Siemens SITRANS LR260 Gebrauchsanweisung

Quick Start Manual January 2008

LR260 (HART)

sitrans

IQ300IX.fm Page 5 Tuesday, October 2, 2001 1:43 PM

7ML19985XH81 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-1

mmmmm

English

SITRANS LR260 (HART) Quick Start Manual

This manual outlines the essential features and functions of the SITRANS LR260 (HART). We

strongly advise you to acquire the detailed version of the manual so you can use your device to

its fullest potential. The complete manual can be downloaded from the SITRANS LR260

product page of our web site at: www.siemens.com/LR260. The printed manual is available

from your local Siemens Milltronics representative.

Questions about the contents of this manual can be directed to:

Siemens Milltronics Process Instruments Inc.

1954 Technology Drive, P.O. Box 4225

Peterborough, Ontario, Canada, K9J 7B1

Email: [email protected]om

MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments Inc.

Technical Support

Support is available 24 hours a day.

To find your local Siemens Automation Office address, phone number, and fax number, go to:

www.siemens.com/automation/partner:

• Click on the tab Contacts by Product then find your product group (+Process Automation

> +Process Instrumentation > +Level Measuring Instruments).

• Select the team Technical Support. Click on Next.

• Click on a continent, then a country, followed by a city. Click on Next.

For on-line technical support go to: www.siemens.com/automation/support-request

• Enter the device name (SITRANS LR260) or order number, then click on Search, and

select the appropriate product type. Click on Next.

• Enter a keyword describing your issue. Then either browse the relevant documentation,

or click on Next to email a description of your issue to Siemens Technical Support staff.

Siemens A&D Technical Support Center: phone +49 180 50 50 222

fax +49 180 50 50 223

Process Instruments Inc. 2008.

Disclaimer of Liability

We encourage users to purchase autho-

rized bound manuals, or to view elec-

tronic versions as designed and

authored by Siemens Milltronics Process

Instruments Inc. Siemens Milltronics

Process Instruments Inc. will not be

responsible for the contents of partial or

whole reproductions of either bound or

electronic versions.

While we have verified the contents of this manual

for agreement with the instrumentation described,

variations remain possible. Thus we cannot guar-

antee full agreement. The contents of this manual

are regularly reviewed and corrections are

included in subsequent editions. We welcome all

suggestions for improvement.

Technical data subject to change.

Page EN-2 SITRANS LR260 (HART) – QUICK START MANUAL 7ML19985XH81

mmmmm

English

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to

protect the product and the connected equipment. These warning notices are accompanied by

a clarification of the level of caution to be observed.1

FCC Conformity

US Installations only: Federal Communications Commission (FCC) rules

SITRANS LR260

SITRANS LR260 is a 2-wire 25 GHz pulse radar level transmitter for continuous monitoring of

solids in storage vessels including extreme levels of dust and high temperatures, to a range of

30 m (98.4 ft).

The instrument consists of an electronic component coupled to a horn antenna with an

integral Easy Aimer and flange for quick and easy positioning. A dust cover or air purging are

available as options.

SITRANS LR260 supports HART communication protocol, and SIMATIC PDM software. Signals

are processed using Process Intelligence which has been field-proven in over 1,000,000

applications worldwide (ultrasonic and radar).

WARNING: relates to a caution symbol on the product, and means that failure to

observe the necessary precautions can result in death, serious injury, and/or

considerable material damage.

WARNING1: means that failure to observe the necessary precautions can result

in death, serious injury, and/or considerable material damage.

Note: means important information about the product or that part of the operating manual.

1. This symbol is used when there is no corresponding caution symbol on the product.

WARNING: Changes or modifications not expressly approved by Siemens

Milltronics could void the user’s authority to operate the equipment.

Notes:

• This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

• This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference to radio communications, in which case the user will

be required to correct the interference at his own expense.

WARNING: SITRANS LR260 is to be used only in the manner outlined in this manual,

otherwise protection provided by the equipment may be impaired.

7ML19985XH81 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-3

mmmmm

English

Specifications

For a complete listing, see the SITRANS LR260 (HART) Instruction Manual. For Approvals

information, please refer to the device nameplate and the process device tag.

Ambient/Operating Temperature

Power

• Maximum 30 V DC • 4 to 20 mA

Approvals

•General CSA

US/C, FM, CE

• Radio Europe (R&TTE), FCC, Industry Canada, C-TICK

• Hazardous CSA/FM Class II, Div. 1, Groups E, F, G, Class III

ATEX II 1D, 1/2D, 2D Ex tD A20 IP67, IP68 T100 deg C

Notes:

• Process temperature and pressure capabilities are dependent upon information on the

process device tag. The reference drawing listed on the tag can be downloaded from the

Siemens website at: www.siemens.com/LR260.

• See

Loop power

on page 18, for more details.

Nominal 24 V DC with max. 550 Ohm loop resistance. (Check the device

nameplate for the characteristics of the device, and confirm the loop load.)

Note: Use appropriate conduit seals to maintain IP or NEMA rating.

ambient temperature

–40 °C to +80 °C (–40 °F to +176 °F)

process temperature (with FKM O-ring)

non-pressure version: –40 to +200 °C (–40 to +392 °F)

pressure rated version: –40 to +80 °C (–40 to +176 °F)

Page EN-4 SITRANS LR260 (HART) – QUICK START MANUAL 7ML19985XH81

mmmmm

English

Pressure Application

Installation

WARNINGS:

• This product is designated as a Pressure Accessory per Directive 97 / 23 / EC, and

is not intended for use as a safety device.

• Do not attempt to loosen, remove, or disassemble process connection or

instrument housing while vessel contents are under pressure.

• Improper installation may result in loss of process pressure.

1. The process pressure boundary assembly comprises the components that act as a barrier against

pressure loss from the process vessel: that is, the combination of process connection body and

emitter, but normally excluding the electrical enclosure.

WARNINGS:

• Installation shall only be performed by qualified personnel and in

accordance with local governing regulations.

• Materials of construction are chosen based on their chemical compatibility (or

inertness) for general purposes. For exposure to specific environments, check

with chemical compatibility charts before installing.

Notes:

• For European Union and member countries, installation must be according to ETSI EN

302372.

• The Process Device Tag shall remain with the process pressure boundary assembly1. In

the event the device package is replaced, the Process Device Tag shall be transferred to

the replacement unit.

• SITRANS LR260 units are hydrostatically tested, meeting or exceeding the requirements

of the ASME Boiler and Pressure Vessel Code and the European Pressure Equipment

Directive.

7ML19985XH81 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-5

mmmmm

English

Installation guidelines

• Provide easy access for viewing the display and programming via the hand programmer.

• Provide an environment suitable to the housing rating and materials of construction.

• Provide a sunshield if the device will be mounted in direct sunlight.

Nozzle design

• The end of the horn must protrude a minimum of

10 mm (0.4”) to avoid false echoes being reflected

from the nozzle.

• Optional antenna extensions: 100 mm (3.93"),

200 mm (70.9"), 500 mm (19.69"), 1000 mm (39.4")1

Nozzle location

• Keep emission cone free of

interference from ladders, pipes,

I-beams or filling streams.

• Avoid central locations on tall,

narrow vessels.

• Align the antenna so that the

radar cone is perpendicular to the

surface of the monitored material,

if possible.

Mounting instructions

1. Extensions are not recommended for applications where there may be excessive visible vibration. Please consult

factory for more information.

Note: Beam angle depends on horn

size.

WARNING: The user is responsible for the selection of bolting and gasket materials

which will fall within the limits of the flange and its intended use, and which are

suitable for the service conditions.

min. clearance:

10 mm (0.4")

beam angle:

2" horn = 15°

3" horn = 10°

4" horn = 8°

emission

cone

min. 1 m (39")

Page EN-6 SITRANS LR260 (HART) – QUICK START MANUAL 7ML19985XH81

mmmmm

English

Wiring

Power

Connecting SITRANS LR260

1. Use a 2 mm Allen key to loosen the lid-lock set screw. Then using a screwdriver for

leverage if necessary, unscrew the cover.

2. Strip the cable jacket for approximately 70 mm (2.75") from the end of the cable, and

thread the wires through the gland.

3. Connect the wires to the terminals as shown: the polarity is identified on the terminal

block.

4. Ground the instrument according to local regulations.

5. Tighten the gland to form a good seal.

WARNINGS:

The DC input terminals shall be supplied from a source providing electrical

isolation between the input and output, meeting the applicable safety

requirements of IEC 61010-1.

All field wiring must have insulation suitable for rated voltages.

WARNINGS:

• Check the device nameplate and process device tag, to verify the approval rating.

• Use appropriate conduit seals to maintain IP or NEMA rating.

• Read

Instructions specific to hazardous area installations

on page 8.

Notes:

• For detailed wiring instructions, please refer to the full Instruction Manual.

• Use twisted pair cable: AWG 22 to 14 (0.34 mm² to 2.5 mm²).

• Separate cables and conduits may be required to conform to standard instrumentation

wiring practices, or electrical codes.

2 mm lid-lock

set screw.

cable shield

(if used)

7ML19985XH81 SITRANS LR260 (HART) – QUICK START MANUAL Page EN-7

mmmmm

English

Connecting HART

Typical PLC/mA configuration with HART

Wiring setups for hazardous area installations

The nameplates shown are typical examples. In all cases, check the nameplate on your device,

and confirm the approval rating

active PLC

HART modem

SITRANS LR260

power

supply

Notes:

• Depending on the system

design, the power supply may

be separate from the PLC, or

integral to it.

• Loop resistance (total of cable

resistance plus 250 Ohm

[resistor]) must be less than

550 Ohm for the device to

function properly.

R= 250 Ω

HART

communicator

Page EN-8 SITRANS LR260 (HART) – QUICK START MANUAL 7ML19985XH81

mmmmm

English

Instructions specific to hazardous area installations

(Reference European ATEX Directive 94/9/EC, Annex II, 1.0.6)

The following instructions apply to equipment covered by certificate number Sira07ATEX9256X:

1. For use and assembly and details of marking/coding, refer to the main instructions.

2. The equipment is certified for use as Category 1D, 1/2D and 2D equipment and may be

used in hazardous zones 20, 21 and 22 with dusts.

3. This equipment has a maximum surface temperature of T100 C (in an 80°C ambient).

Refer to the applicable code of practice for selection of this equipment with respect to

specific dust ignition temperatures.

4. The equipment is certified for use in an ambient temperature range of -40 C to 80 C.

5. The equipment has not been assessed as a safety related device (as referred to by

Directive 94/9/EC Annex II, clause 1.5).

6. Installation and inspection of this equipment shall be carried out by suitably trained and

authorized personnel in accordance with the applicable code of practice.

7. The equipment shall be installed such that the supply cable is protected from mechanical

damage. The cable shall not be subjected to tension or torque. The equipment

manufacturer is not responsible for providing the supply cable.

8. Repair of this equipment shall be carried out by suitably trained and authorized personnel

in accordance with the applicable code of practice.

9. The equipment shall be supplied with an input voltage not exceeding 30Vdc. The source

shall provide electrical isolation between its input and output, meeting the applicable

safety requirements of IEC 61010-1.

SPECIAL CONDITIONS FOR SAFE USE

The 'X' suffix to the certificate number relates to the following special condition(s) for safe use:

• Unused cable entries shall be fitted with blanking elements that can only be removed

with the aid of a tool.

• Any glands, conduit entry devices or blanking elements fitted to the equipment shall be

suitable for use in the presence of combustible dusts and certified as such by a notified

body; the installation of these devices shall not compromise the IP6X rating of the

equipment enclosure.

• For applications that use the purge facility, the user shall provide a means to ensure that

combustible dust from the hazardous area cannot enter the purge supply in such a way

as to compromise the area classification.

Andere Handbücher für SITRANS LR260

Inhaltsverzeichnis

Sprachen:

Andere Siemens Sender Handbücher

Siemens

Siemens SITRANS TH400 Bedienungsanleitung

Siemens

Siemens 7MF8*24 Series Administratorhandbuch

Siemens

Siemens SITRANS P 7MF4232 Bedienungsanleitung

Siemens

Siemens SITRANS P500 Administratorhandbuch

Siemens

Siemens SITRANS P300 Bedienungsanleitung

Siemens

Siemens 7ML5431 Bedienungsanleitung

Siemens

Siemens SITRANS LR260 Bedienungsanleitung

Siemens

Siemens SITRANS L Bedienungsanleitung

Siemens

Siemens SITRANS LR260 Bedienungsanleitung

Siemens

Siemens Sitrans Probe LR Gebrauchsanweisung

Siemens

Siemens SITRANS LR260 Bedienungsanleitung

Siemens

Siemens DS III PROFIsafe Series Bedienungsanleitung

Siemens

Siemens SITRANS P250 Bedienungsanleitung

Siemens

Siemens SITRANS FUS060 HART Bedienungsanleitung

Siemens

Siemens Sitrans LR200 Administratorhandbuch

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens SITRANS 7MF1570 Bedienungsanleitung

Siemens

Siemens Sitrans LR250 Bedienungsanleitung

Siemens

Siemens SITRANS LR560 Gebrauchsanweisung

Siemens

Siemens Sitrans LR200 Bedienungsanleitung

Siemens

Siemens SITRANS P220 Administratorhandbuch

Siemens

Siemens SITRANS 7MF03.0 Administratorhandbuch

Siemens

Siemens SITRANS TH100Slim Administratorhandbuch

Siemens

Siemens SITRANS P series Administratorhandbuch

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung