Siemens SIMATIC ET 200SP Bedienungsanleitung

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

SIMATIC

ET 200SP

Analog input module

AI 2xU/I 2-/4-wire HF

(6ES7134-6HB00-0CA1)

Equipment Manual

05/21

A5E51055079

-AA

Preface

ET 200SP Documentation

Guide

Product overview

Wiring

Parameters/address space

Interrupts/diagnostics

alarms

Technical specifications

Parameter data record

Representation of analog

values

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E51055079-AA

Ⓟ

05/2021 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

Equipment Manual, 05/21, A5E51055079-AA 3

Table of contents

1 Preface ................................................................................................................................................... 5

1.1 Open Source Software ......................................................................................................... 5

1.2 Security information ............................................................................................................ 5

2 ET 200SP Documentation Guide ............................................................................................................ 7

3 Product overview................................................................................................................................. 13

3.1 Properties .......................................................................................................................... 13

4 Wiring .................................................................................................................................................. 15

4.1 Wiring and block diagram .................................................................................................. 15

5 Parameters/address space ................................................................................................................... 21

5.1 Measurement types and measuring ranges ........................................................................ 21

5.2 Parameters ........................................................................................................................ 22

5.3 Explanation of parameters ................................................................................................. 26

5.4 Measuring range adjustment ............................................................................................. 30

5.5 Scaling of measured values................................................................................................ 34

5.6 Address space.................................................................................................................... 37

6 Interrupts/diagnostics alarms .............................................................................................................. 41

6.1 Status and error displays .................................................................................................... 41

6.2 Interrupts .......................................................................................................................... 43

6.3 Diagnostics alarms............................................................................................................. 45

7 Technical specifications....................................................................................................................... 47

A Parameter data record......................................................................................................................... 53

A.1 Dependencies when configuring with GSD file ................................................................... 53

A.2 Parameter assignment and structure of parameter data record ........................................... 55

B Representation of analog values......................................................................................................... 67

B.1 Representation of input ranges .......................................................................................... 68

B.2 Representation of analog values in voltage measuring ranges ............................................ 69

B.3 Representation of analog values in the current measuring ranges....................................... 70

B.4 Measured values for wire break.......................................................................................... 71

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

Equipment Manual, 05/21, A5E51055079-AA 5

Preface

1.1 Open Source Software

Open-source software is used in the firmware of the I/O modules. Open Source Software is

provided free of charge. We are liable for the product described, including the open-source

software contained in it, pursuant to the conditions applicable to the product. Siemens

accepts no liability for the use of the open source software over and above the intended

program sequence, or for any faults caused by modifications to the software.

For legal reasons, we are obliged to publish the original text of the license conditions and

(https://support.industry.siemens.com/cs/ww/en/view/109739516).

See also

GNU_V5.3.1_201805 (https://support.industry.siemens.com/cs/ww/en/view/109757558)

1.2 Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

Equipment Manual, 05/21, A5E51055079-AA 7

ET 200SP Documentation Guide

The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC ET 200SP distributed I/O system. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

ET 200SP Documentation Guide

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

8Equipment Manual, 05/21, A5E51055079-AA

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

ET 200SP distributed I/O system, e.g. diagnostics, communication, Web server, motion

control and OPC UA.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742709).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/73021864).

Manual Collection ET 200SP

The Manual Collection contains the complete documentation on the SIMATIC ET 200SP

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.automation.siemens.com/WW/view/en/84133942).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet

(https://support.industry.siemens.com/My/ww/en/documentation).

ET 200SP Documentation Guide

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

Equipment Manual, 05/21, A5E51055079-AA 9

"mySupport" - CAx data

In the CAx data area of "mySupport", you can access the latest product data for your CAx or

CAe system.

You configure your own download package with a few clicks.

In doing so you can select:

•Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

•Manuals, characteristics, operating manuals, certificates

•Product master data

You can find "mySupport" - CAx data on the Internet

(https://support.industry.siemens.com/my/ww/en/CAxOnline).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/cs/ww/en/ps/ae).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated

Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109767888).

ET 200SP Documentation Guide

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

10 Equipment Manual, 05/21, A5E51055079-AA

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of

TIA Portal.

The SIMATIC Automation Tool provides a multitude of functions:

•Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs

•Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a CPU

•Transfer of the date and the programming device/PC time converted to UTC time to the

module

•Program download to CPU

•RUN/STOP mode switchover

•CPU localization by means of LED flashing

•Reading out of CPU error information

•Reading of the CPU diagnostics buffer

•Reset to factory settings

•Firmware update of the CPU and connected modules

You can find the SIMATIC Automation Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/98161300).

PRONETA

SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network

during commissioning. PRONETA features two core functions:

•The topology overview automatically scans the PROFINET and all connected components.

•The IO check is a fast test of the wiring and the module configuration of a plant, incl. fail-

safe inputs and outputs.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

ET 200SP Documentation Guide

Analog input module AI 2xU/I 2-/4-wire HF (6ES7134-6HB00-0CA1)

Equipment Manual, 05/21, A5E51055079-AA 11

SINETPLAN

SINETPLAN, the Siemens Network Planner, supports you in planning automation systems and

networks based on PROFINET. The tool facilitates professional and predictive dimensioning of

your PROFINET installation as early as in the planning stage. In addition, SINETPLAN supports

you during network optimization and helps you to exploit network resources optimally and to

plan reserves. This helps to prevent problems in commissioning or failures during productive

operation even in advance of a planned operation. This increases the availability of the

production plant and helps improve operational safety.

The advantages at a glance

•Network optimization thanks to port-specific calculation of the network load

•Increased production availability thanks to online scan and verification of existing systems

•Transparency before commissioning through importing and simulation of existing STEP 7

projects

•Efficiency through securing existing investments in the long term and the optimal use of

resources

You can find SINETPLAN on the Internet (https://www.siemens.com/sinetplan).

Andere Handbücher für SIMATIC ET 200SP

101

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Industrieelektrik Handbücher

Siemens

Siemens RCD310 Series Bedienungsanleitung

Siemens

Siemens MICROMASTER 440 Bedienungs- und Wartungsanleitung

Siemens

Siemens 3WN6 Bedienungsanleitung

Siemens

Siemens 3VA9117-0HB 0 Series Bedienungsanleitung

Siemens

Siemens VT250 Bedienungsanleitung

Siemens

Siemens SINAMICS G120 Administratorhandbuch

Siemens

Siemens SIPLUS HCS4 00 Series Kurzanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens 7XR61 Series Handbuch

Siemens

Siemens 3RT1955-5A/N Series Bedienungsanleitung

Siemens

Siemens SITRANS TCSC Bedienungsanleitung

Siemens

Siemens FDMH291 Series Bedienungsanleitung

Siemens

Siemens HM656A Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens SIVACON 8PS Bedienungsanleitung

Siemens

Siemens 3RV1952-1E Series Bedienungsanleitung

Siemens

Siemens MICROMASTER 430 Bedienungs- und Wartungsanleitung

Siemens

Siemens Simatic S7-1500 Technisches Dokument

Siemens

Siemens SIRIUS 3RA142.-8XC22 Bedienungsanleitung

Siemens

Siemens 3WX31 46-7C1 3 Series Bedienungsanleitung

Siemens

Siemens SIMOVERT MASTERDRIVE SLE Bedienungsanleitung

Siemens

Siemens SIRIUS 3RT1.3 Bedienungsanleitung

Siemens

Siemens 3TM Bedienungsanleitung

Siemens

Siemens 3VT9500-1U.00 Bedienungsanleitung

Beliebte Industrieelektrik Handbücher anderer Marken

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Technisches Handbuch

Abtech

Abtech HVJB Series Leitfaden

Murata

Murata GRM0335C1H8R1DA01 Series Bedienungsanleitung

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Bedienungsanleitung

Eaton

Eaton Ulusoy HMH24-04 Bedienungsanleitung

Newlong

Newlong NP-7H Bedienungsanleitung

Murata

Murata GJM0335C1E4R4BB01 Series Bedienungsanleitung

Stahl

Stahl 8575/12 Bedienungsanleitung

SI Pegasus Bedienungsanleitung

Murata

Murata GRM1555C1H2R7CA01 Seies Bedienungsanleitung

Murata

Murata GRM0225C1E6R4BA03 Series Bedienungsanleitung

Cooper Power Systems

Cooper Power Systems VXE15 Bedienungsanleitung

S&C

S&C Vista SD Bedienungsanleitung

Murata

Murata GRM0335C2A7R3CA01 Series Bedienungsanleitung

Murata

Murata GRM32ER60G227ME05 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MP-Series Bedienungsanleitung

Phasemation

Phasemation DG-100 Bedienungsanleitung

Murata

Murata GRM219R61C225KA88 Series Bedienungsanleitung