Siemens CZM-4 Bedienungsanleitung

P/N 315-090726-12

OPERATION

The Model CZM-4 Conventional Zone Module from

Siemens Building Technologies, Inc. is used with the

MXL to provide four Class A (Style D) or Class B

(Style B) conventional initiating device circuits. Each

circuit can monitor up to thirty 2-wire photoelectric or

ionization smoke detectors and an unlimited number

of normally open contact devices. Projected beam

and flame detectors, detector relay bases, and

remote indicator lamps may also be used with the

CZM-4.

Activation of any device on the circuit initiates

a zone alarm and causes any previously pro-

grammed functions to operate. Any circuit in

alarm or trouble condition is identified by a user-

specified, 32-character, alphanumeric message

displayed on the MXL LCD annunciator.

The CZM-4 is designed to function in a local de-

grade mode during failure of the MXL main proces-

sor or during the loss of the System communication

network. While in the degrade mode, the CZM-4 can

report both alarm and trouble conditions and can

activate local outputs on other modules within the

same enclosure.

Note: When verification is used on a CZM-4

zone, do not use shorting devices on

that circuit.

Any or all of the CZM-4 circuits may be programmed

to operate with Alarm Verification.

This allows the automatic verification of alarm

conditions caused by smoke detectors in order to

prevent nuisance alarms.

The CZM-4 has five LEDs which indicate alarm,

transmit, trouble, and two user programmable

functions, respectively.

For additional information on the MXL/MXLV

System, refer to the MXL/MXLV Manual, P/N 315-

092036.

INSTALLATION

Remove all system power before installation,

first battery and then AC. (To power up, first

connect the AC and then the battery.)

The CZM-4 module plugs into two half-width slots,

forming one full slot on the MOM-4 (See Figure 1).

As many as two CZM-4 modules may be plugged

into a MOM-4 Card Cage.

Each CZM-4 can be in either the upper or lower

slots of the MOM-4. The position it is in deter-

mines whether the device loops are on TB1 or

TB2 of the MOM-4.

Setting the Address

Before the CZM-4 is installed into the MOM-4,

set the network address on switch S1 (See

Figure 2). Set the address to the one selected in

the CSG-M for this particular CZM-4. Follow the

switch positions in Table 1 on the back to set

the address.

Installation Instructions

Model CZM-4

Conventional Zone Module

Fire Safety

Siemens Building Technologies, Inc.

8 Fernwood Road

Florham Park, New Jersey 07932

Siemens Building Technologies, Ltd.

2 Kenview Boulevard

Brampton, Ontario L6T 5E4 Canada

Mounting the CZM-4

After the address is set, install the CZM-4 into the

MOM-4 module, being sure that the CZM-4 is firmly

seated in the card edge connector.

ELECTRICAL RATINGS

tnerruCeludoMCDV5evitcAAm01

tnerruCeludoMCDV42evitcA Am081+Am54

enozevitcarep

tnerruCeludoMCDV42ybdnatSAm05

Initiating Circuits

Voltage range: 21.7-22.8 V unfiltered

full wave

Supervisory circuit: 4mA max

Alarm current: 180mA per zone max

INITIATING DEVICES

Up to 30 detectors, listed in Table 2 (except the

PBA-1191), may be used on a CZM-4 zone. Manual

fire alarm stations and smoke detectors can be

mixed on zones where local codes allow. Detectors

of different models are not to be mixed or matched

Figure 1

MOM-4 PC Board

2ELBAT

4-MZCROFSROTCETEDELBITAPMOC

rotceteDesaB

noitallatsnI

snoitcurtsnI

rebmuNtraP

*H3/3-IDS3-BD349180-513

*H3A/3A-IDS3-BD349180-513

*H3B/3B-IDPLI

3/I3-DA

I3-AS

432390-513

472690-513

‡*11-TD11-BD

TPDA-BD+S3-BD

924590-513

†1911-ABP1911-BBP424590-513

*T3/3-EP*53-BD

PLI3-DA

PR3-DA

578090-513

432390-513

195680-513

*T11/11-EP11-BD

TPDA-BD+S3-BD

RP11/P11-DA

P11-AS

91490-513

891490-513

956590-513

472690-513

.1911-ABPtubepytynafosrotceted03otpuesuyaM*

.noitacifirevmralahtiwesutonoD‡

.)3erugiFeeS(enozrep1911-AB

PenoylnO†

on a system. Up to five waterflow switches and any

number of direct shorting thermal detectors also may

be used with each zone on the CZM-4. Only one

PBA-1191 may be used on a zone. The model

numbers listed are the UL compatibility identifiers.

Refer to Figure 3. All circuits are power limited to

NFPA 70 per NEC 760. Each detector or group

of detectors must use a 2-wire circuit of at least

18 AWG, thermoplastic fixture wire, enclosed in

conduit. If permitted by local building codes, 18

AWG limited energy, shielded cable without conduit

may also be used.

Total circuit resistance must not exceed 70

ohms—40 ohms if relay bases are used.

NOTES:

1. All circuits can be Class A or Class B.

2. All circuits are power limited per NEC 760.

3. All circuits are supervised.

4. Do not connect more than one PBA-1911 to each zone. (Refer to PBA-1191 Instructions,

P/N 315-095424, for further information.)

5. Do not mix smoke detectors with the PBA-1191.

6. Maximim resistance: 70 ohms/circuit.

7. The PBA-1191 requires Rev. 3 or higher of CZM-4 software.

8. Positive and negative ground fault detected at <20 ohms for terminals 1-16.

Figure 2

CZM-4 PC Board

Figure 3

Wiring Diagram

Refer to Wiring Specification for

MXL, MXL-IQ and MXLV

Systems, P/N 315-091772

revision 6 or higher, for

additional wiring information.

P/N 315-090726-12

TA B L E 1

NETWORK ADDRESS PROGRAMMING

ADDR 87654321 ADDR 87654321 ADDR 87654321 ADDR 87654321

000 ILLEGAL 064 OXOOOOOO 128 XOOOOOOO 192 XXOOOOOO

001 ILLEGAL 065 OXOOOOOX 129 XOOOOOOX 193 XXOOOOOX

002 ILLEGAL 066 OXOOOOXO 130 XOOOOOXO 194 XXOOOOXO

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

018

019

020

021

022

023

024

025

026

027

028

029

030

031

032

033

034

035

036

037

038

039

040

041

042

043

044

045

046

047

048

049

050

051

052

053

054

055

OOOOOOXX

OOOOOXOO

OOOOOXOX

OOOOOXXO

OOOOOXXX

OOOOXOOO

OOOOXOOX

OOOOXOXO

OOOOXOXX

OOOOXXOO

OOOOXXOX

OOOOXXXO

OOOOXXXX

OOOXOOOO

OOOXOOOX

OOOXOOXO

OOOXOOXX

OOOXOXOO

OOOXOXOX

OOOXOXXO

OOOXOXXX

OOOXXOOO

OOOXXOOX

OOOXXOXO

OOOXXOXX

OOOXXXOO

OOOXXXOX

OOOXXXXO

OOOXXXXX

OOXOOOOO

OOXOOOOX

OOXOOOXO

OOXOOOXX

OOXOOXOO

OOXOOXOX

OOXOOXXO

OOXOOXXX

OOXOXOOO

OOXOXOOX

OOXOXOXO

OOXOXOXX

OOXOXXOO

OOXOXXOX

OOXOXXXO

OOXOXXXX

OOXXOOOO

OOXXOOOX

OOXXOOXO

OOXXOOXX

OOXXOXOO

OOXXOXOX

OOXXOXXO

OOXXOXXX

067

068

069

070

071

072

073

074

075

076

077

078

079

080

081

082

083

084

085

086

087

088

089

090

091

092

093

094

095

096

097

098

099

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

OXOOOOXX

OXOOOXOO

OXOOOXOX

OXOOOXXO

OXOOOXXX

OXOOXOOO

OXOOXOOX

OXOOXOXO

OXOOXOXX

OXOOXXOO

OXOOXXOX

OXOOXXXO

OXOOXXXX

OXOXOOOO

OXOXOOOX

OXOXOOXO

OXOXOOXX

OXOXOXOO

OXOXOXOX

OXOXOXXO

OXOXOXXX

OXOXXOOO

OXOXXOOX

OXOXXOXO

OXOXXOXX

OXOXXXOO

OXOXXXOX

OXOXXXXO

OXOXXXXX

OXXOOOOO

OXXOOOOX

OXXOOOXO

OXXOOOXX

OXXOOXOO

OXXOOXOX

OXXOOXXO

OXXOOXXX

OXXOXOOO

OXXOXOOX

OXXOXOXO

OXXOXOXX

OXXOXXOO

OXXOXXOX

OXXOXXXO

OXXOXXXX

OXXXOOOO

OXXXOOOX

OXXXOOXO

OXXXOOXX

OXXXOXOO

OXXXOXOX

OXXXOXXO

OXXXOXXX

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

XOOOOOXX

XOOOOXOO

XOOOOXOX

XOOOOXXO

XOOOOXXX

XOOOXOOO

XOOOXOOX

XOOOXOXO

XOOOXOXX

XOOOXXOO

XOOOXXOX

XOOOXXXO

XOOOXXXX

XOOXOOOO

XOOXOOOX

XOOXOOXO

XOOXOOXX

XOOXOXOO

XOOXOXOX

XOOXOXXO

XOOXOXXX

XOOXXOOO

XOOXXOOX

XOOXXOXO

XOOXXOXX

XOOXXXOO

XOOXXXOX

XOOXXXXO

XOOXXXXX

XOXOOOOO

XOXOOOOX

XOXOOOXO

XOXOOOXX

XOXOOXOO

XOXOOXOX

XOXOOXXO

XOXOOXXX

XOXOXOOO

XOXOXOOX

XOXOXOXO

XOXOXOXX

XOXOXXOO

XOXOXXOX

XOXOXXXO

XOXOXXXX

XOXXOOOO

XOXXOOOX

XOXXOOXO

XOXXOOXX

XOXXOXOO

XOXXOXOX

XOXXOXXO

XOXXOXXX

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

XXOOOOXX

XXOOOXOO

XXOOOXOX

XXOOOXXO

XXOOOXXX

XXOOXOOO

XXOOXOOX

XXOOXOXO

XXOOXOXX

XXOOXXOO

XXOOXXOX

XXOOXXXO

XXOOXXXX

XXOXOOOO

XXOXOOOX

XXOXOOXO

XXOXOOXX

XXOXOXOO

XXOXOXOX

XXOXOXXO

XXOXOXXX

XXOXXOOO

XXOXXOOX

XXOXXOXO

XXOXXOXX

XXOXXXOO

XXOXXXOX

XXOXXXXO

XXOXXXXX

XXXOOOOO

XXXOOOOX

XXXOOOXO

XXXOOOXX

XXXOOXOO

XXXOOXOX

XXXOOXXO

XXXOOXXX

XXXOXOOO

XXXOXOOX

XXXOXOXO

XXXOXOXX

XXXOXXOO

XXXOXXOX

XXXOXXXO

XXXOXXXX

XXXXOOOO

XXXXOOOX

XXXXOOXO

XXXXOOXX

XXXXOXOO

XXXXOXOX

XXXXOXXO

XXXXOXXX

056 OOXXXOOO 120 OXXXXOOO 184 XOXXXOOO 248 ILLEGAL

057 OOXXXOOX 121 OXXXXOOX 185 XOXXXOOX 249 ILLEGAL

058 OOXXXOXO 122 OXXXXOXO 186 XOXXXOXO 250 ILLEGAL

059 OOXXXOXX 123 OXXXXOXX 187 XOXXXOXX 251 ILLEGAL

060 OOXXXXOO 124 OXXXXXOO 188 XOXXXXOO 252 ILLEGAL

061 OOXXXXOX 125 OXXXXXOX 189 XOXXXXOX 253 ILLEGAL

062 OOXXXXXO 126 OXXXXXXO 190 XOXXXXXO 254 ILLEGAL

063 OOXXXXXX 127 OXXXXXXX 191 XOXXXXXX 255 ILLEGAL

O = OPEN (or OFF) X = CLOSED ( or ON)

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens FCA2018-U1 Bedienungsanleitung

Siemens

Siemens K60 F Series Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens AZL2 Series Bedienungsanleitung

Siemens

Siemens RUGGEDCOM ROS Bedienungsanleitung

Siemens

Siemens SINUMERIK 828D Turning Bedienungsanleitung

Siemens

Siemens GAMMA instabus Touch control TC5 Bedienungsanleitung

Siemens

Siemens SENTRON PAC RS485 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA2712 Technisches Dokument

Siemens

Siemens SIMATIC TI505 386/ATM Bedienungsanleitung

Siemens

Siemens 4AI I 4WIRE HART Handbuch

Siemens

Siemens MPS-6 Bedienungsanleitung

Siemens

Siemens ASIsafe SIRIUS 3RK1205-0B.00-0AA2 Bedienungsanleitung

Siemens

Siemens CU240S DP-F Bedienungsanleitung

Siemens

Siemens VAG61 Series Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW44 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RS400 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIRIUS ACT 3SU1400-2EM10-6AA0 Bedienungsanleitung

Siemens

Siemens Simatic Net Scalance M812 Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens ZAM-180 Bedienungsanleitung

Siemens

Siemens SIJECT 16i Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung