Siemens SCALANCE W774-1 Bedienungsanleitung

SCALANCE W770/W730

___________________

SIMATIC NET

Industrial Wireless LAN

SCALANCE W774-1/W734-1

Operating Instructions

09/2015

C79000

-G8976-C325-06

Information on the Internet

Introduction

Description

Mounting

Connection

Technical data

Dimension drawings

Approvals

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

C79000-G8976-C325-06

Ⓟ

04/2016 Subject to change

ll rights reserved

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SCALANCE W774-1/W734-1

Operating Instructions, 09/2015, C79000-G8976-C325-06 3

Contents

1 Information on the Internet ...................................................................................................................... 5

2 Introduction............................................................................................................................................. 7

2.1 Information on the Operating Instructions ................................................................................7

2.2 Structure of the type designation ..............................................................................................8

2.3 Security information ..................................................................................................................8

3 Description.............................................................................................................................................. 9

3.1 Components of the product ......................................................................................................9

3.2 LED display...............................................................................................................................9

3.3 Reset button............................................................................................................................11

4 Mounting............................................................................................................................................... 13

4.1 Wall mounting .........................................................................................................................14

4.2 Installing on an S7-300 standard rail ......................................................................................16

4.3 Installing on an S7-1500 standard rail ....................................................................................17

4.4 Installing on a DIN rail / removing...........................................................................................18

5 Connection ........................................................................................................................................... 21

5.1 Lightning protection, power supply and grounding .................................................................21

5.2 Power supply ..........................................................................................................................25

5.3 Ethernet ..................................................................................................................................28

5.4 Suitable cables for power supply and Ethernet ......................................................................30

5.5 Antenna connectors ................................................................................................................31

5.6 Suitable antenna cables and antennas...................................................................................32

5.7 Replacing the PLUG (C-PLUG or KEY-PLUG) ......................................................................35

6 Technical data ...................................................................................................................................... 39

6.1 Technical specifications W774/W734 RJ-45 ..........................................................................39

6.2 Technical specifications W774 M12 .......................................................................................42

7 Dimension drawings.............................................................................................................................. 45

8 Approvals.............................................................................................................................................. 47

Index..................................................................................................................................................... 49

Contents

SCALANCE W774-1/W734-1

4Operating Instructions, 09/2015, C79000-G8976-C325-06

SCALANCE W774-1/W734-1

Operating Instructions, 09/2015, C79000-G8976-C325-06 5

Information on the Internet

Bitte beachten Sie die Warnhinweise und zusätzlichen Informationen in der

Kompaktbetriebsanleitung in Ihrer Sprache im Internet:

http://support.automation.siemens.com/ww/view/at/10806097

http://support.automation.siemens.com/ww/view/ch/10806097

http://support.automation.siemens.com/ww/view/de/10806097

http://support.automation.siemens.com/ww/view/li/10806097

http://support.automation.siemens.com/ww/view/lu/10806097

Please observe the warnings and additional information in the compact operating

instructions in your language in the Internet:

http://support.automation.siemens.com/ww/view/au/10806097

http://support.automation.siemens.com/ww/view/ca/10806097

http://support.automation.siemens.com/ww/view/gb/10806097

http://support.automation.siemens.com/ww/view/ie/10806097

http://support.automation.siemens.com/ww/view/us/10806097

http://support.automation.siemens.com/ww/view/za/10806097

Veuillez tenir compte des avertissements et informations supplémentaires de la notice de

service dans votre langue sur Internet:

http://support.automation.siemens.com/ww/view/be/10806097

http://support.automation.siemens.com/ww/view/ch/10806097

http://support.automation.siemens.com/ww/view/fr/10806097

http://support.automation.siemens.com/ww/view/lu/10806097

Si prega di tenere conto delle avvertenze e ulteriori informazioni nell’istruzione operativa

compatta nella relativa lingua in Internet:

http://support.automation.siemens.com/ww/view/it/10806097

Se ruega tener en cuenta las advertencias y las informaciones complementarias contenidas

en las instrucciones de servicio (resumen) en español en Internet:

http://support.automation.siemens.com/ww/view/cl/10806097

http://support.automation.siemens.com/ww/view/es/10806097

Dbejte prosím na výstražné pokyny a doplňkové informace v kompaktním návodu k obsluze

ve vašem jazyce na internetu:

http://support.automation.siemens.com/ww/view/cz/10806097

Vær venligst opmærksom på de advarselsanvisninger og ekstra informationer der findes på

dit sprog i kompaktdriftsvejledningen på internettet:

http://support.automation.siemens.com/ww/view/dk/10806097

Noudata lyhyen käyttöoppaan sisältämiä varoituksia ja huomio sen muutkin tiedot. Oman

kielisesi käyttöoppaan löydät internetistä osoitteesta:

http://support.automation.siemens.com/ww/view/fi/10806097

Λάβετε υπόψη τις υποδείξεις προειδοποίησης και τις πρόσθετες πληροφορίες των

συνοπτικών οδηγιών χρήσης που παρέχονται στη γλώσσα σας στο Διαδίκτυο:

http://support.automation.siemens.com/ww/view/gr/10806097

请注意互联网上精编版操作说明相应语言版本中的警告提示和附加信息：

http://support.automation.siemens.com/ww/view/cn/10806097

Information on the Internet

SCALANCE W774-1/W734-1

6Operating Instructions, 09/2015, C79000-G8976-C325-06

http://support.automation.siemens.com/ww/view/hk/10806097

http://support.automation.siemens.com/ww/view/sg/10806097

Kérjük, vegye figyelembe az interneten található, az Ön anyanyelvén íródott kompakt

használati útmutatóban található figyelmeztetéseket és további információkat:

http://support.automation.siemens.com/ww/view/hu/10806097

Skoðið vel viðvaranir og aðrar upplýsingar í notkunarleiðbeiningunum á ykkar tungumáli á

internetinu:

http://support.automation.siemens.com/ww/view/is/10806097

インターネットサイトにある各言語の注意事項および追加情報を参照してください:

http://support.automation.siemens.com/ww/view/jp/10806097

사이트에 있는 귀하의 언어로 된콤팩트 사용 설명서에 명시된 경고 지침 및추가 정보를

준수하십시오:

http://support.automation.siemens.com/ww/view/kr/10806097

http://support.automation.siemens.com/ww/view/kw/10806097

Neem goed nota van de waarschuwingen en extra informatie in de compacte

gebruiksaanwijzing in uw taal op internet:

http://support.automation.siemens.com/ww/view/be/10806097

http://support.automation.siemens.com/ww/view/nl/10806097

Vennligst følg advarslene og annen informasjon i den kompakte bruksanvisningen, som du

finner på ditt språk på internett:

http://support.automation.siemens.com/ww/view/no/10806097

Proszę zwrócić uwagę na ostrzeżenia oraz dodatkowe informacje w kompaktowej instrukcji

obsługi, dostępnej w odpowiednim języku w internecie:

http://support.automation.siemens.com/ww/view/po/10806097

Observera varningshänvisningarna och extrainformationerna i kompaktbruksanvisningen

som finns på ditt språk på internet:

http://support.automation.siemens.com/ww/view/se/10806097

İnternette kendi dilinizdeki kompakt işletim kılavuzunda yer alan uyarı notlarına ve ek

bilgilere lütfen dikkat edin:

http://support.automation.siemens.com/ww/view/tr/10806097

SCALANCE W774-1/W734-1

Operating Instructions, 09/2015, C79000-G8976-C325-06 7

Introduction

2.1

Information on the Operating Instructions

Validity of the Operating Instructions

These operating instructions cover the following products:

Article no. of the RoW version

Article no. of the US version

Access points

SCALANCE W774-1 RJ-45

6GK5774-1FX00-0AA0

6GK5774-1FX00-0AB0

SCALANCE W774-1 M12 EEC 6GK5774-1FY00-0TA0 6GK5774-1FY00-0TB0

Ethernet client module

SCALANCE W734-1 RJ-45

6GK5734-1FX00-0AA0

6GK5734-1FX00-0AB0

These operating instructions apply to the following software version:

●SCALANCE W774/W734 with firmware as of version 5.2

Purpose of the Operating Instructions

Based on the operating instructions, you will be able to install and connect up the

SCALANCE W774/W734 correctly. The configuration and the integration of the device in a

WLAN are not described in these instructions.

Documentation on the accompanying CD

You will find detailed information about configuration in the SCALANCE W700 configuration

manuals on the accompanying SIMATIC NET IWLAN CD under the file name:

PH_SCALANCE-W770-W730-WBM_76.pdf and PH_SCALANCE-W770-W730-CLI_76.pdf

Note

Make sure that you read the exp

lanations and instructions in the readme.htm file

Introduction

2.2 Structure of the type designation

SCALANCE W774-1/W734-1

8Operating Instructions, 09/2015, C79000-G8976-C325-06

License conditions

Note

Open source software

Read the

license conditions for open source software carefully before using the product.

You will find license conditions in the following documents on the supplied data medium:

●DOC_License_74.pdf

●DOC_LicenseScalanceW_76.htm

2.2

Structure of the type designation

The type designation of the device is made up of several parts that have the following

meaning:

2.3

Security information

Siemens provides automation and drive products with industrial security functions that

support the secure operation of plants or machines. They are an important component in a

holistic industrial security concept. With this in mind, our products undergo continuous

development. We therefore recommend that you keep yourself informed with respect to our

product updates. Please find further information and newsletters on this subject at:

http://support.automation.siemens.com.

To ensure the secure operation of a plant or machine it is also necessary to take suitable

preventive action (e.g. cell protection concept) and to integrate the automation and drive

components into a state-of-the-art holistic industrial security concept for the entire plant or

machine. Any third-party products that may be in use must also be taken into account.

Please find further information at: http://www.siemens.com/industrialsecurity

SCALANCE W774-1/W734-1

Operating Instructions, 09/2015, C79000-G8976-C325-06 9

Description

3.1

Components of the product

The following components are supplied with the product:

●SCALANCE W774 or SCALANCE W734

●2 protective caps for the antenna sockets

●1 connector for the supply voltage (only with device variant RJ-45)

●3 protective caps for the M12 sockets (only with device variant M12)

●1 screw for mounting on an S7-300 standard rail or S7-1500 standard rail

●SIMATIC NET Industrial Wireless LAN CD

Please check that the consignment you have received is complete. If the consignment is

incomplete, contact your supplier or your local Siemens office.

3.2

LED display

Information on operating status and data transfer

On the front of the housing, several LEDs provide information on the operating status of the

device:

Description

3.2 LED display

SCALANCE W774-1/W734-1

10 Operating Instructions, 09/2015, C79000-G8976-C325-06

LED

Color

Meaning

Green

Power supply L1.

L2 Green Power supply L2.

PoE

Green

Power supply using Power over Ethernet.

Green

There is a connection via the first Ethernet interface (Link).

Green and yel-

low flashing

alternately

Data transfer via the first Ethernet interface.

Green

There is a connection via the second Ethernet interface (Link).

Green and yel-

low flashing

alternately

Data transfer via the second Ethernet interface.

R1 Green

SCALANCE W774 in access point mode:

The WLAN interface is initialized and ready for operation.

SCALANCE W774 in client mode or SCALANCE W734:

There is a connection via the WLAN interface.

Green and yel-

low flashing

alternately

Data transfer over the WLAN interface.

Green

flashing briefly

SCALANCE W774 in access point mode:

With 802.11h, the channel is scanned for one minute for primary users

before the channel can be used for data traffic.

SCALANCE W774 in client mode or SCALANCE W734:

The client waits for the MAC address due to the setting "Automatic" for

the "MAC mode" parameter and is connected to no access point.

Green

flashing 3 x

short, 1 x long

SCALANCE W774 in client mode or SCALANCE W734:

The client waits for the MAC address due to the setting "Automatic" for

the "MAC mode" parameter and is connected to an access point.

Red

An error occurred during operation with the device.

Red

R1 flashing yel-

low at the same

time

A primary user was found on all enabled channels.

Flashing yellow "Flashing" enabled using SIMATIC NET Primary Setup Tool (PST).

Note

Primary user (radar) on all enabled channels

If the device detects a primary user (for examp

le radar signals) on all enabled channels of

the W

LAN interface, the LED

is lit and

flashes. No data traffic is then possible for the

next 30 minutes. After this time, the device runs the scan again and checks whether a

primary user sti

ll exists. If no primary user is detected, data traffic is possible again.

The wait time of 30 minutes

is necessary due to legal

requirements and cannot be shortened

even by restarting the device.

Andere Handbücher für SCALANCE W774-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Drahtloser Zugangspunkt Handbücher

Siemens

Siemens RuggedCom WIN7023 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W774-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W784-1 Administratorhandbuch

Siemens

Siemens HiPath Series Bedienungsanleitung

Siemens

Siemens SCALANCE W774-1 RJ-45 Bedienungsanleitung

Siemens

Siemens scalance WLC711 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5214 Bedienungsanleitung

Siemens

Siemens SCALANCE W760 Bedienungsanleitung

Siemens

Siemens SCALANCE W1750D UI Merkblatt

Siemens

Siemens SCALANCE W786-1PRO Bedienungsanleitung

Siemens

Siemens SCALANCE W1780 Merkblatt

Siemens

Siemens SIMATIC NET SCALANCE W786C Series Bedienungsanleitung

Siemens

Siemens SCALANCE W774-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W760 Bedienungsanleitung

Siemens

Siemens SCALANCE W700 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W734-1 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W780 Series Merkblatt

Siemens

Siemens SIMATIC NET SCALANCE W720 Bedienungsanleitung

Siemens

Siemens SCALANCE W786-xPRO Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5223 Bedienungsanleitung

Siemens

Siemens SCALANCE W778-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W786-x Bedienungsanleitung

Siemens

Siemens SCALANCE W786-2PRO Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5118 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung