Siemens SIMATIC ET 200SP Bedienungsanleitung

Manual

Digital output module DQ 4x24..230VAC/2A ST (6ES7132-6FD00-0BB1)

ET 200SP

02/2014Edition

Answers for industry.

SIMATIC

DQ 4x24..230VAC/2A ST

___________________

SIMATIC

ET 200SP

DQ 4x24..230VAC/2A ST

digital output module

(6ES7132-6FD00-0BB1)

Manual

02/2014

A5E32043575

-AA

Preface

Guide to documentation

Product overview

Wiring

Parameter

assignment/addressing

Interrupts/diagnostics alarms

Technical specifications

Parameter data record

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E32043575-AA

Ⓟ

02/2014 Technical data subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

Manual, 02/2014, A5E32043575-AA 3

Preface

Purpose of the documentation

This device manual complements the system manual ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/58649293). Functions that generally

relate to the system are described in this manual.

The information provided in this manual and in the system/function manuals supports you in

commissioning the system.

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product and on the section of the documentation to which particular attention

should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, solutions, machines, equipment and/or networks. They are

important components in a holistic industrial security concept. With this in mind, Siemens’

products and solutions undergo continuous development. Siemens recommends strongly

that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific

newsletter. You can find more information on the Internet

(http://support.automation.siemens.com).

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

Manual, 02/2014, A5E32043575-AA 4

Table of contents

Preface ................................................................................................................................................... 3

1 Guide to documentation .......................................................................................................................... 5

2 Product overview .................................................................................................................................... 7

2.1 Properties ...................................................................................................................................... 7

3 Wiring ..................................................................................................................................................... 9

3.1 Terminal assignment..................................................................................................................... 9

3.2 Block diagram ............................................................................................................................. 11

4 Parameter assignment/addressing........................................................................................................ 12

4.1 Parameters.................................................................................................................................. 12

4.2 Explanation of parameters .......................................................................................................... 13

4.3 Address space ............................................................................................................................ 14

5 Interrupts/diagnostics alarms................................................................................................................. 15

5.1 Status and fault displays ............................................................................................................. 15

5.2 Load voltage status ..................................................................................................................... 17

6 Technical specifications ........................................................................................................................ 18

6.1 Technical specifications .............................................................................................................. 18

A Parameter data record .......................................................................................................................... 21

A.1 Parameter assignment and structure of parameter data record................................................. 21

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

Manual, 02/2014, A5E32043575-AA 5

Guide to documentation

Introduction

The documentation for the SIMATIC products has a modular structure and covers topics

relating to your automation system.

The complete documentation for the ET 200SP distributed I/O system consists of a system

manual, function manuals and product manuals.

The STEP 7 information system (online help) also helps you to configure and program your

automation system.

Overview of the documentation for digital output module DQ 4×24..230VAC/2A ST

The table below lists additional documentation that you will need when using the

DQ 4×24..230VAC/2A ST digital output module.

Table 1- 1 Documentation for digital output module DQ 4×24..230VAC/2A ST

Topic

Documentation

Key content

System description System manual ET 200SP distributed

I/O system

(http://support.automation.siemens.co

m/WW/view/en/58649293)

•Application planning

•Installation

•Wiring

•Commissioning

Designing interference-

free controllers

Function manual Designing

interference-free controllers

(http://support.automation.siemens.co

m/WW/view/en/59193566)

•Basics

•Electromagnetic compatibility

•Lightning protection

System diagnostics Function manual Diagnostics

(http://support.automation.siemens.co

m/WW/view/en/59192926)

•Overview

•Diagnostics evaluation of

hardware/software

BaseUnits Manual ET 200SP BaseUnits

(http://support.automation.siemens.co

m/WW/view/en/59753521)

Technical specifications

Amendments and special

features of the ET 200SP

I/O system

ET 200SP Product information

(http://support.automation.siemens.co

m/WW/view/en/73021864)

Current information not yet

documented in the system

manuals, function manuals, or

other manuals.

Guide to documentation

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

6Manual, 02/2014, A5E32043575-AA

SIMATIC manuals

All of the current manuals for SIMATIC products are available for download free of charge

from the Internet (http://www.siemens.com/simatic-tech-doku-portal).

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

Manual, 02/2014, A5E32043575-AA 7

Product overview

2.1

Properties

Order number

6ES7132-6FD00-0BB1

View of the module

Figure 2-1 View of the DQ 4×24..230VAC/2A ST module

Product overview

2.1 Properties

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

8Manual, 02/2014, A5E32043575-AA

Properties

The module has the following technical properties:

●4 digital outputs each with a value status (quality information)

●Supply voltage L+

●Switches in zero point

●Output current 2 A per channel

●Total current 8 A (per module)

●Assignable substitute values (per channel)

●Substitute values (per channel)

●Suitable for solenoid valves, AC contactors, and indicator lights

The module supports the following functions:

●Firmware update

●Identification data I&M0 to I&M3

●Configuration in RUN

●PROFIenergy

You can configure the module with STEP 7 (TIA Portal) and with a GSD file.

Accessories

The following accessories must be ordered separately:

●Labeling strips

●Color identification labels

●Reference identification label

You can find additional information on the accessories in the ET 200SP Distributed I/O

System (http://support.automation.siemens.com/WW/view/en/58649293) system manual.

DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)

Manual, 02/2014, A5E32043575-AA 9

Wiring

3.1

Terminal assignment

General pin assignment

NOTICE

Dangerous voltage. Risk of death or serious injury.

Prior to working on the system and module, always disconnect them from the power supply.

Note

Limiting overvoltage

You must ensure overvoltage is limited to 1 kV for the encoder supply.

Note

Power limitation

To limit power, each input voltage must have a fuse with a

maximum rating of 10 A tripping

current. The fuse must be a quick

-acting microfuse.

Andere Handbücher für SIMATIC ET 200SP

101

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200eco PN Bedienungsanleitung

Siemens

Siemens SIMATIC PROFINET Stücklistenhandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens RXM21.1 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Stücklistenhandbuch

Siemens

Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200AL Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens Simatic ET200pro Bedienungsanleitung

Siemens

Siemens SICAM AI Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC S5 ET 200U Bedienungsanleitung

Siemens

Siemens ZN-31U Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens Simatic ET200pro Bedienungsanleitung

Siemens

Siemens SIMATIC TI505 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Technisches Dokument

Siemens

Siemens SIMATIC ET 200eco PN Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200X Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Benutzerhandbuch

Siemens

Siemens SIRIUS 3RA2711-1CA00 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung