Siemens HEATWELL RDE Series Bedienerhandbuch

Siemens Building Technologies

RDE… Simple Instructions.

Front Panel: Programming Buttons

Programmed Heating

Constant Heating (Manual)

Economy Heating Temperature or OFF

Controls under the cover on the right hand side.

TO SET CLOCK

Press the Clock Button

Adjust to the current time, using the plus and minus buttons

(please note: the clock is in 24 hour time)

Once the time has set push the enter button or wait for 5 seconds.

(The controller will then return to the main screen)

TO SET THE DAY

The day is the Black box’s on the top of the screen with numbers in, Mon= day 1, Tue= day 2 etc

Press the 1… 7 Button, the day it is currently on will flash

Adjust the day by using the plus and minus buttons

Once the correct day is chosen push the enter button or wait for 5 seconds.

TO SET THE HEATING TEMPERATURE

The Heating temperature is the temperature you would like to warm the room up to.

Press the sun button.

Adjust to the required temperature using the plus and minus buttons

Once the desired temperature is chosen push the enter button or wait for 5 seconds.

TO SET THE ECONOMY TEMPERATURE

The Economy Temperature is the lowest temperature you ever want the floor to get to at anytime.

Press the moon button.

Adjust to the required temperature using the plus and minus buttons

Once the desired temperature is chosen push the enter button or wait for 5 seconds.

(This can be made an OFF position by taking the temperature down to OFF. You need to hold the Minus

button for 5 seconds after you get down to the temperature 5 degrees)

For further information contact your underfloor heating installer.

__________________________________________________________

Or contact Siemens NZ Ltd, 09 580 5500 – HVAC Technical Support.

0508 HEATWELL

0508 432 893

Siemens Building Technologies

RDE… Simple Instructions continued.

PROGRAMMING

TO SET THE DAILY TIMES

Move the front vertical slider to the AUTO position.

Press the Blocks button under the panel.

The time setting starts from day 1 at 00.00 in the morning.

The screen will look like this,

Press the moon button for economy heating periods, after you have pushed the moon button you will

automatically advance to the next time period.

Press the sun button for the ON periods, after you have pushed the sun button you will automatically advance

to the next time period.

EXAMPLE - Below is an example of a screen and the heating periods.

If you make a mistake press the blocks button and start again.

When the desired Settings are made push the Enter button , this will save the changes and move you

to day 2 to enter the settings.

Repeat the above steps for days 2-7.

When you are finished, push the Blocks button to return to the main screen.

To check your programs push the blocks button and using the 1…7 button move through the days.

Batteries. (Battery symbol)

If you see the battery symbol on your screen (in the bottom left hand corner) it means your batteries are

getting flat. Remove the batteries and replace with Triple A (AAA) Alkaline batteries. (The batteries are found

in the bottom left hand corner, they slide down in a case) Please note: not all units have batteries.

For further information contact your underfloor heating installer.

__________________________________________________________

Or contact Siemens NZ Ltd, 09 580 5500 – HVAC Technical Support.

0508 HEATWELL

0508 432 893

Inhaltsverzeichnis

Andere Siemens Temperaturregler Handbücher

Siemens

Siemens RVL470 Bedienerhandbuch

Siemens

Siemens REV24 Bedienungsanleitung

Siemens

Siemens Landis & Staefa REV11 Series Bedienungsanleitung

Siemens

Siemens RLE132 Bedienungsanleitung

Siemens

Siemens REV24RF Bedienungsanleitung

Siemens

Siemens REV23 Bedienungsanleitung

Siemens

Siemens RDF110 Bedienungsanleitung

Siemens

Siemens RDX33 Series Bedienungsanleitung

Siemens

Siemens SITRANS TS Series Bedienungsanleitung

Siemens

Siemens REV23 Bedienungsanleitung

Siemens

Siemens Polygyr-Compact Betriebsanleitung

Siemens

Siemens BPS242RF Bedienungsanleitung

Siemens

Siemens AQR2531 Series Bedienungsanleitung

Siemens

Siemens Free Energy Band RCU61U Betriebsanleitung

Siemens

Siemens 5TC9774-4 Series Bedienungsanleitung

Siemens

Siemens RDE10 Series Bedienungsanleitung

Siemens

Siemens Synco 900 Leitfaden

Siemens

Siemens RCC10U Betriebsanleitung

Siemens

Siemens REV24RF Montageanleitung

Siemens

Siemens RDX42.22U Betriebsanleitung

Siemens

Siemens REA23 Bedienungsanleitung

Siemens

Siemens REV34 Bedienungsanleitung

Siemens

Siemens RDX Series Bedienungsanleitung

Siemens

Siemens 2200 Series Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema

Opt Lasers

Opt Lasers TEC-8A-24V-PID-HC Bedienungsanleitung

Vaillant

Vaillant VR 92/3 Bedienungsanleitung