Siemens Panel PC 670 Technisches Dokument

Preface, Table of Contents

Product Overview 1

Description of Device 2

Mounting 3

Maintenance 4

Remote Mount Form Factor 5

Appendices

Technical Data, Keyboard Table A

ESD Guidelines B

Index

Edition 07/02

Panel PC 670 / 870

Operating Unit

Equipment Manual

SIMATIC PC

This manual contains information which you must observe for your personal safety and to

prevent material damage. The information is denoted by a warning triangle and is differen-

tiated as follows, depending on the degree of danger:

!Danger

indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

!Warning

indicates a potentially hazardous situation which, if not avoided, could result in death

or serious injury.

!Caution

used with the safety alert symbol indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

Caution

used without the safety alert symbol indicates a potentially hazardous situation which, if

not avoided, may result in property damage.

Notice

indicates a situation which, if not avoided, could give rise to an undesirable result or

state.

Note

is an important piece of information about the product, the handling of the product or a

particular part of the documentation to which attention is to be drawn.

Only qualified personnel are permitted to start up and operate the device. Qualified

personnel for the purposes of the safety information in this manual are persons who

hold the necessary authorization to install, ground and label devices, systems and cir-

cuits in accordance with the standards of safety engineering.

Please note the following:

!Warning

The device may only be used for the application cases specified in the catalog and the

technical description and may only be used in combination with third-party equipment

and components recommended or approved by Siemens.

Startup must not take place until it is established that the machine which is to

accommodate this component is in conformity with the guideline 98/37 EC.

Appropriate transport, and appropriate storage, installation and assembly, as well as

careful operation and maintenance, are required to ensure that the product operates

perfectly and safely.

Safety information

Qualified personnel

Correct usage

You will find the registered trademarks of Siemens AG in the preface.

The remaining marks used in this publication (or on the CD) may be

trademarks, the use of which by third parties for their own purposes

could violate the rights of the owner.

Editor and Publisher: A&D PT1

Trademarks

Impressum

We have checked the content of this publication for compliance with the

described hardware and software. However, discrepancies cannot be

excluded, with the result that we cannot guarantee total compliance. The

information in this publication is, however, checked regularly, and any

necessary corrections are included in the following editions. We welcome any

suggestions for improvement.

The transmission and reproduction of this documentation and the exploitation

and communication of its contents are not permitted without express

authority. Offenders will be liable for compensation for damage. All rights

reserved, especially in the case of the granting of a patent or registration of a

utility model or design

Siemens AG

Automation & Drives

SIMATIC Human Machine Interface

Postfach 4848, D-90327 Nürnberg ESiemensAG 2002

Subject to technical changes.

Siemens Aktiengesellschaft Edition 07/02

SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual

Edition 07/02

Preface

Purpose of the manual

This manual contains information which you require when using the operating unit of

the SIMATIC Panel PC 670 or PC 870. With this information you can:

Sbecome acquainted with the functions and components of the operating unit,

Sseparate the operating unit from the computing unit,

Sinstall the Panel PC

1. Centrally (installed with operating unit and computing unit integrated), or

2. in remote mount form factor (operating unit and computing unit installed separa-

tely, refer to Chapter 5)

Sperform upgrades and install spare parts, providing you fulfill the necessary condi-

tions.

Target group

The manual is supplied as an electronic document in PDF-format together with the SI-

MATIC Panel PC 670 or PC 870 and has been written for the following readers:

Susers who commission the device themselves or work with the Panel PC

(editing, testing),

Sservice and maintenance engineers who perform conversions and install

upgrades or spare parts.

Preface

vi SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual

Edition 07/02

Documentation

SCommissioning Instructions

The Commissioning Instructions are supplied as a paper document. The document

is intended for commissioning engineers and system administrators.

The Commissioning Instructions describe briefly the most important steps for com-

missioning the hardware and software.

SSIMATIC Panel PC 670/PC 870 Operating Unit Equipment Manual

The manual is supplied on CD together with the SIMATIC Panel PC 670 or

PC 870 as an electronic document in PDF-format. It is intended for the

commissioning engineers and service and maintenance technicians who install the

Panel PC and perform maintenance work on the operating unit.

Furthermore, the Equipment Manual provides an overview of how to use the con-

trols of the operating unit.

SSIMATIC Panel PC 670 Computing Unit Equipment Manual

The manual is supplied on CD together with the SIMATIC Panel PC 670 as an

electronic document in PDF-format. It is intended for the commissioning engineers,

and service and maintenance technicians who install upgrades or perform error

analyses on the computing unit.

SSIMATIC Panel PC 870 Computing Unit Equipment Manual

The manual is supplied on CD together with the SIMATIC Panel PC 870 as an

electronic document in PDF-format. It is intended for the commissioning engineers,

and service and maintenance technicians who install upgrades or perform error

analyses on the computing unit.

Notation

The following conventions are used in this manual:

Motor off Text that is displayed on the operating unit is printed in

Courier typeface.

Variable Symbolic names that stand for variable values appearing on

the screen are printed in Courier italic typeface.

Screens Selectable functions are printed in standard italic typeface.

ESC Names of keys and buttons are shown in a different typeface.

Preface

vii

SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual

Edition 07/02

History

Edition Comments

03/00 Initial release of the equipment manual SIMATIC Panel PC 670 –

Operating Unit.

07/01 Initial release of the equipment manual SIMATIC Panel PC 670/870 –

Operating Unit.

12/01 Extension to include the ”remote mount form factor”option of the SI-

MATIC Panel PC 670/870 –operating Unit equipment manual.

07/02 Technical update of the SIMATIC Panel PC 670/870 –Operating unit

equipment manual.

Trademarks

The following names are registered trademarks of Siemens AG:

SSIMATICR

SSIMATIC HMIR

SHMIR

SProToolR

SProTool/LiteR

SProTool/ProR

SSIMATIC Multi PanelR

SSIMATIC Multifunctional PlatformR

SMP 270R

SProAgentR

Preface

viii SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual

Edition 07/02

Automation and Drives, Service & Support

Available round the clock, worldwide:

SIMATIC Hotline

Johnson City

Nuremberg

Singapore

Worldwide (Nuremberg)

Technical Support

(FreeContact)

Local time: Mon.-Fri. 8:00 to 17:00

Telephone: +49 (180) 5050-222

Fax: +49 (180) 5050-223

E-Mail: techsupport@

ad.siemens.de

GMT: +1:00

Worldwide (Nuremberg)

Technical Support

(fee-based, only with SIMATIC

Card)

Local time: Mon.-Fri. 0:00 to 24:00

Telephone: +49 (911) 895-7777

Fax: +49 (911) 895-7001

GMT: +01:00

Europe / Africa (Nuremberg)

Authorization

Local time: Mon.-Fri. 8:00 to 17:00

Telephone: +49 (911) 895-7200

Fax: +49 (911) 895-7201

E-Mail: authorization@

nbgm.siemens.de

GMT: +1:00

America (Johnson City)

Technical Support and

Authorization

Local time: Mon.-Fri. 8:00 to 19:00

Telephone: +1 423 461-2522

Fax: +1 423 461-2289

E-Mail: simatic.hotline@

sea.siemens.com

GMT: –5:00

Asia / Australia (Singapore)

Technical Support and

Authorization

Local time: Mon.-Fri. 8:30 to 17:30

Telephone: +65 740-7000

Fax: +65 740-7001

E-Mail: simatic.hotline@

sae.siemens.com.sg

GMT: +8:00

The languages spoken by the SIMATIC Hotlines are generally German and English,

the Authorization Hotline is also provided in French, Italian and Spanish.

Preface

SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual

Edition 07/02

SIMATIC Customer Support Online Services

The SIMATIC Customer Support team offers you substantial additional information

about SIMATIC products via its online services:

SGeneral current information can be obtained

–in the Internet unter

http://www.siemens.com/simatic

SCurrent Product Information leaflets, FAQs (Frequently Asked Questions),

Downloads, Tips and Tricks can be obtained

–in the Internet under

http://www.siemens.com/automation/service&support

Training Center

Siemens offers a number of training courses to familiarize you with the SIMATIC S7

automation system. Please contact your regional training center or our central training

center in D 90327 Nuremberg, Germany for details.

Telephone: +49 (911) 895–3200

Internet: http://www.sitrain.com

E-Mail: [email protected]

Other Sources of Assistance

In case of technical queries, please contact the Siemens representatives in the

subsidiaries and branches responsible for your area.

The addresses can be found:

Sin the Siemens Catalogue ST 80

Sin the Internet under

http://www.siemens.com/automation/partner

Sin the Interactive Catalogue CA01

http://www.siemens.com/automation/ca01

Preface

xSIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual

Edition 07/02

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Touchscreen Handbücher

Siemens

Siemens Simatic PC Panel PC 870 Installationshandbuch

Siemens

Siemens 6AV3991-1AJ02-0AB0 Technisches Dokument

Siemens

Siemens Simatic PC Panel PC 870 Technisches Dokument

Siemens

Siemens SIMATIC HMI TP1200 Comfort Bedienungsanleitung

Siemens

Siemens SIMATIC HMI TP 170A Technisches Dokument

Siemens

Siemens POL8T2.40/STD Bedienerhandbuch

Siemens

Siemens SIMATIC WinCC V11 Benutzerhandbuch

Siemens

Siemens GAMMA instabus UP 588/12 Service-Handbuch

Siemens

Siemens SIMATIC Panel PC IL 77 Bedienungsanleitung

Siemens

Siemens SIMATIC LS120 Bedienungsanleitung

Siemens

Siemens Climatix POL8T1.4X/STD Bedienerhandbuch

Siemens

Siemens SIMATIC PC 670 V2 Bedienungsanleitung

Siemens

Siemens SIMATIC TP 270 Bedienungsanleitung

Siemens

Siemens Desigo Touch Series Installations- und Betriebshandbuch

Siemens

Siemens SIMATIC HMI series Bedienungsanleitung

Siemens

Siemens SIMATIC IPC677D Bedienungsanleitung

Siemens

Siemens SIMATIC INOX Series Administratorhandbuch

Siemens

Siemens SIMATIC SCD1900 Bedienungsanleitung

Siemens

Siemens UP 588 Bedienungsanleitung

Siemens

Siemens SIMATIC OP 77B Bedienungsanleitung

Siemens

Siemens SIMATIC PC 670 Technisches Dokument

Siemens

Siemens SIMATIC KP400 Comfort Bedienungsanleitung

Siemens

Siemens TP27 Technisches Dokument

Siemens

Siemens UP 588/12 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung