Siemens FT2080 Leitfaden

A6V10462660_en--_a

Building Technologies

2015-09-10 Control Products and Systems

FT2080

Fire terminal (Touch)

Mounting

Installation

Legal notice

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

Legal notice

Technical specifications and availability subject to change without notice.

Transmittal, reproduction, dissemination and/or editing of this document as well as

utilization of its contents and communication thereof to others without express

authorization are prohibited. Offenders will be held liable for payment of damages.

All rights created by patent grant or registration of a utility model or design patent

are reserved.

Issued by:

Siemens Switzerland Ltd.

Building Technologies Division

International Headquarters

Gubelstrasse 22

CH-6301 Zug

Tel. +41 41 724-2424

www.siemens.com/buildingtechnologies

Edition: 2015-09-10

Document ID: A6V10462660

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

Table of contents

1Setup of fire terminal (Touch) FT2080 ...........................................................4

2Installation in 19" pedestal housing of the FC2080.......................................6

3Installation in housing (standard)..................................................................9

4Installation in rear panel (FT2080) FHA2039................................................10

5Installation in desktop housing (FT2080) FHA2040 ....................................15

6Technical data...............................................................................................21

1Setup of fire terminal (Touch) FT2080

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

1Setup of fire terminal (Touch) FT2080

Rear panel fire terminal (Touch) FT2080

1 Support plate

2 Front indicator (Touch) FTO2010

3 PMI & mainboard FCM2027

4 4x mounting hole operating unit

5 Shield plate above carrier (CPU)

6 Hinges for wall housing

Setup of fire terminal (Touch) FT2080 1

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

Arrangement of components

Components on the fire terminal (Touch) FT2080, without cover cap

1 Front indicator (Touch) FTO2010

2 Main network module (SAFEDLINK) on X13, optional

3 License key, optional

4 Slot 1 [SER_OPT1] for the first serial module at X14, optional

5 Slot 2 [SER_OPT2] for the second serial module at X19, optional

6 Degraded mode network module (SAFEDLINK) on X12, optional

7 CPU module (CORVUS) FCC2009

8 Carrier for CPU modules FTO2014

9 CPU module (MPC8248) FCC2006

10 PMI & mainboard FCM2027

11 Slot X11 for serial module. Not required for FT2080

Both slots X14 and X19 can hold the RS232 or RS485 serial module.

2Installation in 19" pedestal housing of the FC2080

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

2Installation in 19" pedestal housing of the

FC2080

The installation instructions described below apply to all operating units.

Before an operating terminal is installed, the following components must first be

installed on the operating unit.

lNetwork module (SAFEDLINK) FN2001-A1 with ES ≥12, for connecting to the

FC2080

lAdapter and connection cable for the power supply

– Supplied with processor unit (19", FC2080) FCC2002-A1

Preparing the operating unit

The network module (SAFEDLINK) FN2001-A1 must be installed on connector X13

of the operating unit (main module slot).

Installing the required options taking operating unit FCM2028-A1 as an example

Installation in 19" pedestal housing of the FC2080 2

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

1 Operating unit

2 Flange with threaded holes for securing the module

3 Connector strip X13 for network module

4 Network module (SAFEDLINK) FN2001-A1 with ES ≥12

5 2x fixing screw

6 PMI & mainboard FCM2027

7 Adapter for power supply (including ribbon cable)

8 Connector strip X3 peripheral data bus connection

1. Plug the network module (SAFEDLINK) (4) into connector X13 (3) of the

operating unit (1).

2. Secure the module to mounting flange (2) with both screws (5). Ensure that it is

secured correctly to avoid interrupts.

3. Plug the adapter (7) into connector X3 (8) of the PMI & mainboard (6) so

inscription 'TOP' is at the top.

Installing operating unit

12 3

Mounting operating terminal in door, taking operating unit FCM2028-A1 as an example

1 Inside of door

2 Opening for operating unit

3 4x welded threaded bolt

4 4x mounting hole in the operating unit

5 4x fixing screw

1. Remove the cover plate (2) by removing the four nuts (5).

2. Place the mounting holes (4) of the operating unit on the four threaded bolts (3)

and screw the operating unit down with the four nuts (5).

2Installation in 19" pedestal housing of the FC2080

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

3. The operating add-ons in the bottom window openings are installed in the

same way.

4. Wire up the operating unit and operating add-ons according to the following

wiring instructions.

Wiring the fire terminal (Touch)

Wiring the fire terminal (Touch) with FC2080

1 Ribbon cable for FC2080 system supply to card cage (CPU) X30

2 FCnet connection to card cage (CPU) X11/X12

3X3 connection to network module (SAFEDLINK) to PMI & mainboard

FCM2027

4 Inside of door (section view)

5 Fire terminal (Touch) FT2080

6 Adapter for flat cable of the supply

B2A2B1

1234 1234

X11

X12

1234

FCC2003

FCM20xx

FC2080

FCnet

FN2010 FN2010 FN2001

Door

Example of FCnet wiring of X3 on PMI & mainboard FCM2027 of the fire terminal (Touch)

* The FCnet connection from X11 to X12 on the card cage (CPU) FCC2003 is

wired up in advance at the factory.

Installation in housing (standard) 3

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

3Installation in housing (standard)

Installation of fire terminal in the housing (standard) FH2002

1 Mains connection terminals

2 Power supply unit (70 W) FP2015

3 Rear panel (standard)

4 Fire terminal board FTI2001

5 Wiring FCnet/SAFEDLINK

6 Network module (SAFEDLINK) FN2001

7 Fire terminal (Touch) FT2080

X3 Ribbon cable connection from the fire terminal (Touch) to the fire terminal

board

X1 Supply input for fire terminal board

You will find detailed information on wiring the 'fire terminal board FTI2001' and the

'network module (SAFEDLINK) FN2001' in document Product Data 008837.

4Installation in rear panel (FT2080) FHA2039

Building Technologies A6V10462660_en--_a

Fire Safety 2015-09-10

4Installation in rear panel (FT2080) FHA2039

The rear panel (FT2080) can be used for installation in a desk or installation in a

third-party housing. Installing the rear panel (FT2080) in a third-party housing

guarantees the required EMC protection. The installation sequence is as follows,

due to the restricted space:

lInstalling the fire terminal board FTI2001

lWiring the fire terminal (Touch)

lInstalling the fire terminal (Touch)

lInstalling the rear panel (FT2080) in a desktop

View of rear panel (FT2080) FHA2039

Rear panel (FT2080) FHA2039

1 Rear panel (FT2080) FHA2039

2 250 V EMC filter, 3 A with plug-in contacts

3 Clamping bracket with screw for ground connection

Andere Handbücher für FT2080

Inhaltsverzeichnis

Andere Siemens Touch-Terminal Handbücher

Siemens

Siemens SENTRON 3TW1CG20PT Bedienungsanleitung

Siemens

Siemens SiPass Entro Merkblatt

Siemens

Siemens FT2080 Leitfaden

Siemens

Siemens 3VF8 Bedienungsanleitung

Siemens

Siemens 3VL9400-4RA00 Bedienungsanleitung

Siemens

Siemens Climatix HMI-DM Bedienerhandbuch

Siemens

Siemens A5E01621433-01 Bedienungsanleitung

Siemens

Siemens AlgoPilot B3Q661 Bedienungsanleitung

Siemens

Siemens 3UF1900-1KA00 Bedienungsanleitung

Siemens

Siemens 3RK1922-3BA00 Bedienungsanleitung

Siemens

Siemens FT2080 Bedienungsanleitung

Siemens

Siemens SIMATIC NET Bedienungsanleitung

Siemens

Siemens 8WH6000-0 0 Series Bedienungsanleitung

Siemens

Siemens FT2010 Bedienungsanleitung

Siemens

Siemens FT2040 Bedienungsanleitung

Siemens

Siemens DESIGIO 30 Bedienungsanleitung

Siemens

Siemens VT9324-4TD30 Bedienungsanleitung

Siemens

Siemens 3VM9 0-0WC00 Series Bedienungsanleitung

Siemens

Siemens 3VT9100-4TC30 Bedienungsanleitung

Siemens

Siemens FTI2001-U1 Bedienungsanleitung

Siemens

Siemens 3VL9400-8BH01 Bedienungsanleitung

Siemens

Siemens TC35 Bedienungsanleitung

Siemens

Siemens Simatic RTU303xC Series Bedienungsanleitung

Siemens

Siemens MICROMASTER 420 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung