Siemens CLIMATIX C400 Bedienungsanleitung

1 | P u s l a p i s

SIEMENS CLIMATIX

Dry Cooler manual

C400 –POL468.65/STD

2 | P u s l a p i s

SIEMENS CLIMATIX

Table of contents

1Display.........................................................................................................................................................................3

1.1 POL871.72/STD ................................................................................................................................................3

1.1.1 Connecting to user profile ........................................................................................................................3

1.1.2 Connecting to service profile ...................................................................................................................4

1.1.3 Alarm list .....................................................................................................................................................5

1.2 Web service access..........................................................................................................................................5

2Control logic................................................................................................................................................................8

2.1 Turning on system.............................................................................................................................................8

2.2 Dry cooler control (Dry Cooler control)...........................................................................................................8

3Communications........................................................................................................................................................9

3 | P u s l a p i s

SIEMENS CLIMATIX

1 Display

1.1 POL871.72/STD

Pic 1. POL871.72/STD

1.1.1 Connecting to user profile

Connect to “User“ profile. Hold “Enter“ button for 3 seconds.

Pic. 2 Button placement

After 3 seconds screen changes to Pic. 3.

4 | P u s l a p i s

SIEMENS CLIMATIX

Pic. 3 Login screen

User password is 1000 and it can be entered by “Up” and “Down” buttons and confirm selection

press „Enter“. When correct password is entered in the right corner one key icon will be showed.

On User Level user can change “Setpoint” and turn on/off machine from display in line

“Display/Comm:

1.1.2 Connecting to service profile

Connect to “Service” profile. Hold “Enter” button for 3 seconds.

Pic. 4 Button placement

After 3 seconds screen changes to Pic. 5.

5 | P u s l a p i s

SIEMENS CLIMATIX

Pic. 5 Login screen

User password is 2000 and it can be entered by “Up” and “Down” buttons and confirm selection

press „Enter“. When correct password is entered in the right corner two key icon will be showed.

In service level parameters for regulation and alarms can be changed.

1.1.3 Alarm list

AL01

Fan overload

AL02

DryCoolerIn Temp. sensor fault

AL03

DryCoolerOut Temp. sensor fault

AL04

Fault Supply pump (Single pump)/ Fault Supply pump 1 (Twin

pump)

AL05

Fault Flow Detector (Single pump)

AL06

Fault Supply pump 2 (Twin pump)

AL07

Fault Flow Detector (Twin pump)

AL08

Outside temp. sensor fault

AL09

Fault Adiabatic pump

AL10

Fault flow switch adiabatic pump

Most recent alarm will be showed on HMILED. Alarm history can be reached by Hold “SET” key for

5s then screen will change and show “PL” press “UP” key and it changes to ALH and alarm history

is showed.

1.2 Web service access

For reaching internet access find IP:

POL871.72/STD Main menu->System->Communications

Enter found IP address to browser and should see Authentication required window:

6 | P u s l a p i s

SIEMENS CLIMATIX

Pic. 7 Authentication required

Enter user name and password:

User name: WEB

Password: SBTAdmin!

When entered correctly user should see:

Pic. 8 Web server pin

Enter user or service Pin for required access level.

7 | P u s l a p i s

SIEMENS CLIMATIX

Pic. 9 Web server

8 | P u s l a p i s

SIEMENS CLIMATIX

2 Control logic

2.1 Turning on system

System starts to work then Main switch On/Off and Display/Comm On/Off both is in ON state.

2.2 Dry cooler control (Dry Cooler control)

Fan speed is regulated by output temperature of glycol. If temperature is closer to setpoint fan power is

increased.

Example. Setpoint = 20 °C, Dif = 5 °C. glycol temp. 15 °C fan power 0%, glycol temp. 17.5 °fan power 50%,

glycol temp. 20 °C fan power 100%.

9 | P u s l a p i s

SIEMENS CLIMATIX

3 Communications

Possible communications:

Modbus RTU by default: Baud rate 19200 , Parity EVEN, Stop bits 1, Word length 8 bit.

Modbus TCP/IP port: 502.

Modbus list parameters:

Parameters

Address

Read/Write

Gain

Mode

Main switch Off/On

Read

Display/Comm. Off/On

Read

Setpoint

Read/Write

Dif

H10

Read/Write

Fan

DryCooler temp.IN value

H100

Read

0.1

DryCooler temp.OUT value

H102

Read

0.1

DryCooler temp.OUT alarm

H104

Read

Fan overload

H106

Read

Fan output 0-100%

H108

Read

Fan work hours

H118

Read

Pump

Supply pump (Single) Status

H200

Read

Supply pump 1 (Twin) Status

H202

Read

Supply pump 2 (Twin) Status

H204

Read

Supply pump (Single) / Supply pump 1 (Twin) overload

H206

Read

Supply pump 2 (Twin) overload

H208

Read

Flow det. status (single pump)

H210

Read

Flow det. alarm (single pump)

H212

Read

Supply pump (Single) Work hours

H214

Read

Supply pump 1 (Twin) Work hours

H216

Read

Supply pump 2 (Twin) Work hours

H218

Read

Adiabatic pump Status

H220

Read

Adiabatic pump work hours

H222

Read

Adiabatic pump overload

H224

Read

Flow det. status adiabatic pump

H226

Read

Flow det. alarm adiabatic pump

H228

Read

Valve

Valve output 0-100

H300

Read

Valve drain status

H302

Read

Valve supply status

H304

Read

Common

Alarm output

H400

Read

Outside temp.

H402

Read

0.1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SINUMERIK 828D Turning Bedienungsanleitung

Siemens

Siemens SSA911.02ZB Bedienungsanleitung

Siemens

Siemens SIMATIC IPC427C Bedienungsanleitung

Siemens

Siemens Synco 700 Bedienerhandbuch

Siemens

Siemens SIMATIC S5-95F Bedienungsanleitung

Siemens

Siemens FC18 Series Bedienungsanleitung

Siemens

Siemens PolyCool CPS 40 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens SSB161.05UT Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Siemens

Siemens DELTA i-system Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens SIRIUS M200D Bedienungsanleitung

Siemens

Siemens SAS61.03U Bedienungsanleitung

Siemens

Siemens RMH760 Bedienungsanleitung

Siemens

Siemens LMV51 Series Bedienerhandbuch

Siemens

Siemens Powermite 599 Series Betriebsanleitung

Siemens

Siemens OpenAir GQD Series Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens Synco 700 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIRIUS ET 200S Bedienungsanleitung

Siemens

Siemens DXR2.E10PL-102BK Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung