Siemens SICAM Q200 7KG97 Bedienungsanleitung

SICAM

Multifunctional Recorder

SICAM Q200 7KG97

Communication

V02.00

Manual

E50417-C1040-C606-A3

Preface

Open Source Software

Table of Contents

User Information 1

Communication Modbus 2

Communication IEC 61850 3

Glossary

NOTE

For your own safety, observe the warnings and safety instructions contained in this document, if available.

Disclaimer of Liability

This document has been subjected to rigorous technical

review before being published. It is revised at regular inter-

vals, and any modifications and amendments are included

in the subsequent issues. The content of this document has

been compiled for information purposes only. Although

Siemens AG has made best efforts to keep the document as

precise and up-to-date as possible, Siemens AG shall not

assume any liability for defects and damage which result

through use of the information contained herein.

This content does not form part of a contract or of business

relations; nor does it change these. All obligations of

Siemens AG are stated in the relevant contractual agree-

ments.

Siemens AG reserves the right to revise this document from

time to time.

Document version: E50417-C1040-C606-A3.02

Edition: 03.2017

Version of the product described: V02.00

The disclosure, duplication, distribution and editing of this

document, or utilization and communication of the content

are not permitted, unless authorized in writing. All rights,

including rights created by patent grant or registration of a

utility model or a design, are reserved.

Registered Trademarks

SIPROTEC®, DIGSI®, SIGUARD®, SIMEAS®, and SICAM® are

registered trademarks of Siemens AG. Any unauthorized

use is illegal. All other designations in this document can

be trademarks whose use by third parties for their own

purposes can infringe the rights of the owner.

Preface

Purpose of the Manual

This manual describes the communication of the SICAM Q200 device.

Target Audience

This manual is intended for project engineers, commissioning and operating personnel in electrical systems

and power plants.

Scope

This manual is valid for SICAM Q200.

Indication of Conformity

This product complies with the directive of the Council of the European Communities

on harmonization of the laws of the Member States relating to electromagnetic

compatibility (EMC Directive 2014/30/EU) and concerning electrical equipment for use

within specified voltage limits (Low Voltage Directive 2014/35/EU).

This conformity has been proved by tests performed according to the Council Directive

in accordance with the generic standard EN 61000-6-5 (for EMC directive) and with the

product standard EN 62586-1 (for Low Voltage Directive) by Siemens AG

The device is designed and manufactured for application in an industrial environment.

The product conforms with the international standards of EN 62586 and the German

standard VDE 0415.

Other Standards

This product is UL-certified to Standard UL 61010-1, third edition, based on the Technical data.

(UL File No.: E228586)

IND. CONT. EQ.

69CA

Open-type Measuring Equipment

2UD1

For further information see UL database on the internet: http://ul.com.

Select Online Certifications Directory and insert E228586 under UL File Number.

Additional Support

For questions about the system, please contact your Siemens sales partner.

Support

Our Customer Support Center provides a 24-hour service.

Phone: +49 (180) 524-7000

Fax: +49 (180) 524-2471

SICAM, Multifunctional Recorder, Manual 3

E50417-C1040-C606-A3, Edition 03.2017

E-Mail: [email protected]

Training Courses

Inquiries regarding individual training courses should be addressed to our Training Center:

Siemens AG

Siemens Power Academy TD

Humboldtstraße 59

90459 Nürnberg

Germany

Phone: +49 (911) 433-7415

Fax: +49 (911) 433-7929

E-Mail: [email protected]

Internet: www.siemens.com/poweracademy

Notes on Safety

This document is not a complete index of all safety measures required for operation of the equipment (module

or device). However, it comprises important information that must be followed for personal safety, as well as

to avoid material damage. Information is highlighted and illustrated as follows according to the degree of

danger:

DANGER

DANGER means that death or severe injury will result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

WARNING

WARNING means that death or severe injury may result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

CAUTION

CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.

²Comply with all instructions, in order to avoid moderate or minor injuries.

NOTICE

NOTICE means that property damage can result if the measures specified are not taken.

²Comply with all instructions, in order to avoid property damage.

Preface

4 SICAM, Multifunctional Recorder, Manual

E50417-C1040-C606-A3, Edition 03.2017

NOTE

Important information about the product, product handling or a certain section of the documentation

which must be given particular attention.

Qualified Electrical Engineering Personnel

Only qualified electrical engineering personnel may commission and operate the equipment (module, device)

described in this document. Qualified electrical engineering personnel in the sense of this manual are people

who can demonstrate technical qualifications as electrical technicians. These persons may commission,

isolate, ground and label devices, systems and circuits according to the standards of safety engineering.

Proper Use

The equipment (device, module) may be used only for such applications as set out in the catalogs and the

technical description, and only in combination with third-party equipment recommended and approved by

Siemens.

Problem-free and safe operation of the product depends on the following:

•Proper transport

•Proper storage, setup and installation

•Proper operation and maintenance

When electrical equipment is operated, hazardous voltages are inevitably present in certain parts. If proper

action is not taken, death, severe injury or property damage can result:

•The equipment must be grounded at the grounding terminal before any connections are made.

•All circuit components connected to the power supply may be subject to dangerous voltage.

•Hazardous voltages may be present in equipment even after the supply voltage has been disconnected

(capacitors can still be charged).

•Operation of equipment with exposed current-transformer circuits is prohibited. Before disconnecting the

equipment, ensure that the current-transformer circuits are short-circuited.

•The limiting values stated in the document must not be exceeded. This must also be considered during

testing and commissioning.

Used Symbols

No. Symbol Description

1 Direct current

IEC 60417-5031

2 Alternating current

IEC 60417-5032

3 Direct and alternating current

IEC 60417-5033

4 3-phase alternating current

5 Earth (ground) terminal

IEC 60417-5017

6 Protective conductor terminal

IEC 60417-5019

Preface

SICAM, Multifunctional Recorder, Manual 5

E50417-C1040-C606-A3, Edition 03.2017

6 SICAM, Multifunctional Recorder, Manual

E50417-C1040-C606-A3, Edition 03.2017

Open Source Software

The product contains, among other things, Open Source Software developed by third parties. The Open

Source Software used in the product and the license agreements concerning this software can be found in the

Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those

license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the

event of conflicts between Siemens license conditions and the Open Source Software license conditions, the

Open Source Software conditions shall prevail with respect to the Open Source Software portions of the soft-

ware. The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software

License Conditions provide for it you can order the source code of the Open Source Software from your

Siemens sales contact - against payment of the shipping and handling charges - for a period of at least 3 years

since purchase of the Product. We are liable for the Product including the Open Source Software contained in

it pursuant to the license conditions applicable to the Product. Any liability for the Open Source Software

beyond the program flow intended for the Product is explicitly excluded. Furthermore any liability for defects

resulting from modifications to the Open Source Software by you or third parties is excluded. We do not

provide any technical support for the Product if it has been modified.

SICAM, Multifunctional Recorder, Manual 7

E50417-C1040-C606-A3, Edition 03.2017

8 SICAM, Multifunctional Recorder, Manual

E50417-C1040-C606-A3, Edition 03.2017

Table of Contents

Preface..........................................................................................................................................................3

Open Source Software..................................................................................................................................7

1 User Information........................................................................................................................................ 11

1.1 General User Information.................................................................................................. 12

2 Communication Modbus............................................................................................................................ 13

2.1 Functions, Properties and Exception Responses for Modbus TCP Server and Modbus

RTU (Slave)....................................................................................................................... 14

2.2 Functions and Properties for Modbus RTU Master.............................................................. 16

2.3 Exception Responses from the Modbus Gateway............................................................... 18

2.4 Modbus Registers..............................................................................................................19

2.4.1 Modbus Specifications................................................................................................. 19

2.4.2 Mapping Documentation of the SICAM Devices............................................................ 19

2.5 Modbus Data Format.........................................................................................................21

2.5.1 Data Types - General....................................................................................................21

2.5.2 Data Type - Measured Value (Read)..............................................................................21

2.5.3 Data Type - Date/Time (Read and Write)....................................................................... 23

2.5.4 Data Type - Indications (Read)......................................................................................24

2.5.5 Data Type - Controllable Indications (Read and Write)...................................................24

2.5.6 Data Type - Counter (Read).......................................................................................... 25

3 Communication IEC 61850......................................................................................................................... 27

3.1 General.............................................................................................................................28

Glossary...................................................................................................................................................... 29

SICAM, Multifunctional Recorder, Manual 9

E50417-C1040-C606-A3, Edition 03.2017

10 SICAM, Multifunctional Recorder, Manual

E50417-C1040-C606-A3, Edition 03.2017

Andere Handbücher für SICAM Q200 7KG97

Inhaltsverzeichnis

Andere Siemens Messgerät Handbücher

Siemens

Siemens Sitrans F Series Bedienungsanleitung

Siemens

Siemens SMART 7KT Bedienungsanleitung

Siemens

Siemens FIDAMAT 6 Bedienungsanleitung

Siemens

Siemens Maxum II Bedienungsanleitung

Siemens

Siemens SENTRON 3NJ69 Bedienungsanleitung

Siemens

Siemens UH50 Series Kurzanleitung

Siemens

Siemens SIPROCESS GA700 Administratorhandbuch

Siemens

Siemens 3KF9010-1AA00 Bedienungsanleitung

Siemens

Siemens SIPLUS CMS2000 Administratorhandbuch

Siemens

Siemens SITRANS FUS380 Bedienungsanleitung

Siemens

Siemens SITRANS FX300 Bedienungsanleitung

Siemens

Siemens as-interface ANALYSER 3RK1 904-3AB01 Bedienungsanleitung

Siemens

Siemens SENTRON PAC3200T Bedienungsanleitung

Siemens

Siemens SITRANS FC430 Administratorhandbuch

Siemens

Siemens SIPROCESS GA700 Administratorhandbuch

Siemens

Siemens SITRANS FX330 Bedienungsanleitung

Siemens

Siemens SITRANS F C MASSFLO MASS 2100 Bedienungsanleitung

Siemens

Siemens SITRANS FM100 Bedienungsanleitung

Siemens

Siemens SITRANS F US SONOFLO Bedienungsanleitung

Siemens

Siemens SENTRON PAC5200 Anwendungshandbuch

Siemens

Siemens Sitrans LR200 Bedienungsanleitung

Siemens

Siemens ET 200M Bedienungsanleitung

Siemens

Siemens Clinitek Advantus Bedienungsanleitung

Siemens

Siemens Sitrans F Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung