 technology

Important!

For proper use, this card reader needs that the

Bewator 2010 Omnis reader-node E2V has a

rmware version 4.012, or higher.

About this document

This document only serves as a Installation Guide

when using the RB500 with the main factory set-

ting and only the “short commands”.

6 RB500 Installation Guide

ENG

Safety

• Read the general safety precautions before

operating the device.

• Follow all warnings and instructions marked

on the device.

• Keep this document for reference.

• Always pass this document on together with

the product.

• The device has been approved for use in the

European Union. In countries outside the EU,

the local conditions and regulations need to be

checked before putting the device into service.

• Please also take into account any additional

country-specic, local safety standards or

regulations concerning project planning, op-

eration and disposal of the product.

• Maintenance work must only be carried out by

trained specialists.

Standards & guidelines

This product complies with the requirements of the

European Directives.

The EU declaration of conformity is available from:

Siemens AG

Siemensalle 84

D-76187 Karlsruhe

RB500 Installation Guide 7

ENG

European Directive 1999/5/EC on Radio Equip-

ment and Telecommunications Terminal Equip-

ment (R&TTE):

Compliance with the European Directive 1999/5/

EC has been proven by testing according to the

following standards:

EN 300 330-2 V1.3.1: 2006-04

EN 301 489-3 V1-4-1:2002-08

European Directive 2004/108/EC on Electro-

magnetic Compatibility (EMC):

Compliance with the European Directive

2004/108/EC has been proven by testing accord-

ing to the following standards:

EN 50130-4:1995 + A1:1998 + A2:2003

European Directive 2006/95/EC on Low-Voltage

Directive (Safety):

Compliance with the European Directive 2006/95/

EC has been proven by testing according to the

following standard:

EN 60950-1:2006

8 RB500 Installation Guide

ENG

Power supply

Any power supply connected to the RB500 must

conform to CE regulations regarding safety and

EMC.

This includes conformity to SELV (Safety Extra

Low Voltage) according to EN 60950-1.

The supply line fuse shall, independent of host

system, not in any case exceed 10A.

Cable recommendations

The cables between node and reader shall not

exceed 30 m.

RB500 Installation Guide 9

ENG

Technical data

Power supply: 12 -24 V DC

Min. 10,5 V DC

Max. 35V DC

Power consumption RB500-EM:

24V DC: Typ 17 mA (408 mW), Max*): 31 mA (744 mW)

12V DC: Typ 32 mA (384 mW), Max*): 68 mA (816 mW)

*) While horn sounds

Power consumption RB500-Cotag:

24V DC: Typ 23 mA (552 mW), Max*): 40 mA (960 mW)

12V DC: Typ 44 mA (528 mW), Max*): 90 mA (1080 mW)

*) While horn sounds

Frequency range: EM: 125 kHz.

Cotag: 66-132 kHz.

IP Class: IP54

Temperature range: -30° C to +50° C

Dimensions (HxWxD) mm: 140x80x40

If needed, complete the installation with ush mounting

kit BB3.

Reading distances

EM4102 (passive): up to 5 cm

Cotag (passive): up to 5 cm

Cotag (active): up to 10 cm

10 RB500 Installation Guide

ENG

General features

Power Up

Power up will give a rising tone from the Buzzer/

Horn. The factory setting gives that Clock&Data

conguration is selected and will work for the

Bewator 2010 Omnis. See also Preset Congura-

tion (short codes)

Programming Mode

Programming mode is enabled when powering

up the reader with the ‘B’ button pressed for 2

seconds. This is indicated by red and green LEDs

blinking.

Timeout Period

When the reader is in programming mode if no

cards are presented to the reader or short code

keys pressed the reader will automatically time out

and return to normal operation after 60 seconds.

Exit Programming Mode

Programming mode can be cancelled by press-

ing ‘B’ when red and green LEDs are ashing

together.

Inhaltsverzeichnis

Sprachen:

Andere Siemens Kartenleser Handbücher

Siemens

Siemens SC7 Installations- und Betriebshandbuch

Siemens

Siemens PR500-Cotag Bedienungsanleitung

Siemens

Siemens SIMATIC RF650M Bedienungsanleitung

Siemens

Siemens Bewator PR500 Installations- und Betriebshandbuch

Siemens

Siemens AR6181-MX Bedienungs- und Wartungsanleitung

Siemens

Siemens AR4 S-MF Series Installationsanleitung

Siemens

Siemens PM500-Cotag Bedienungsanleitung

Siemens

Siemens SIMATIC RF1070R Bedienungsanleitung

Siemens

Siemens AR10S-MF Installationsanleitung

Siemens

Siemens AR6111-MX Bedienungsanleitung

Siemens

Siemens SIMATIC MV440 Bedienungsanleitung

Siemens

Siemens AR50M-MF Bedienungsanleitung

Siemens

Siemens AR6181-MS Bedienungsanleitung

Siemens

Siemens SIMATIC RF300 Benutzerhandbuch

Siemens

Siemens SIMATIC RF310M Bedienungsanleitung

Siemens

Siemens 6FL7171-8AD Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch