Siemens SICAM MMU 7KG9663 Anwendungshandbuch

E50417-H1040-C514-A3

SICAM MMU

7KG9663

Device Manual

Preface

Open Source Software

Contents

User Information 1

Overview 2

Device Design 3

Measurands and Characteristics 4

Getting Started 5

Connection Principle and Applications 6

Operation 7

Time Synchronization 8

Communication 9

Calibration 10

Maintenance, Storage, Transport 11

Failures and LED Indications 12

Technical Data 13

Operational Indications 14

Operating Parameters 15

Glossary

Index

SICAM-MMU_7KG9663_US.book Page 1 Monday, December 7, 2015 12:22 PM

Disclaimer of Liability

This document has been subjected to rigorous technical review

before being published. It is revised at regular intervals, and any

modifications and amendments are included in the subsequent

issues. The content of this document has been compiled for

information purposes only. Although Siemens AG has made best

effortstokeepthedocumentaspreciseandup-to-dateaspossible,

Siemens AG shall not assume any liability for defects and damage

which result through use of the information contained herein.

This content does not form part of a contract or of business

relations; nor does it change these. All obligations of Siemens AG

are stated in the relevant contractual agreements.

Siemens AG reserves the right to revise this document from time to

time.

Document release E50417-H1040-C514-A3.00

Edition 01.2016

Product version: V2.0

The disclosure, duplication, distribution and editing of this

document, or utilization and communication of the content are not

permitted, unless authorized in writing. All rights, including rights

created by patent grant or registration of a utility model or a design,

are reserved.

Registered Trademarks

SIPROTEC®and SICAM®are registered trademarks of

SIEMENS AG. An unauthorized use is illegal.

All other designations in this document can be trademarks whose

use by third parties for their own purposes can infringe the rights of

the owner.

NOTE

For your own safety, please observe the warnings and safety instructions contained in this document.

SICAM-MMU_7KG9663_US.book Page 2 Monday, December 7, 2015 12:22 PM

3SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Preface

Purpose of this Manual

This manual describes the application, functions, installation, commissioning and operation of the

SICAM MMU 7KG9663.

Target Group

This manual is intended for project engineers, commissioning and operating personnel in electrical systems

and power plants.

Scope of Validity of this Manual

This manual is valid for the SICAM MMU 7KG9663.

Further Support

For any questions concerning your system, please contact your Siemens representative.

The Siemens Customer Support Center provides around-the-clock support.

Phone: +49 (1805) 24-8437

Fax: +49 (1805) 24-2471

Internet: http://www.powerquality.de

e-mail: [email protected]

Training Courses

If you are interested in our current training program, please contact our training center:

Siemens AG

Siemens Power Academy TD

Humboldtstr. 59

D-90459 Nuremberg

Tel.: +49 (911) 433-7415

Fax: +49 (911) 433-5482

e-mail: poweracademy[email protected]

Internet: http://www.siemens.com/poweracademy

SICAM-MMU_7KG9663_US.book Page 3 Monday, December 7, 2015 12:22 PM

4SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Notes On Safety

This manual does not constitute a complete catalog of all safety measures required for operating the equipment

(module, device) in question, because special operating conditions may require additional measures. However,

it does contain notes that must be adhered to for your own personal safety and to avoid damage to property.

These notes are highlighted with a warning triangle and different keywords indicating different degrees of dan-

ger.

DANGER

Danger means that death or severe injury will occur if the appropriate safety measures are not taken.

✧Follow all advice instructions to prevent death or severe injury.

WARNING

Warning means that death or severe injury can occur if the appropriate safety measures are not taken.

✧Follow all advice instructions to prevent death or severe injury.

CAUTION

Caution means that minor or moderate injury can occur if the appropriate safety measures are not taken.

✧Follow all advice instructions to prevent minor injury.

NOTICE

Notice means that damage to property can occur if the appropriate safety measures are not taken.

✧Follow all advice instructions to prevent damage to property.

NOTE

is important information about the product, the handling of the product, or the part of the documentation in

question to which special attention must be paid.

SICAM-MMU_7KG9663_US.book Page 4 Monday, December 7, 2015 12:22 PM

5SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Personnel Qualified in Electrical Engineering

Only qualified electrical engineering personnel may commission and operate the equipment (module, device)

described in this document. Qualified electrical engineering personnel in the sense of this manual are people

who can demonstrate technical qualifications as electrical technicians. These persons may commission, iso-

late, ground, and label devices, systems and circuits according to the standards of safety engineering.

Use as Prescribed

The equipment (device, module) must not be used for any other purposes than those described in the Catalog

and the Technical Description. If it is used together with third-party devices and components, these must be

recommended or approved by Siemens.

If the device is not used in accordance with the Product Information and this manual, the scheduled protection

is impaired.

Problem-free and safe operation of the product depends on the following:

• Proper transport

• Proper storage, setup, and installation

• Proper operation and maintenance

When electrical equipment is operated, hazardous voltages are inevitably present in certain parts. If proper ac-

tion is not taken, death, severe injury, or property damage can result.

• The equipment must be grounded at the grounding terminal before any connections are made.

• All circuit components connected to the power supply may be subject to dangerous voltage.

• Hazardous voltages may be present in equipment even after the supply voltage has been disconnected

(capacitors can still be charged).

• Equipment with exposed current transformer circuits must not be operated. Prior to disconnecting the

equipment, ensure that the current transformer circuits are short-circuited.

• The limit values stated in the document may not be exceeded. This mustalso be considered during testing

and commissioning.

SICAM-MMU_7KG9663_US.book Page 5 Monday, December 7, 2015 12:22 PM

6SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Used Symbols

No. Symbol Description

1 Direct current

IEC 60417-5031

2 Alternating current

IEC 60417-5032

3 Direct current and alternating current

IEC 60417-5033

4 Three-phase alternating current

5 Earth (ground) terminal

IEC 60417-5017

6 Protective conductor terminal

IEC 60417-5019

7 Caution, risk of electric shock

8 Caution, risk of danger

ISO 7000-0434

SICAM-MMU_7KG9663_US.book Page 6 Monday, December 7, 2015 12:22 PM

7SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Statement of Conformity

Further Standards

This product complies with the directive of the Council of the European Communities on the approx-

imation of the laws of the Member States relating to electromagnetic compatibility (EMC Council Di-

rective 2004/108/EC - valid until April, 19th of 2016, EMC Council Directive 2014/30/EU - valid from

April, 20th of 2016) and concerning electrical equipment for use within specified voltage limits (Low-

voltage Directive 2006/95/EC - valid until April, 19th of 2016, Low Voltage Directive 2014/35/EU -

valid from April, 20th of 2016).

This conformity has been established by means of tests conducted by Siemens AG according to the

Council Directive in agreement with the generic standards

EN 61000-6-2 and EN 61000-6-4 for the EMC directives, and with the standard EN 61010-1 for the

low-voltage directive.

The device has been designed and produced for industrial use.

The product conforms to the standard EN 60688.

This product is UL-certified to Standard UL 61010-1, third edition, based on the specification stated in chapter 13.1

(Technical Data). UL File No.: E228586.

Open-type Measuring Equipment

2UD1

SICAM-MMU_7KG9663_US.book Page 7 Monday, December 7, 2015 12:22 PM

8SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

SICAM-MMU_7KG9663_US.book Page 8 Monday, December 7, 2015 12:22 PM

9SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Open Source Software

Theproductcontains, amongotherthings,OpenSource Softwaredeveloped bythirdparties. TheOpen Source

Software used in the product and the license agreements concerning this software can be found in the

Readme_OSS.

These Open Source Software files are protected by copyright. Your compliance with those license conditions

will entitle you to use the Open Source Software as foreseen in the relevant license. In the event of conflicts

between Siemens license conditions and the Open Source Software license conditions, the Open Source Soft-

ware conditions shall prevail with respect to the Open Source Software portions of the software.

The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software License

Conditions provide for it you can order the source code of the Open Source Software from your Siemens sales

contact - against payment of the shipping and handling charges - for a period of at least 3 years since purchase

of the Product. We are liable for the Product including the Open Source Software contained in it pursuant to

the license conditions applicable to the Product. Any liability for the Open Source Software beyond the program

flow intended for the Product is explicitly excluded. Furthermore any liability for defects resulting from modifi-

cations to the Open Source Software by you or third parties is excluded. We do not provide any technical sup-

port for the Product if it has been modified.

SICAM-MMU_7KG9663_US.book Page 9 Monday, December 7, 2015 12:22 PM

Glossary

10 SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

SICAM-MMU_7KG9663_US.book Page 10 Monday, December 7, 2015 12:22 PM

Inhaltsverzeichnis

Andere Siemens Messgerät Handbücher

Siemens

Siemens Set CEM CERT Bedienungsanleitung

Siemens

Siemens 5SV8 200-6KK Service-Handbuch

Siemens

Siemens SITRANS FUH1010PVDX Bedienungsanleitung

Siemens

Siemens SITRANS F M MAG 5000 Bedienungsanleitung

Siemens

Siemens SITRANS F US SONOFLO Bedienungsanleitung

Siemens

Siemens SITRANS F M MAG 8000 Bedienungsanleitung

Siemens

Siemens SENTRON PAC5200 Anwendungshandbuch

Siemens

Siemens Synco 700 Series Bedienungsanleitung

Siemens

Siemens SITRANS P500 Administratorhandbuch

Siemens

Siemens 9700 Bedienungsanleitung

Siemens

Siemens SITRANS F C MASSFLO MASS 2100 Administratorhandbuch

Siemens

Siemens FUS1010 Bedienungsanleitung

Siemens

Siemens ULTRAMAT 6 Benutzerhandbuch

Siemens

Siemens SITRANS TDL Bedienungsanleitung

Siemens

Siemens MD-12HD Bedienungsanleitung

Siemens

Siemens TS2000 Bedienungsanleitung

Siemens

Siemens SITRANS F M MAG 5000 Bedienungsanleitung

Siemens

Siemens SEM3 Bedienungsanleitung

Siemens

Siemens SITRANS FS230 Bedienungsanleitung

Siemens

Siemens SITRANS WF100 Bedienungsanleitung

Siemens

Siemens SENTRON PAC2200CLP Bedienungsanleitung

Siemens

Siemens SITRANS FUE950 Bedienungsanleitung

Siemens

Siemens CLINITEK Status+ Handbuch

Siemens

Siemens SENTRON PAC1020 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung