Siemens SIMATIC ET 200S Bedienungsanleitung

Preface

Properties

SIMATIC

ET 200S distributed I/O

Terminal modules

Manual

04/2007

A5E01120034-01

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

WARNING

This device may only be used for the applications described in the catalog or the technical description and only

in connection with devices or components from other manufacturers which have been approved or

recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage,

positioning and assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90327 NÜRNBERG

GERMANY

Ordernumber: A5E01120034-01

Ⓟ 09/2007

Technical data subject to change

Terminal modules

Manual, 04/2007, A5E01120034-01 3

Preface

Purpose of the manual

This manual supplements the

ET 200S Distributed I/O System

Operating Instructions.

General functions for the ET 200S are described in the

ET 200S Distributed I/O System

Operating Instructions.

The information in this document along with the operating instructions enables you to

commission the ET 200S.

Basic knowledge requirements

To understand these operating instructions you should have general knowledge of

automation engineering.

Scope of the manual

This manual applies to this ET 200S module. It describes the components that are valid at

the time of publication.

Recycling and disposal

Thanks to the fact that it is low in contaminants, this ET 200S module is recyclable. For

environmentally compliant recycling and disposal of your electronic waste, please contact a

company certified for the disposal of electronic waste.

Additional support

If you have any questions relating to the products described in these operating instructions,

and do not find the answers in this document, please contact your local Siemens

representative.

http://www.siemens.com/automation/partner

The portal to our technical documentation for the various SIMATIC products and systems is

available at:

http://www.siemens.com/automation/simatic/portal

The online catalog and ordering system are available at:

http://www.siemens.com/automation/mall

Preface

Terminal modules

4 Manual, 04/2007, A5E01120034-01

Training center

We offer courses to help you get started with the ET 200S and the SIMATIC S7 automation

system. Please contact your regional training center or the central training center in D -

90327, Nuremberg, Germany.

Phone: +49 (911) 895-3200.

http://www.siemens.com/sitrain

Technical Support

You can reach technical support for all A&D projects

● using the support request web form:

http://www.siemens.com/automation/support-request

● Phone: + 49 180 5050 222

● Fax: + 49 180 5050 223

For more information about our technical support, refer to our Web site at

http://www.siemens.de/automation/service

Service & Support on the Internet

In addition to our documentation services, you can also make use of our comprehensive

online knowledge base on the Internet.

http://www.siemens.com/automation/service&support

There you will find:

● Our Newsletter, which constantly provides you with the latest information about your

products.

● The right documentation for you using our Service & Support search engine.

● The bulletin board, a worldwide knowledge exchange for users and experts.

● Your local contact for Automation & Drives in our contact database.

● Information about on-site services, repairs, spare parts. Lots more can be found on our

"Services" pages.

Terminal modules

Manual, 04/2007, A5E01120034-01 5

Table of contents

Preface ...................................................................................................................................................... 3

1 Properties .................................................................................................................................................. 7

1.1 Function of terminal modules.........................................................................................................7

1.2 Terminal module TM-P15x23-A1 (6ES7193-4CCx0-0AA0) ..........................................................8

1.3 Terminal module TM-P15x23-A0 (6ES7193-4CDx0-0AA0) ........................................................10

1.4 Terminal module TM-P15x22-01 (6ES7193-4CEx0-0AA0).........................................................12

1.5 Terminal module TM-P30x44-A0 (6ES7193-4CKx0-0AA0) ........................................................14

1.6 TM-PF30S47-F1 terminal module for PM-D F DC24V PROFIsafe (3RK1903-3AA00)...............16

1.7 Universal terminal module TM-E15x26-A1 (6ES7193-4CAx0-0AA0)..........................................17

1.8 Terminal module TM-E15x24-A1 (6ES7193-4CAx0-0AA0) ........................................................19

1.9 Terminal module TM-E15x24-01 (6ES7193-4CBx0-0AA0).........................................................21

1.10 Terminal module TM-E15x23-01 (6ES7193-4CBx0-0AA0).........................................................23

1.11 Terminal module TM-E15x24-AT (6ES7193-4CLx0-0AA0).........................................................25

1.12 Universal terminal module TM-E30x46-A1 (6ES7193-4CFx0-0AA0)..........................................26

1.13 Terminal module TM-E30x44-01 (6ES7193-4CGx0-0AA0) ........................................................28

1.14 Terminal module TM-C120x (6ES7193-4DLx0-0AA0) ................................................................29

1.15 Supplementary Terminal TE-U120x4x10 (6ES7193-4FLx0-0AA0).............................................30

Index........................................................................................................................................................ 33

Table of contents

Terminal modules

6 Manual, 04/2007, A5E01120034-01

Terminal modules

Manual, 04/2007, A5E01120034-01 7

Properties 1

1.1 Function of terminal modules

Terminal modules implement the electrical and mechanical connection of the I/O modules

with the interface module and the terminating module.

● The inserted I/O module determines the signals to terminals 1 to 16, A3, A4, A7, A8, A11,

A12, A15, A16.

● Depending on the selected terminal module only certain terminals are available.

Select the required terminal module based on the potentials required by your application. For

more detailed information on assigning terminal signals, refer to the manual for the relevant

I/O module.

An AUX(iliary) bus AUX1 is integrated into the terminal modules. Any desired potential (up to

230 VAC) can be applied there. You can use the AUX(iliary) bus individually:

● As a protective conductor bar

● For additionally required voltage

Properties

1.2 Terminal module TM-P15x23-A1 (6ES7193-4CCx0-0AA0)

Terminal modules

8 Manual, 04/2007, A5E01120034-01

1.2 Terminal module TM-P15x23-A1 (6ES7193-4CCx0-0AA0)

Properties

● Terminal modules for power modules

● Infeed for a new potential group up to the next TM-P terminal module

● Available in three variants: screw terminal, spring terminal, "fast connect" quick

connection method without stripping

● Solid AUX1 bus with electrical connection to the next potential group to the left

● Access to the AUX1 potential through terminals A4 and A8

Block diagram

Block diagram of the TM-P15S23-A1, TM-P15C23-A1, and TM-P15N23-A1 terminal

modules

PM-E

① Backplane bus

② Infeed of the power buses to the electronic modules

③ Terminals with connection to the power module

④ Use of terminals A4 and A8 as protective conductor terminals or potential terminals

of any kind

⑤ Infeed of the AUX1 bus by means of terminals A4 and A8

Properties

1.2 Terminal module TM-P15x23-A1 (6ES7193-4CCx0-0AA0)

Terminal modules

Manual, 04/2007, A5E01120034-01 9

TM-P15x23-A1 technical data (6ES7193-4CCx0-0AA0)

Dimensions and weight

Dimensions W × H × D (mm)

•Screw/spring terminals

•Fast Connect

15 × 132 × 43

15 × 162 × 43

Weight Approx. 65 g

Properties

1.3 Terminal module TM-P15x23-A0 (6ES7193-4CDx0-0AA0)

Terminal modules

10 Manual, 04/2007, A5E01120034-01

1.3 Terminal module TM-P15x23-A0 (6ES7193-4CDx0-0AA0)

Properties

● Terminal modules for power modules

● Infeed for a new potential group up to the next TM-P terminal module

● Available in three variants: screw terminal, spring terminal, "fast connect" quick

connection method without stripping

● The signal assignment of the AUX1 bus is specified by the feed to the power module of

this potential group.

● Interrupted AUX1 bus without electrical connection to the next potential group to the left

● Access to the AUX1 potential through terminals A4 and A8

Block diagram

Block diagram for the TM-P15S23-A0, TM-P15C23-A0, and TM-P15N23-A0 terminal

modules

PM-E

① Backplane bus

② Infeed of the power buses to the electronic modules

③ Terminals with connection to the power module

④ Use of terminals A4 and A8 as protective conductor terminals or potential terminals of any

kind

⑤ Infeed of the AUX1 bus by means of terminals A4 and A8

Andere Handbücher für SIMATIC ET 200S

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200eco PN Technisches Dokument

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens 6ES7547-1JF00-0AB0 Bedienungsanleitung

Siemens

Siemens SIMATIC PROFINET Stücklistenhandbuch

Siemens

Siemens SIMATIC ET 200iS Bedienungsanleitung

Siemens

Siemens TALON Series Produkthandbuch

Siemens

Siemens TX-I/O Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200eco PN Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMADYN D EA12 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens BANY Agent Administratorhandbuch

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200X Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200AL Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200M Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens EA12 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens Simatic series Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung