Siemens GIGASET C88 Bedienungsanleitung

Gigaset

C88

Be inspired

User Manual

HW D CD 8516 P/T S

Congratulations

Congratulations on your purchase of the Siemens Gigaset C88 telephone system!

This phones 2.4 GHz frequency and high-speed digital voice encoding provide re-

ception and voice clarity that is superior to other cordless phones. And, its digital

spread spectrum technology will provide you with secure, private conversations.

General

Quick reference

Handset

Turn handset on/off

(see page 10) Hold down a

Turn keypad protection on/off

(see page 10) Hold down ª

Turn tones on/off Hold down «

Make an external call

(see page 15) oc

Redial a number

(see page 17) If applicable, select an entryc

Copy telephone number

to the Directory (see page 17)

Dial from the Directory

(see page 18) ho[Name] and/or c

Dial from the Call Log

(see page 24) If necessary c

Set the handset volume

(see page 31)

Make an internal call

(see page 15) For example: ^or c

Call all handsets

(see page 15) «or c

Transfer call to another

handset (see page 29) For example: Ÿa

Consultation Calls

(see page 29) For example: Ÿ; End:

Set the date (see page 11)

Set the time

(see page 11)

Set the alarm clock

(see page 13)

Enter the time

Backspace

(see page 36)

RDL YZ

MENU SEND TO DIR OK

JZC LOG OK Z

MENU ZHS SETT OK H/SET VOL OK

YOK

INT INT Y

INT INT INT ALL

INT

INT MENU EXIT OK

MENU ZBASE SETT OK ZCLOCK OK

DATE OK

MENU ZBASE SETT OK ZCLOCK OK

ZTIME OK

MENU ALARM CLOCK OK OK

General

Handset Diagram

Display and Soft keys

123

ABC DEF

456

JKL MNOGHI

789

TUV

WXYZ

PQRS

TALK

END

OPER

MEM

Flash key

Pause

(hold key down)

Star key

Hold down to

on/off

the ringer

Display

Pound key

Hold down to on/off key-

pad protection

Ta l k k ey

- answer a call

- dial a telephone number

Key 1 (programmable)

Hold down to select the

Telco mailbox

Current display and

soft keys

see below

End key and

On/Off key

- end the call

- cancel function

- one menu level back

(press briefly)

- Return to idle state

(hold down)

- when the telephone is

idle on/off (hold down)

Memory key

Directory key

Open the directory

Charging status

INT

MENUMENU

30 AM

LED

lights up during a call;

flashes at:

- incoming calls

- new messages

- alarm call

Headset jack

Microphone

RDL

INT

MENUMENU

30 AM

TALK

END

Time

Internal telephone

no. of the handset

Charging status

Alarm clock on signal

(if alarm has

been set)

In the display:

current functions

Ýbattery empty

Úbattery fully charged

flashing: battery low

Soft keys:

Press the correspond-

ing keys to initiate the

function shown in the

display.

RDL

General

Display symbols

Automatic redial

key:

Opens the list

with the last five

telephone num-

bers dialed.

Mailbox icon:

Opens the messages/

entries in the Call Log/

Telco voice mail.

There are new messag-

es if the icon flashes.

Intercom key:

Call other regis-

tered handsets.

Menu key:

To access menu

(when the tele-

phone is idle or

during a call).

RDL JINT MENU

Scroll through the menu by pressing

the soft key directly below the symbol.

Confirm the function selected.

End and save the setting.

Y Z OK

INT

MENUMENU

30 AM

OKOK

ALARM CLOCK

RDL

30 AM

MENUMENU

Scroll to the left and right

when entering numbers or messages.

Delete key (Backspace):

Delete input from right to left.

< >

Then:

Press abriefly: 1 menu level up

Hold down a: Return to the idle state

No input: Automatically return to the idle state

Gigaset 4010 Classic, CHIN, A31008-G4010-C101-2-7619 4010 BookTOC.fm 29.01.03

Table of Contents

Installing the Telephone System .............................. 6

Date and Time ........................................................ 11

Making Calls ........................................................... 15

Enhanced Telephone Features ............................... 17

Handset Operation ................................................. 26

Individual Handset Settings ................................... 31

Base Station Settings ............................................. 33

Connecting the Base Station to a PBX ................... 34

Appendix ................................................................ 36

Troubleshooting ..................................................... 37

Safety Precautions ................................................. 38

Press Keys:

Installing the Telephone System

Installing the Telephone

System

The package contains the following:

• 1 Gigaset C88 base station

• 1 Gigaset C88 handset

• 1 power supply unit

• 1 telephone cord

• 1 belt clip

• 2 AA rechargeable NiCd batteries

• 1 User Manual

• 1 Quick Start Guide

Installing the Base Station

The base station is designed for operation in pro-

tected rooms with a temperature range from 0°F to

+45°F.

Important: For best reception, place the

base in a high central location, away from oth-

er electrical devices.

45°F

0°F

Installing the Telephone System

Connecting the Base Station

• Only use the power supply unit included as indicated on the underside of

the base.

• Use the telephone cord supplied. Do not use any old cords.

• Do not use an outlet controlled by a wall switch.

Power supply unit

(220 V / 50 Hz

with cord )

• Insert the

small plug on

cord into

phone jack

• Place cord in

the base cable

channel

• insert power

supply unit

into wall outlet

Telephone jack and tele-

phone cord

Key to register

additional

handsets/Page

handsets.

• Insert plug on the telephone cord into telephone jack on base unit (clicks

into place)

• Place cord in cable channel on the bottom of the base

• Insert other end of plug into telephone jack on the wall

Press Keys:

Installing the Telephone System

Setting Up the Handset

Remove the protective plastic film

from display.

Inserting the batteries

• Insert the batteries, as shown above.

• Place cover and push gently upward until it clicks

into place (the unit is shipped with the battery

cover off).

• To open, press the grooved area on the cover and

slide back.

Placing the Handset into the Base Station

and Charging the Batteries

Before using your handset, place it in the base sta-

tion with the display facing upward. After about one

minute, the handset's internal number is shown in

upper left hand corner of display (for example, “1”).

Note:

Your Gigaset is now ready for operation. Please set

date and the time (see page 11), so that the time of

incoming calls can be noted correctly.

• Use only “AA” rechargeable NiCd or NiMH

batteries. Do not use Alkaline, Lithium or

non-rechargeable batteries.

• Never use non-Siemens charging units as

these could damage the batteries and

phone.

For information on how to register additional

handsets (bought separately), see page 27.

–

–+

–

Inhaltsverzeichnis

Andere Siemens Schnurloses Telefon Handbücher

Siemens

Siemens Gigaset A 110 Bedienungsanleitung

Siemens

Siemens Gigaset A200 Bedienungsanleitung

Siemens

Siemens Gigaset 4210 Bedienungsanleitung

Siemens

Siemens Gigaset E455 Bedienungsanleitung

Siemens

Siemens Gigaset 2410 Bedienungsanleitung

Siemens

Siemens HICOM CORDLESS EM 300 COMFORT Bedienungsanleitung

Siemens

Siemens Gigaset S790 Bedienungsanleitung

Siemens

Siemens Gigaset SL400H Bedienungsanleitung

Siemens

Siemens Gigaset E1 Bedienungsanleitung

Siemens

Siemens CT200 Bedienungsanleitung

Siemens

Siemens Gigaset A370 Bedienungsanleitung

Siemens

Siemens Gigaset E450 SIM Bedienungsanleitung

Siemens

Siemens Gigaset C1 Bedienungsanleitung

Siemens

Siemens Gigaset 5675 Bedienungsanleitung

Siemens

Siemens Gigaset SL1 professional Bedienungsanleitung

Siemens

Siemens 300 Series Bedienungsanleitung

Siemens

Siemens Gigaset E450 Bedienungsanleitung

Siemens

Siemens Gigaset S79H Bedienungsanleitung

Siemens

Siemens Model 240 Bedienungsanleitung

Siemens

Siemens Gigaset 4015 Classic Bedienungsanleitung

Siemens

Siemens Gigaset S450 IP Bedienungsanleitung

Siemens

Siemens GIGASET C470 IP Bedienungsanleitung

Siemens

Siemens pocket 2011 Tango Bedienungsanleitung

Siemens

Siemens Gigaset C380 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung