Siemens SCALANCE XR-100WG Series Bedienungsanleitung

___________________

SIMATIC NET

Industrial Ethernet switches

SCALANCE XR-100WG

Operating Instructions

05/2017

C79000

-G8976-C455-01

Introduction

Safety notices

Description of the device

Installation

Connecting up

Upkeep and maintenance

Technical specifications

Dimension drawings

Approvals

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

C79000-G8976-C455-01

Ⓟ

06/2017 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SCALANCE XR-100WG

Operating Instructions, 05/2017, C79000-G8976-C455-01 3

Introduction

Purpose of the Operating Instructions

These operating instructions support you when installing and connecting up devices of the

SCALANCE XR-100WG product group.

Validity of the Operating Instructions

These operating instructions apply to the following devices:

●SCALANCE XR124WG

Unless mentioned otherwise, the descriptions in these operating instructions refer to all

devices of the SCALANCE XR-100WG product group named above in the section on

validity.

Designations used

Classification

Description

Terms used

Product line The product line includes all devices and variants of all product groups.

If information applies to all product groups within the product line, the

term SCALANCE X-100 is used.

SCALANCE X-100

Product group If information applies to all devices and variants of a product group, the

term SCALANCE XR-100WG is used.

SCALANCE XR-100WG

Device

If information relates to a specific device, the device name is used.

SCALANCE XR124WG

Variant For a variant of the device, the device name has the appropriate variant

added to it in brackets. or the characteristic of the variant.

e.g. SCALANCE XR124WG

(24 VDC) or 24 VDC variant

Further documentation

In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial

Ethernet / PROFINET passive network components", you will find information on other

SIMATIC NET products that you can operate along with the devices of this product line in an

Industrial Ethernet network.

There, you will find among other things optical performance data of the communications

partner that you require for the installation.

Introduction

SCALANCE XR-100WG

4Operating Instructions, 05/2017, C79000-G8976-C455-01

You will find the system manuals here:

●On the data medium that ships with some products:

–Product CD / product DVD

–SIMATIC NET Manual Collection

●On the Internet pages of Siemens Industry Online Support under the following entry IDs:

–27069465 (http://support.automation.siemens.com/WW/view/en/27069465)

Industrial Ethernet / PROFINET Industrial Ethernet System Manual

–84922825 (http://support.automation.siemens.com/WW/view/en/84922825)

Industrial Ethernet / PROFINET - Passive network components System Manual

SIMATIC NET manuals

You will find the SIMATIC NET manuals here:

●On the data medium that ships with some products:

–Product CD / product DVD

–SIMATIC NET Manual Collection

●On the Internet pages of Siemens Industry Online Support

(https://support.industry.siemens.com/cs/ww/en/ps/15247).

SIMATIC NET glossary

Explanations of many of the specialist terms used in this documentation can be found in the

SIMATIC NET glossary.

You will find the SIMATIC NET glossary on the Internet at the following address:

50305045 (http://support.automation.siemens.com/WW/view/en/50305045)

Catalogs

You will find the article numbers for the Siemens products of relevance here in the following

catalogs:

●SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI

●SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog

ST 70

●Industry Mall - catalog and ordering system for automation and drive technology, Online

catalog

(https://eb.automation.siemens.com/goos/WelcomePage.aspx?regionUrl=/en&language=

en)

You can request the catalogs and additional information from your Siemens representative.

Introduction

SCALANCE XR-100WG

Operating Instructions, 05/2017, C79000-G8976-C455-01 5

Unpacking and checking

WARNING

Do not use any parts that show evidence of damage

If you use damaged parts, there is no guarantee that the device will function according to

the specification.

If you use damaged parts, this can lead to the following problems:

•Injury to persons

•Loss of the approvals

•Violation of the EMC regulations

•Damage to the device and other components

Use only undamaged parts.

1. Make sure that the package is complete.

2. Check all the parts for transport damage.

Recycling and disposal

The products are low in pollutants, can be recycled and meet the requirements of the WEEE

directive 2012/19/EU for the disposal of electrical and electronic equipment.

Do not dispose of the products at public disposal sites.

For environmentally friendly recycling and the disposal of your old device contact a certified

disposal company for electronic scrap or your Siemens contact (Product return

(https://support.industry.siemens.com/cs/ww/en/view/109479891)).

Note the different national regulations.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions only form one element of such a concept.

Customer is responsible to prevent unauthorized access to its plants, systems, machines

and networks. Systems, machines and components should only be connected to the

enterprise network or the internet if and to the extent necessary and with appropriate security

measures (e.g. use of firewalls and network segmentation) in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into

account. For more information about industrial security, please visit

http://www.siemens.com/industrialsecurity (http://www.siemens.com/industrialsecurity)

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends to apply product updates as soon as available and to

Introduction

SCALANCE XR-100WG

6Operating Instructions, 05/2017, C79000-G8976-C455-01

always use the latest product versions. Use of product versions that are no longer supported,

and failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://support.industry.siemens.com/cs/ww/en/ps/15247/pm

(https://support.industry.siemens.com/cs/ww/en/ps/15247/pm).

Trademarks

The following and possibly other names not identified by the registered trademark sign ®are

registered trademarks of Siemens AG:

SIMATIC NET, SCALANCE, C-PLUG, OLM

SCALANCE XR-100WG

Operating Instructions, 05/2017, C79000-G8976-C455-01 7

Table of contents

Introduction............................................................................................................................................. 3

1 Safety notices ......................................................................................................................................... 9

2 Description of the device....................................................................................................................... 11

2.1 Product overview ....................................................................................................................11

2.1.1 Accessories.............................................................................................................................11

2.2 Device views ...........................................................................................................................12

2.2.1 Device view of a 24 VDC variant ............................................................................................12

2.2.2 Device view of 240 VAC variant .............................................................................................13

2.3 LED display.............................................................................................................................13

2.3.1 LED "L"....................................................................................................................................13

2.3.2 Port LEDs "P"..........................................................................................................................13

3 Installation ............................................................................................................................................ 15

3.1 Safety notices for installation ..................................................................................................15

3.2 19" rack mounting ...................................................................................................................19

4 Connecting up....................................................................................................................................... 21

4.1 Safety when connecting up.....................................................................................................21

4.2 Industrial Ethernet...................................................................................................................23

4.3 Wiring rules .............................................................................................................................24

4.4 24 VDC power supply .............................................................................................................25

4.5 Power supply 240 VAC ...........................................................................................................26

4.6 Functional ground ...................................................................................................................27

5 Upkeep and maintenance ..................................................................................................................... 29

6 Technical specifications ........................................................................................................................ 31

6.1 Technical specifications of the SCALANCE XR124WG (24 VDC variant) .............................31

6.2 Technical specifications of the SCALANCE XR124WG (240 VAC variant) ...........................32

6.3 Cable lengths ..........................................................................................................................33

6.4 Switching properties................................................................................................................33

6.5 Mechanical stability (in operation) ..........................................................................................34

7 Dimension drawings.............................................................................................................................. 35

A Approvals.............................................................................................................................................. 37

Index..................................................................................................................................................... 43

Table of contents

SCALANCE XR-100WG

8Operating Instructions, 05/2017, C79000-G8976-C455-01

SCALANCE XR-100WG

Operating Instructions, 05/2017, C79000-G8976-C455-01 9

Safety notices

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.

You should also read the safety notices relating to handling in the individual sections,

particularly in the sections "Installation" and "Connecting up".

CAUTION

To prevent injury, read the manual before use.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

WARNING

EXPLOSION HAZARD

Do not open the device when the supply voltage is turned on.

Safety notices when using the device according to Hazardous Locations (HazLoc) and FM.

If you use the device under HazLoc or FM conditions you must also keep to the following

safety notices in addition to the general safety notices for protection against explosion:

This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-

hazardous locations only.

This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations

only.

Safety notices

SCALANCE XR-100WG

10 Operating Instructions, 05/2017, C79000-G8976-C455-01

Andere Handbücher für SCALANCE XR-100WG Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Netzwerk-Router Handbücher

Siemens

Siemens SIMATIC NET SCALANCE M826 Bedienungsanleitung

Siemens

Siemens SINAUT MD741-1 Benutzerhandbuch

Siemens

Siemens SpeedStream 2105 Bedienungsanleitung

Siemens

Siemens E-110 Bedienungsanleitung

Siemens

Siemens se5880 Bedienungsanleitung

Siemens

Siemens CL-010 Bedienungsanleitung

Siemens

Siemens SCALANCE M874 Bedienungsanleitung

Siemens

Siemens PSFR-CP41 Anleitung zur Verwendung

Siemens

Siemens RUGGEDCOM RS416 Bedienungsanleitung

Siemens

Siemens SpeedStream SS2624 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RS900 Bedienungsanleitung

Siemens

Siemens SIMATIC NET RUGGEDCOM RS920W Bedienungsanleitung

Siemens

Siemens SCALANCE MUM853-1 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RS910L Bedienungsanleitung

Siemens

Siemens 4100 Series Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RSG2100 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RMC40 Bedienungsanleitung

Siemens

Siemens gigaset se 105 Bedienungsanleitung

Siemens

Siemens SIMATIC NET RUGGEDCOM RX1400 Bedienungsanleitung

Siemens

Siemens SL2-141 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM i803 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM M2200 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RS416PF Bedienungsanleitung

Siemens

Siemens RUGGEDCOM RX1000 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung