Siemens SIMATIC NET S7-CPs Bedienungsanleitung

SIMATIC NET

S7-CPs for Industrial Ethernet

Manual Part B

CP 343-1 Lean

6GK7 343−1CX10−0XE0 as of hardware version 2, as of firmware version V2.2

for SIMATIC S7−300 / C7−300

Release 09/2009

C79000-G8976-C198-06

TP port:

2 x 8-pin RJ-45 jack

(beneath the front panel)

LEDs

X = Placeholder for hardware

version

Notes on the product

B−2CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

Notes on the product

Product names

This description contains information on the following product

SCP 343−1 Lean

Order number 6GK7 343−1CX10−0XE0

as of hardware version 2 and firmware version V2.2

for SIMATIC S7−300 / C7−300

Note

In this document, the term CP is used instead of the full product name.

Compatibility with the previous version

Note

Make sure that you read the information regarding extended functions and

restrictions in Chapter 7 of this manual!

Address label: Unique MAC address preset for the CP

The CP ships with a factory-set MAC address. The MAC address is printed on the

housing.

Contents

B−3

CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

Contents

Contents −Part A

Ethernet CPs −general information see general part. . . . . . . . . . . . . . . . . . .

Note

Please remember that Part A of the device manual also belongs to the description

of the CP. Among other things, it contains explanations of the safety notices and

general information that applies to all S7 CPs for Industrial Ethernet.

Part A of the manual release 05/2008 and this Part B belong together

You can download the general Part from the Internet:

http://support.automation.siemens.com/WW/view/en/30374198

Contents −Part B

1 Properties / Services B−5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Application B−5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Communication services B−5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Other services B−6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Requirements for Use B−8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Operation in controller device families B−8. . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Configuration B−11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Programming B−11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Installation and Commissioning B−13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Procedure / steps B−13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Module replacement without PG B−16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Controlling the operating mode B−17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 LED Displays B−18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Performance Data / Operation B−22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Number of possible connections over Ethernet B−22. . . . . . . . . . . . . . . . . . .

5.2 Characteristic data for S7 communication B−23. . . . . . . . . . . . . . . . . . . . . . . .

5.3 Characteristics of the SEND/RECEIVE interface B−24. . . . . . . . . . . . . . . . . .

5.4 PROFINET IO B−25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4.1 Characteristic data B−25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4.2 Operating PROFINET IO alongside other services B−26. . . . . . . . . . . . . . . .

Contents

B−4CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

5.4.3 Effects of multicast communication on RT communication B−26. . . . . . . . .

5.5 Characteristic data of the integrated switch B−27. . . . . . . . . . . . . . . . . . . . . .

6 The CP as Web server B−28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Compatibility with Predecessor Products B−29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.1 Enhanced functions B−29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2 Replacing older modules: spares / upgrading B−30. . . . . . . . . . . . . . . . . . . . .

8 Further Notes on Operation B−32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.1 Clear/reset and Reset to factory settings B−32. . . . . . . . . . . . . . . . . . . . . . . .

8.2 Network settings with Fast Ethernet B−33. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.3 Influence of MPI on connections via Industrial Ethernet B−35. . . . . . . . . . . .

8.4 IP configuration B−36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.4.1 Detection of double IP addressing in the network B−36. . . . . . . . . . . . . . . . .

8.4.2 Obtaining the IP address over DHCP: CP STOP on expiry of the

lease B−36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.5 Media redundancy B−37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.6 Time-of-day synchronization B−37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.7 SNMP agent B−39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.8 Possible security gaps on standard IT interfaces: preventing illegal

access B−40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.9 Interface in the user program B−41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.9.1 Programmed communication connections with FB55 IP_CONFIG

(PROFINET interface) B−41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.9.2 Programmed communications connections −Assigning parameters to

the ports B−42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 How to Load New Firmware B−43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 Technical Specifications B−44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11 Other Information available about the CP B−45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 References and Literature B−46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 Properties / Services

B−5

CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

1 Properties / Services

1.1 Application

The CP 343-1 Lean communications processor is intended for operation in a

SIMATIC S7-300 or SIMATIC C7 automation system. It allows attachment of the

S7-300 to Industrial Ethernet and supports PROFINET IO.

To integrate the CP in a linear bus or ring, to connect a further Ethernet device or

to use PROFINET media redundancy, a 2-port real time ERTEC switch with

autocrossing, autonegotiation and autosensing was integrated in the CP.

1.2 Communication services

The CP supports the following communication services:

SPROFINET IO

PROFINET IO allows direct access to IO devices over Industrial Ethernet.

−PROFINET IO device

Integration of the SIMATIC S7-300 programmable controller over the CP as

intelligent PROFINET IO device.

SS7 communication and PG/OP communication with the following functions:

−PG functions (including routing)

−Operator control and monitoring functions (HMI)

−Server for data exchange on S7 connections configured at one end only

without communication blocks on the S7-300 / C7-300 station

SOpen communications services with the following functions:

−SEND/RECEIVE interface over ISO-on-TCP, TCP and UDP connections

UDP frame buffering on the CP can be disabled during configuration. When

necessary, this allows you to achieve a shorter reaction time between the

arrival of a UDP frame and its evaluation on the CPU.

−Multicast over UDP connection

The multicast mode is made possible by selecting a suitable IP address

when configuring connections.

−FETCH/WRITE services (server; corresponding to S5 protocol) over

ISO-on-TCP connections and TCP connections;

The addressing mode can be configured for FETCH/WRITE access as the

S7 or S5 addressing mode.

1 Properties / Services

B−6CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

−LOCK/UNLOCK with FETCH/WRITE services;

−Connection diagnostics using the user program

1.3 Other services

Within an Ethernet network with a ring topology, the CP supports the media

redundancy protocol MRP. You can assign the role of redundancy client to the

CP. There must be another node in the ring other than the MRP redundancy

manager.

STime-of-day synchronization over Industrial Ethernet using the following

configurable modes:

−SIMATIC mode

The CP receives MMS time messages and synchronizes its local time and

the time of the CPU.

(accuracy approx. +/−1 second)

You can choose whether or not the time of day is forwarded. The forwarding

direction can also be selected (station > LAN or LAN > station).

−NTP mode (NTP: Network Time Protocol)

The CP sends time-of-day queries at regular intervals to an NTP server and

synchronizes its local time of day and the time of the CPU (accuracy approx.

+/−1 second).

SAddressing using a factory-set MAC address

The CP can be reached over the default MAC address to allow an IP address to

be assigned.

SSNMP Agent

The CP supports data queries over SNMP version V1 (Simple Network

Management Protocol). It delivers the content of certain MIB objects according

to the MIB II standard and LLDP MIB.

STime of day for the diagnostic buffer

If a time master exists (using the NTP or SIMATIC mode), the time for

CP-internal diagnostic buffer is synchronized over the LAN.

SModule access protection

To protect the module form accidental or unauthorized access, protection can

be configured at various levels.

SIP configuration

For the PROFINET interface, you can configure how and with which method

the CP is assigned the IP address, the subnet mask and the address of a

gateway.

1 Properties / Services

B−7

CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

As an alternative to STEP 7, you have the option of assigning the connection

configuration via a block interface in the user program (FB55: IP_CONFIG).

SWeb diagnostics

With the aid of Web diagnostics, you can read out the diagnostic data from a

station connected via the CP to a PG/PC with an Internet browser.

If you do not require this function, you can disable it in the STEP 7 configuration

and disable the port 80.

2 Requirements for Use

B−8CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

2 Requirements for Use

2.1 Operation in controller device families

The CP can be operated in the following device families:

SS7-300 stations with the CPU types

−Standard

−Compact

−Modular

SC7 control systems in C7 packaging system

The following tables show the devices with which the CP can be operated with this

range of functions:

Notice

The tables list the CPUs and devices approved at the time of printing this manual.

S7-300 CPUs or C7 or C7 control systems approved later and not listed in the

table also support the range of functions described here.

Table 2-1 Use of the CP with S7-300

CPU Order number

CPU 312 6ES7 312−1AD10−0AB0

6ES7 312−1AE13−0AB0

CPU 312C 6ES7 312−5BD01−0AB0

6ES7 312−5BE03−0AB0

CPU 312 IFM 6ES7 312-5AC02-0AB0

CPU 313 6ES7 313-1AD03-0AB0

CPU 313C 6ES7 313−5BE01−0AB0

6ES7 313−5BF03−0AB0

CPU 313C-2 DP 6ES7 313−6CE01−0AB0

6ES7 313−6CF03−0AB0

CPU 313C-2 PtP 6ES7 313−6BE01−0AB0

6ES7 313−6BF03−0AB0

CPU 314 6ES7 314−6AE01−0AB0

6ES7 314−6AE02−0AB0

6ES7 314−6AE03−0AB0

6ES7 314−6AE04−0AB0

6ES7 314−1AF10−0AB0

6ES7 314−1AF11−0AB0

6ES7 314−1AG13−0AB0

2 Requirements for Use

B−9

CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

Table 2-1 Use of the CP with S7-300

CPU Order number

CPU 314 IFM 6ES7 314−5AE03−0AB0

6ES7 314−5AE10−0AB0

CPU 314C-2 DP 6ES7 314−6CF02−0AB0

6ES7 314−6CG03−0AB0

CPU 314C-2 PtP 6ES7 314−6BF01−0AB0

6ES7 314−6BF02−0AB0

6ES7 314−6BG03−0AB0

CPU 315 6ES7 315-1AF03-0AB0

CPU 315−2 DP 6ES7 315−2AF03−0AB0

6ES7 315−2AG10−0AB0

6ES7 315−2AH14−0AB0

CPU 315−2 PN/DP 6ES7 315−2EG10−0AB0

6ES7 315−2EH13−0AB0

6ES7 315−2EH14−0AB0

CPU 315F−2 DP 6ES7 315−6FF01−0AB0

CPU 315F−2 PN/DP 6ES7 315−2FH10−0AB0

6ES7 315−2FH13−0AB0

6ES7 315−2FJ14−0AB0

CPU 315T−2 DP 6ES7 315−6TG10−0AB0

CPU 316-2 DP 6ES7 316-2AG00-0AB0

CPU 317−2 DP 6ES7 317−2AJ10−0AB0

CPU 317−2 PN/DP 6ES7 317−2EJ10−0AB0

6ES7 317−2EK13−0AB0 / 6ES7 317-2EK14-0AB0

CPU 317F−2 DP 6ES7 317−6FF00−0AB0

6ES7 317−6FF03−0AB0

CPU 317F−2 PN/DP 6ES7 317−2FJ10−0AB0

6ES7 317−2FK13−0AB0 / 6ES7 317-2FK14-0AB0

CPU 317T−2 DP 6ES7 317−6TJ10−0AB0

CPU 318-2 6ES7 318-2AJ00-0AB0

CPU 319−3 PN/DP 6ES7 318−3EL00−0AB0

CPU 319−3 F PN/DP 6ES7 318−3FL00−0AB0

CPU 614 6ES7 614-1AH03-0AB3

2 Requirements for Use

B−10 CP 343-1 Lean for Industrial Ethernet / Manual Part B

Release 09/2009

C79000-G8976-C198-06

Table 2-2 Use of the CP in C7 control systems

C7 Order number

C7−613 6ES7 613−1CA01−0AE03

6ES7 613−1CA02−0AE3

C7−633 DP 6ES7 633−2BF02−0AE03

C7−635 Keys 6ES7 635−2EC01−0AE3

6ES7 635−2EC02−0AE3

C7−635 Touch 6ES7 635−2EB01−0AE03

6ES7 635−2EB02−0AE3

C7−636 Keys 6ES7 636−2EC00−0AE03

6ES7 636−2EC00−0AE3

C7−636 Touch 6ES7 636−2EB00−0AE3

Andere Handbücher für SIMATIC NET S7-CPs

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Netzwerk-Hardware Handbücher

Siemens

Siemens SIMATIC NET S7-400 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5237 Bedienungsanleitung

Siemens

Siemens Connect Box Bedienungsanleitung

Siemens

Siemens RUGGEDCOM ROX II Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 1515 Bedienungsanleitung

Siemens

Siemens Gigaset M 101 Data Bedienungsanleitung

Siemens

Siemens S223 Bedienungsanleitung

Siemens

Siemens NK8000 MP.4.60 Stücklistenhandbuch

Siemens

Siemens 3VL9800-8CA30 Bedienungsanleitung

Siemens

Siemens SIMATIC NET S7-1500 Bedienungsanleitung

Siemens

Siemens SCALANCE S615 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W M766 Series Bedienungsanleitung

Siemens

Siemens SICAM SGU 7XV5676 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN7251 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RX1511 Bedienungsanleitung

Siemens

Siemens WTT662 Series Bedienungsanleitung

Siemens

Siemens 181 Gebrauchsanweisung

Siemens

Siemens ISI EN 50295 Bedienungsanleitung

Siemens

Siemens ESM Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5251 Bedienungsanleitung

Siemens

Siemens HiPath 3000 Bedienungsanleitung

Siemens

Siemens SIMATIC NET Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5114-V-GPS Bedienungsanleitung

Siemens

Siemens SINUMERIK 840Di sl Stücklistenhandbuch

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung