Siemens PSFR-CP41 Anleitung zur Verwendung
Edition April 1999
Fibre Channel to SCSI Router PSFR-CP41
Installing, Starting Up and Maintaining
This manual is printed
on paper treated with
chlorine-free bleach.
Comments…Suggestions…Corrections…
The User Documentation Department would like to know
your opinion on this manual. Your feedback helps us to
optimize our documentation to suit your individual needs.
Fax forms for sendingus your comments are included atthe
back of the manual.
There you will also find the addresses of the relevant User
Documentation Department
Copyright and Trademarks
Copyright © Siemens AG 1999.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
U42093-J-Z716-1-74 Operating Manual
Introducing the PSFR-CP41
The PSFR-CP41 provides connectivity between a Fibre Channel Switched
Fabric (FC-SW) or Arbitrated Loop (FC-AL) and one Fast/Wide/Ultra SCSI bus.
Supported devices include:
Initiator Devices – Fibre Channel and SCSI hosts
Sequential Access Devices – Tape drives
Changer Devices – Tape and Magneto-Optical Libraries
Operating Manual U42093-J-Z716-1-74
Features Introducing the PSFR-CP41
Front panel of the PSFR-CP41
Back panel of the PSFR-CP41
Features
Fibre Channel Features
– Fibre Channel initiator and target modes
– Single 1.0625 Gbps port
– Fibre Channel Arbitrated Loop and Switched Fabric topologies
– Private Loop Direct Attach (PLDA) profile compliant
– Class 3 connection with SCSI-FCP protocol
– Optical GLM
I
0
Power
Fault
LEDs 10 Base-T
Ethernet Serial
SCSI
Ethernet
FC
FibreChannel
Power Entry Module SCSI
U42093-J-Z716-1-74 Operating Manual
Introducing the PSFR-CP41 Features
SCSI Bus Features
– SCSI initiator and target modes
– Single auto-negotiating SCSI bus (Narrow, Wide, Fast, Ultra)
– Ultra Wide SCSI for data transfer up to 40 MBps
– Connection for up to 15 devices
– Simultaneous commands, tagged command queuing and
disconnect/reconnect
– Middle of bus configuration with active, external termination
– SCSI-2 and SCSI-3 protocols
– 68-pin D shell, P type connectors
– Differential
– Disk, tape, optical and changer devices
– SCC, Indexed and Automatic addressing modes
Configuration Features
– Serial RJ-11 connector for terminal access
– Ethernet RJ-45 connector for FTP, Telnet and Web browser access
– Easy field-upgradable firmware
Management Features
– Out-of-band Ethernet TCP/IP
– SNMP with public and private MIB support
Operating Manual U42093-J-Z716-1-74
Specifications Introducing the PSFR-CP41
Specifications
Physical Specifications
– Internal power supply with power switch and detachable power cord
– Fibre Channel activity LED
– SCSI activity LED
– Ethernet activity LED
– Power LED
– Failure LED
– Airflow with internal fan
– Rack mount or desktop enclosure
Physical Dimensions
– Width 43.18cm (17.00 inches)
– Depth 22.82cm (8.98 inches)
– Height 4.31cm (1.70 inches, 1U)
– Weight 3.18 kg (7 lbs)
Operating Environment
–5to40°C
– 5 to 80% Relative Humidity (non-condensing)
Non-operating Environment
– -40 to +55 °C
– 0 to 92% Relative Humidity (non-condensing)
Power
– 100 - 240 VAC, Auto Sensing
– 50/60 Hz, 1.0 Amps
U42093-J-Z716-1-74 Operating Manual
Introducing the PSFR-CP41 PSFR-CP41 Benefits
PSFR-CP41 Benefits
Point-to-Point
Single initiator to single target
Operating Manual U42093-J-Z716-1-74
PSFR-CP41 Benefits Introducing the PSFR-CP41
Single Initiator
Single initiator to multiple targets
Multi-Initiator
Multiple initiators to single or multiple targets
U42093-J-Z716-1-74 Operating Manual
Introducing the PSFR-CP41 PSFR-CP41 Benefits
Availability
With two units, dual loop attachment provides redundancy and no single
point of failure.
Connectivity
SCSI devices may be attached to Fibre Channel storage networks to share
data and increase address space.
Distance
SCSI cable length from hosts to devices is increased from 25m to 10,000m,
facilitating remote or disaster tolerant sites.
Performance
100 Mbytes/sec Fibre Channel (200 Mbytes/sec bi-directional) offers
increased bandwidth when distributing data across multiple SCSI devices.
Reliability
Low error rates, robust error recovery and flow control provide an enterprise
with reliable data delivery.
Scalability
Point-to-point links can be expanded to multi-initiator links supporting inter-
connected servers, tape drives, tape libraries, disk drives and disk arrays.
Flexibility
The PSFR-CP41 allows Fibre Channel initiators to communicate with SCSI
targets, as well as SCSI initiators to communicate with Fibre Channel
targets, simultaneously.
Consolidation
The PSFR-CP41 allowsmultiple servers to share tape drives, tape libraries,
disk drives and disk arrays.
Centralization
The PSFR-CP41 enables existing storage to be moved to a central location
to simplify management and maintenance, and to improve security.
Lower TCO
Improving storage management, maintenance and security can lower Total
Cost of Ownership (TCO) for enterprise storage.
Operating Manual U42093-J-Z716-1-74
How the PSFR-CP41 Works Introducing the PSFR-CP41
How the PSFR-CP41 Works
The PSFR-CP41 acts as a pass-though device that translates Fibre Channel
FCP to and from a SCSI bus so devices on these two types of media can
communicate with each other. It attaches to either a Fibre Channel or SCSI
host, and transfers the command, data, and status information to SCSI or Fibre
Channel targets. The host passes packets to SCSI or Fibre Channel targets as
if the PSFR-CP41 were just another device along the path.
The PSFR-CP41 provides connections for a single SCSI bus and a Fibre
Channel Arbitrated Loop or Switched Fabric. It takes advantage of Fibre
Channel’s ability to encapsulate SCSI protocol packets to allow ahost with a FC
or SCSI adapter to access SCSI or FC peripheral devices transparently over a
FC connection.
Fibre Channel-to-SCSI configuration
The figure shows a Fibre Channel-to-SCSI configuration. Through the PSFR-
CP41 router, any host on the Fibre Channel loop can access thetape drive and
library on the SCSI bus.
Inhaltsverzeichnis
Andere Siemens Netzwerk-Router Handbücher
Siemens
Siemens RUGGEDCOM RS1600F Bedienungsanleitung
Siemens
Siemens SCALANCE M800 Bedienungsanleitung
Siemens
Siemens SCALANCE M874 Bedienungsanleitung
Siemens
Siemens RUGGEDCOM RS900G Bedienungsanleitung
Siemens
Siemens RUGGEDCOM RMC20 Bedienungsanleitung
Siemens
Siemens SIMATIC NET SCALANCE S615 Merkblatt
Siemens
Siemens SpeedStream SS2624 Bedienungsanleitung
Siemens
Siemens PXG3 Series Bedienungsanleitung
Siemens
Siemens gigaset se 105 Bedienungsanleitung
Siemens
Siemens SCALANCE XB-200 Bedienungsanleitung
Siemens
Siemens CL-110 Bedienungsanleitung
Siemens
Siemens 73 82 851 Handbuch
Siemens
Siemens RUGGEDCOM RS910L Bedienungsanleitung
Siemens
Siemens 4100 Series Bedienungsanleitung
Siemens
Siemens RUGGEDCOM i803 Bedienungsanleitung
Siemens
Siemens gigaset SE551 Bedienungsanleitung
Siemens
Siemens FN2012-A1 Leitfaden
Siemens
Siemens RUGGEDCOM RS900 Bedienungsanleitung
Siemens
Siemens Gigaset SE361 WLAN Bedienungsanleitung
Siemens
Siemens RUGGEDCOM RSL910 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise