Siemens SIPROTEC 5 Bedienungs- und Montageanleitung

Technical Data

Extract from manual C53000-G5040-C002-F, chapter 6

Smart Infrastructure

SIPROTEC 5 V7.90 and higher

Hardware

Cover_TD_C002_enUS.fm Page 1 Monday, June 17, 2019 12:16 PM

NOTE

For your own safety, observe the warnings and safety instructions contained in this document, if available.

Disclaimer of Liability

Subject to changes and errors. The information given in

this document only contains general descriptions and/or

performance features which may not always specifically

reflect those described, or which may undergo modifica-

tion in the course of further development of the products.

The requested performance features are binding only when

they are expressly agreed upon in the concluded contract.

Document version: C53000-G5040-C002-F.05

Edition: 06.2019

Version of the product described: V7.90 and higher

The disclosure, duplication, distribution and editing of this

document, or utilization and communication of the content

are not permitted, unless authorized in writing. All rights,

including rights created by patent grant or registration of a

utility model or a design, are reserved.

Trademarks

SIPROTEC™, DIGSI™, SIGRA™, SIGUARD™, SAFIR™, SICAM™,

and MindSphere™ are trademarks of Siemens AG. Any

unauthorized use is prohibited. All other designations in

this document may represent trademarks whose use by

third parties for their own purposes may violate the propri-

etary rights of the owner.

Preface

Purpose of the Manual

This manual describes the hardware of the SIPROTEC 5 device family and provides general information on the

product structure, the modules and technical data.

Target Audience

Protection system engineers, commissioning engineers, persons entrusted with the setting, testing and main-

tenance of automation, selective protection and control equipment, and operational crew in electrical installa-

tions and power plants.

Scope

This manual applies to the SIPROTEC 5 device family.

Further Documentation

[dwprefhw-221012-01.tif, 3, en_US]

•Device manuals

Each Device manual describes the functions and applications of a specific SIPROTEC 5 device. The printed

manual and the online help for the device have the same informational structure.

•Hardware manual

The Hardware manual describes the hardware building blocks and device combinations of the SIPROTEC 5

device family.

•Operating manual

The Operating manual describes the basic principles and procedures for operating and assembling the

devices of the SIPROTEC 5 range.

SIPROTEC 5, Hardware Description, Manual 3

C53000-G5040-C002-F, Edition 06.2019

•Communication protocol manual

The Communication protocol manual contains a description of the protocols for communication within

the SIPROTEC 5 device family and to higher-level network control centers.

•Product information

The Product information includes general information about device installation, technical data, limiting

values for input and output modules, and conditions when preparing for operation. This document is

provided with each SIPROTEC 5 device.

•Engineering Guide

The Engineering Guide describes the essential steps when engineering with DIGSI 5. In addition, the Engi-

neering Guide shows you how to load a planned configuration to a SIPROTEC 5 device and update the

functionality of the SIPROTEC 5 device.

•DIGSI 5 online help

The DIGSI 5 online help contains a help package for DIGSI 5 and CFC.

The help package for DIGSI 5 includes a description of the basic operation of software, the DIGSI princi-

ples and editors. The help package for CFC includes an introduction to CFC programming, basic examples

of working with CFC, and a reference chapter with all the CFC blocks available for the SIPROTEC 5 range.

•SIPROTEC 5/DIGSI 5 Tutorial

The tutorial on the DVD contains brief information about important product features, more detailed infor-

mation about the individual technical areas, as well as operating sequences with tasks based on practical

operation and a brief explanation.

•SIPROTEC 5 catalog

The SIPROTEC 5 catalog describes the system features and the devices of SIPROTEC 5.

•Selection guide for SIPROTEC and Reyrolle

The selection guide offers an overview of the device series of the Siemens protection devices, and a

device selection table.

Indication of Conformity

This product complies with the directive of the Council of the European Communities

on harmonization of the laws of the Member States concerning electromagnetic

compatibility (EMC Directive 2014/30/EU), restriction on usage of hazardous

substances in electrical and electronic equipment (RoHS Directive 2011/65/EU), and

electrical equipment for use within specified voltage limits (Low Voltage Directive

2014/35/EU).

This conformity has been proved by tests performed according to the Council Directive

in accordance with the product standard EN 60255-26 (for EMC directive), the standard

EN 50581 (for RoHS directive), and with the product standard EN 60255-27 (for Low

Voltage Directive) by Siemens.

The device is designed and manufactured for application in an industrial environment.

The product conforms with the international standards of IEC 60255 and the German

standard VDE 0435.

Standards

IEEE Std C 37.90

The technical data of the product is approved in accordance with UL.

For more information about the UL database, see ul.com

You can find the product with the UL File Number E194016.

IND. CONT. EQ.

69CA

Preface

4 SIPROTEC 5, Hardware Description, Manual

C53000-G5040-C002-F, Edition 06.2019

Additional Support

For questions about the system, please contact your Siemens sales partner.

Support

Our Customer Support Center provides a 24-hour service.

Siemens AG

Customer Support Center

Humboldtstrasse 59

90459 Nuremberg

Germany

E-mail: [email protected]

Training Courses

Inquiries regarding individual training courses should be addressed to our Training Center:

Siemens AG Phone: +49 (911) 433-7415

Siemens Power Academy TD Fax: +49 (911) 433-7929

Humboldtstrasse 59 E-mail: [email protected]

90459 Nuremberg Internet: www.siemens.com/poweracademy

Germany

Notes on Safety

This document is not a complete index of all safety measures required for operation of the equipment (module

or device). However, it comprises important information that must be followed for personal safety, as well as

to avoid material damage. Information is highlighted and illustrated as follows according to the degree of

danger:

DANGER

DANGER means that death or severe injury will result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

WARNING

WARNING means that death or severe injury may result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

CAUTION

CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.

²Comply with all instructions, in order to avoid moderate or minor injuries.

Preface

SIPROTEC 5, Hardware Description, Manual 5

C53000-G5040-C002-F, Edition 06.2019

NOTICE

NOTICE means that property damage can result if the measures specified are not taken.

²Comply with all instructions, in order to avoid property damage.

NOTE

Important information about the product, product handling or a certain section of the documentation

which must be given particular attention.

Qualified Electrical Engineering Personnel

Only qualified electrical engineering personnel may commission and operate the equipment (module, device)

described in this document. Qualified electrical engineering personnel in the sense of this manual are people

who can demonstrate technical qualifications as electrical technicians. These persons may commission,

isolate, ground and label devices, systems and circuits according to the standards of safety engineering.

Proper Use

The equipment (device, module) may be used only for such applications as set out in the catalogs and the

technical description, and only in combination with third-party equipment recommended and approved by

Siemens.

Problem-free and safe operation of the product depends on the following:

•Proper transport

•Proper storage, setup and installation

•Proper operation and maintenance

When electrical equipment is operated, hazardous voltages are inevitably present in certain parts. If proper

action is not taken, death, severe injury or property damage can result:

•The equipment must be grounded at the grounding terminal before any connections are made.

•All circuit components connected to the power supply may be subject to dangerous voltage.

•Hazardous voltages may be present in equipment even after the supply voltage has been disconnected

(capacitors can still be charged).

•Operation of equipment with exposed current-transformer circuits is prohibited. Before disconnecting the

equipment, ensure that the current-transformer circuits are short-circuited.

•The limiting values stated in the document must not be exceeded. This must also be considered during

testing and commissioning.

Used Symbols on Device

No. Symbol Description

1 Direct current, IEC 60417-5031

2 Alternating current, IEC 60417-5032

3 Direct and alternating current, IEC 60417-5033

4 Earth (ground) terminal, IEC 60417-5017

5 Protective conductor terminal, IEC 60417-5019

Preface

6 SIPROTEC 5, Hardware Description, Manual

C53000-G5040-C002-F, Edition 06.2019

No. Symbol Description

6 Caution, risk of electric shock

7 Caution, risk of danger, ISO 7000-0434

8 Protective Insulation, IEC 60417-5172, Safety Class II devices

9 Guideline 2002/96/EC for electrical and electronic devices

10 Guideline for the Eurasian Market

Preface

SIPROTEC 5, Hardware Description, Manual 7

C53000-G5040-C002-F, Edition 06.2019

Open Source Software

The product contains, among other things, Open Source Software developed by third parties. The Open

Source Software used in the product and the license agreements concerning this software can be found in the

Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those

license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the

event of conflicts between Siemens license conditions and the Open Source Software license conditions, the

Open Source Software conditions shall prevail with respect to the Open Source Software portions of the soft-

ware. The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software

License Conditions provide for it you can order the source code of the Open Source Software from your

Siemens sales contact - against payment of the shipping and handling charges - for a period of at least 3 years

since purchase of the Product. We are liable for the Product including the Open Source Software contained in

it pursuant to the license conditions applicable to the Product. Any liability for the Open Source Software

beyond the program flow intended for the Product is explicitly excluded. Furthermore any liability for defects

resulting from modifications to the Open Source Software by you or third parties is excluded. We do not

provide any technical support for the Product if it has been modified.

When using DIGSI 5 in online mode, you are provided with the option to go to the main menu Show open

source software information and read and display the Readme_OSS file containing the original license text

and copyright information.

To do this, the following steps are necessary:

•Switch to online mode.

•Select the device.

•Select Online in the menu bar.

•Click Show open source software information.

NOTE

To read the Readme_OSS file, a PDF viewer must be installed on the computer.

In order to operate SIPROTEC 5 devices, a valid DIGSI 5 license is required.

SIPROTEC 5, Hardware Description, Manual 9

C53000-G5040-C002-F, Edition 06.2019

Technical Data

6.1 Analog Inputs 206

6.2 Supply Voltage 209

6.3 Binary Inputs 211

6.4 Relay Outputs 213

6.5 Light-Emitting Diodes in the On-Site Operation Panel 216

6.6 Communication Interfaces 217

6.7 Electrical Tests 220

6.8 Mechanical Tests 223

6.9 Environmental Conditions 224

6.10 Operating Conditions 226

6.11 Reference Conditions and Influencing Variables 227

6.12 Approvals 228

6.13 Design Data 229

6.14 Assembly Dimensions 232

6.15 Modular Device Name Plate 253

6.16 Name Plate of Non-Modular Devices (7xx81, 7xx82) 254

6.17 Name Plate, UL Approval, Base Module and 1/3 Base Module 255

6.18 Name Plate, UL Approval, Expansion Module 256

6.19 Battery 257

6.20 SDHC Memory Card 258

6.21 Display Resolution 259

SIPROTEC 5, Hardware Description, Manual 205

C53000-G5040-C002-F, Edition 06.2019

Analog Inputs

Current Inputs

All current, voltage, and power data are specified as RMS values.

Rated frequency frated 50 Hz, 60 Hz

16.7 Hz (for rail protection devices only)

Protection-class current trans-

formers

Rated current Irated Measuring range of

the modular devices

Measuring range of the

non-modular devices

5 A

1 A

0 A to 500 A

0 A to 100 A

0 A to 250 A

0 A to 50 A

Instrument transformers 5 A

1 A

0 A to 8 A

0 A to 1.6 A

0 A to 8 A

0 A to 1.6 A

Burden for rated current Approx. 0.1 VA

Thermal rating

(protection and instrument trans-

formers)

20 A continuously

25 A for 3 min

30 A for 2 min

150 A for 10 s

500 A for 1 s

Dynamic load-carrying capacity 1250 A one half wave

Voltage Input

All current, voltage, and power data are specified as RMS values.

Rated frequency frated 50 Hz, 60 Hz

16.7 Hz (for rail devices only)

Input and output modules IO102, IO202, IO208, IO211,

IO214

IO215

Measuring range 0 V to 200 V 0 V to 7.07 V

Burden < 0.1 VA < 0.01 VA

Thermal rating 230 V continuously 20 V continuously

NOTE

You can find more information on the technical data of the current and voltage transformers in the

SIPROTEC 5 Device manuals in the Technical Data chapter.

Measuring-Transducer Inputs (via Module ANAI-CA-4EL)

Insulation class SELV (Safety Extra Low Voltage) (according to IEC 60255-27)

Connector type 8-pin terminal spring

Differential current input channels 4

Measuring range DC -25.6 mA to +25.6 mA

Fault < 0.5 % of the measuring range

Input impedance 140 Ω

Conversion principle Delta-sigma (16 bit)

Permissible potential difference

between channels

DC 20 V

Galvanic separation from ground/

housing

DC 700 V

Permissible overload DC 100 mA continuously

6.1

Technical Data

6.1 Analog Inputs

206 SIPROTEC 5, Hardware Description, Manual

C53000-G5040-C002-F, Edition 06.2019

Andere Handbücher für SIPROTEC 5

Andere Siemens Controller Handbücher

Siemens

Siemens SKB32 Series Bedienungsanleitung

Siemens

Siemens Synco 200 Bedienungsanleitung

Siemens

Siemens SINUMERIK 828D Turning Kurzanleitung

Siemens

Siemens S7-1200 TELECONTROL Bedienungsanleitung

Siemens

Siemens Micromaster Profibus Bedienungsanleitung

Siemens

Siemens Flowrite 599 Series Betriebsanleitung

Siemens

Siemens ATC5300 Montageanleitung

Siemens

Siemens AP 118 Bedienungsanleitung

Siemens

Siemens ECOFAST 3RK1323 Series Bedienungsanleitung

Siemens

Siemens SIMATIC S7-200 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens ACVATIX G B111.9E/KN Series Bedienungsanleitung

Siemens

Siemens Simatic S7-1500R Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens GDB 9E Series Bedienungsanleitung

Siemens

Siemens GPC 1A Series Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Benutzerhandbuch

Siemens

Siemens SITRANS I100 7NG4124-0AA00 Bedienungsanleitung

Siemens

Siemens SQD Series Bedienungsanleitung

Siemens

Siemens Moore 353 Bedienungsanleitung

Siemens

Siemens RVD230 Bedienerhandbuch

Siemens

Siemens GEB-1E Series Bedienungsanleitung

Siemens

Siemens MO310 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung