Siemens SICAM Q200 7KG97 Bedienungsanleitung

SICAM

Class A Power Quality

Instrument and Power

Monitoring Device SICAM

Q200 7KG97

OPC UA PubSub (MQTT)

Data Points

V02.50

Manual

E50417-H1040-C621-A2

Preface

Open Source Software

Table of Contents

Data-Points Mapping 1

Literature

NOTE

For your own safety, observe the warnings and safety instructions contained in this document, if available.

Disclaimer of Liability

Subject to changes and errors. The information given in

this document only contains general descriptions and/or

performance features which may not always specifically

reflect those described, or which may undergo modifica-

tion in the course of further development of the products.

The requested performance features are binding only when

they are expressly agreed upon in the concluded contract.

Document version: E50417-H1040-C621-A2.03

Edition: 01.2020

Version of the product described: V02.50

The disclosure, duplication, distribution and editing of this

document, or utilization and communication of the content

are not permitted, unless authorized in writing. All rights,

including rights created by patent grant or registration of a

utility model or a design, are reserved.

Trademarks

SIPROTEC™, DIGSI™, SIGRA™, SIGUARD™, SAFIR™, SICAM™,

and MindSphere™ are trademarks of Siemens. Any unau-

thorized use is prohibited. All other designations in this

document may represent trademarks whose use by third

parties for their own purposes may violate the proprietary

rights of the owner.

Preface

Purpose of the Manual

This manual describes the OPC UA PubSub (MQTT) data points for the Class A Power Quality Instrument and

Power Monitoring Device SICAM Q200.

Target Audience

This manual is intended for project engineers, commissioning and operating personnel in electrical systems

and power plants.

Scope

This manual is valid for the Class A Power Quality Recorder and the Multifunctional Measuring Device

SICAM Q200.

Standards

This product is UL-certified to Standard UL 61010-1, third edition, based on the Technical data.

(UL File No.: E228586)

IND. CONT. EQ.

69CA

Open-type Measuring Equipment

2UD1

For further information see UL database in the internet: http://ul.com.

Select Online Certifications Directory and insert E228586 under UL File Number.

Additional Support

For questions about the system, contact your Siemens sales partner.

Customer Support Center

Our Customer Support Center provides a 24-hour service.

Siemens AG

Customer Support Center

Humboldtstrasse 59

90459 Nuremberg

Germany

E-mail: [email protected]

Training Courses

Inquiries regarding individual training courses should be addressed to our Training Center:

Siemens AG Phone: +49 (911) 433-7415

Siemens Power Academy TD Fax: +49 (911) 433-7929

Humboldtstrasse 59 E-mail: [email protected]

SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual 3

E50417-H1040-C621-A2, Edition 01.2020

90459 Nuremberg Internet: www.siemens.com/poweracademy

Germany

Notes on Safety

This document is not a complete index of all safety measures required for operation of the equipment (module

or device). However, it comprises important information that must be followed for personal safety, as well as

to avoid material damage. Information is highlighted and illustrated as follows according to the degree of

danger:

DANGER

DANGER means that death or severe injury will result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

WARNING

WARNING means that death or severe injury may result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

CAUTION

CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.

²Comply with all instructions, in order to avoid moderate or minor injuries.

NOTICE

NOTICE means that property damage can result if the measures specified are not taken.

²Comply with all instructions, in order to avoid property damage.

NOTE

Important information about the product, product handling or a certain section of the documentation

which must be given attention.

Preface

4 SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual

E50417-H1040-C621-A2, Edition 01.2020

Open Source Software

The product contains, among other things, Open Source Software developed by third parties. The Open

Source Software used in the product and the license agreements concerning this software can be found in the

Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those

license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the

event of conflicts between Siemens license conditions and the Open Source Software license conditions, the

Open Source Software conditions shall prevail with respect to the Open Source Software portions of the soft-

ware. The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software

License Conditions provide for it you can order the source code of the Open Source Software from your

Siemens sales contact – against payment of the shipping and handling charges – for a period of at least 3

years after purchase of the product. We are liable for the product including the Open Source Software

contained in it pursuant to the license conditions applicable to the product. Any liability for the Open Source

Software beyond the program flow intended for the product is explicitly excluded. Furthermore any liability

for defects resulting from modifications to the Open Source Software by you or third parties is excluded. We

do not provide any technical support for the product if it has been modified.

SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual 5

E50417-H1040-C621-A2, Edition 01.2020

6 SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual

E50417-H1040-C621-A2, Edition 01.2020

Table of Contents

Preface..........................................................................................................................................................3

Open Source Software..................................................................................................................................5

1 Data-Points Mapping.................................................................................................................................... 9

1.1 Introduction......................................................................................................................10

1.2 Indications........................................................................................................................ 11

1.3 Voltage Variations.............................................................................................................13

1.4 Transient Events............................................................................................................... 14

1.5 Measured Values...............................................................................................................15

1.6 Harmonics........................................................................................................................ 18

1.7 Measured Values (Min.).................................................................................................... 20

1.8 Measured Values (Max.)....................................................................................................23

1.9 Harmonics (Max.)............................................................................................................. 26

1.10 Energy Values................................................................................................................... 28

1.11 Security Counters..............................................................................................................30

Literature.................................................................................................................................................... 31

SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual 7

E50417-H1040-C621-A2, Edition 01.2020

8 SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual

E50417-H1040-C621-A2, Edition 01.2020

Data-Points Mapping

1.1 Introduction 10

1.2 Indications 11

1.3 Voltage Variations 13

1.4 Transient Events 14

1.5 Measured Values 15

1.6 Harmonics 18

1.7 Measured Values (Min.) 20

1.8 Measured Values (Max.) 23

1.9 Harmonics (Max.) 26

1.10 Energy Values 28

1.11 Security Counters 30

SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual 9

E50417-H1040-C621-A2, Edition 01.2020

Introduction

All data points shown in this document are transmitted by default via the OPC UA PubSub (MQTT) protocol.

As an option, the transmission of Harmonics and Energy values can be disabled during the device configura-

tion in order to reduce the data volume if necessary.

In addition to these data points a file with device asset information (serial number, order number etc.) is trans-

mitted during the communication startup and every 2 hours after communication startup when the communi-

cation is established.

For options to adapt and select the published data points, refer to the SICAM Q200, 7KG97xx Device Manual,

V02.50.

General Remarks for the Mapping of Measured Values and Harmonics

The described default mapping presupposes that:

•All harmonics are enabled on the OPC UA PubSub (MQTT) configuration page and no imported

mapping file is used.

By default, all measured values and harmonics are transmitted as aggregated values.

For each aggregated measured value 3 data points (average, minimum, maximum) and for each aggregated

harmonics 2 data points (average, maximum) are published.

The average value of the frequency has an independent, fixed aggregation interval of 10 s and the prefix is

PQA4.

1.1

Data-Points Mapping

1.1 Introduction

10 SICAM, Class A Power Quality Instrument and Power Monitoring Device SICAM Q200 7KG97, Manual

E50417-H1040-C621-A2, Edition 01.2020

Andere Handbücher für SICAM Q200 7KG97

Inhaltsverzeichnis

Andere Siemens Messgerät Handbücher

Siemens

Siemens SITRANS MAG 1100 F Bedienungsanleitung

Siemens

Siemens pointek CLS 100 Bedienungsanleitung

Siemens

Siemens SENTRON PAC3200 Bedienungsanleitung

Siemens

Siemens 9330 series Bedienungsanleitung

Siemens

Siemens SITRANS FC430 Bedienungsanleitung

Siemens

Siemens SITRANS MAG 1100 F Bedienungsanleitung

Siemens

Siemens SITRANS F Bedienungsanleitung

Siemens

Siemens 3WN1 3ZX1812-0WX31-9BN1 Bedienungsanleitung

Siemens

Siemens Clinitek Advantus Bedienungsanleitung

Siemens

Siemens SITRANS F C MASSFLO MASS 2100 Bedienungsanleitung

Siemens

Siemens Sitrans Probe LR Bedienungsanleitung

Siemens

Siemens SICAM P 7KG7750 Bedienungsanleitung

Siemens

Siemens SITRANS TDL Bedienungsanleitung

Siemens

Siemens SITRANS 7MF1570 Bedienungsanleitung

Siemens

Siemens SITRANS LR 400 Bedienungsanleitung

Siemens

Siemens SITRANS F Series Bedienungsanleitung

Siemens

Siemens SENTRON PAC3200T Bedienungsanleitung

Siemens

Siemens 6GA7202-2AA10-1BF1 Bedienungsanleitung

Siemens

Siemens SITRANS SL Bedienungsanleitung

Siemens

Siemens SICAM P 7KG7755 Bedienungsanleitung

Siemens

Siemens FST020 Stücklistenhandbuch

Siemens

Siemens SIRIUS Merkblatt

Siemens

Siemens CLINITEK Status+ Handbuch

Siemens

Siemens FDBZ492-PR Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung