Siemens SIMATIC NET SCALANCE W786C Series Bedienungsanleitung

SCALANCE W786C

___________________

SIMATIC NET

Industrial Wireless LAN

SCALANCE W786C

Operating Instructions

10/2015

A5E03692138

-07

Information on the Internet

Safety notes

Introduction

Description

Mounting

Connection

Technical data

Approvals

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03692138-07

Ⓟ

10/2015 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SCALANCE W786C

Operating Instructions, 10/2015, A5E03692138-07 3

Table of contents

1 Information on the Internet ...................................................................................................................... 5

2 Safety notes............................................................................................................................................ 7

2.1 General safety instructions for the SCALANCE W786C ..........................................................7

3 Introduction............................................................................................................................................. 9

3.1 Information on the Operating Instructions ................................................................................9

3.2 Structure of the type designations ..........................................................................................10

4 Description............................................................................................................................................ 11

4.1 Scope of delivery ....................................................................................................................11

4.2 LED display.............................................................................................................................12

4.3 Reset button............................................................................................................................13

5 Mounting............................................................................................................................................... 15

5.1 Safety notes relating to installation .........................................................................................15

5.2 Removing / fitting the housing cover.......................................................................................16

5.3 Laying the cables ....................................................................................................................18

5.4 Mounting without an adapter (wall mounting only) .................................................................20

5.5 Installation with mounting plate...............................................................................................22

5.5.1 Fitting the mounting plate to a wall .........................................................................................22

5.5.2 Screwing the cover plate for the cable feedthrough to the mounting plate ............................24

5.5.3 Fitting the mounting plate to an S7-300 standard rail.............................................................25

5.5.4 Fitting the mounting plate to a DIN rail ...................................................................................26

5.5.5 Fitting the mounting plate to a mast........................................................................................27

5.5.6 Fitting/removing the SCALANCE W786 to/from a mounting plate .........................................28

6 Connection ........................................................................................................................................... 31

6.1 Lightning protection, power supply and grounding .................................................................31

6.2 Suitable cables for power supply and Ethernet ......................................................................36

6.3 Connecting the cables ............................................................................................................37

6.4 Connecting the power supply .................................................................................................40

6.5 Connecting a power supply adapter .......................................................................................42

6.6 Connecting to Industrial Ethernet ...........................................................................................46

6.7 SFP/SFP+ transceiver ............................................................................................................47

6.8 Suitable antenna cables and antennas...................................................................................49

6.9 Connecting external antennas ................................................................................................52

7 Technical data ...................................................................................................................................... 55

Table of contents

SCALANCE W786C

4Operating Instructions, 10/2015, A5E03692138-07

7.1 Technical specifications (SCALANCE W786C-2).................................................................. 55

7.2 Dimension drawing SCALANCE W786 ................................................................................. 58

7.3 Radiation patterns diagrams of SCALANCE W786 internal antennas .................................. 59

8 Approvals ............................................................................................................................................. 63

Index .................................................................................................................................................... 65

SCALANCE W786C

Operating Instructions, 10/2015, A5E03692138-07 5

Information on the Internet

Bitte beachten Sie die Warnhinweise und zusätzlichen Informationen in der

Kompaktbetriebsanleitung in Ihrer Sprache im Internet:

http://support.automation.siemens.com/ww/view/at/10806097

http://support.automation.siemens.com/ww/view/ch/10806097

http://support.automation.siemens.com/ww/view/de/10806097

http://support.automation.siemens.com/ww/view/li/10806097

http://support.automation.siemens.com/ww/view/lu/10806097

Please observe the warnings and additional information in the compact operating

instructions in your language in the Internet:

http://support.automation.siemens.com/ww/view/au/10806097

http://support.automation.siemens.com/ww/view/ca/10806097

http://support.automation.siemens.com/ww/view/gb/10806097

http://support.automation.siemens.com/ww/view/ie/10806097

http://support.automation.siemens.com/ww/view/us/10806097

http://support.automation.siemens.com/ww/view/za/10806097

Veuillez tenir compte des avertissements et informations supplémentaires de la notice de

service dans votre langue sur Internet:

http://support.automation.siemens.com/ww/view/be/10806097

http://support.automation.siemens.com/ww/view/ch/10806097

http://support.automation.siemens.com/ww/view/fr/10806097

http://support.automation.siemens.com/ww/view/lu/10806097

Si prega di tenere conto delle avvertenze e ulteriori informazioni nell’istruzione operativa

compatta nella relativa lingua in Internet:

http://support.automation.siemens.com/ww/view/it/10806097

Se ruega tener en cuenta las advertencias y las informaciones complementarias contenidas

en las instrucciones de servicio (resumen) en español en Internet:

http://support.automation.siemens.com/ww/view/cl/10806097

http://support.automation.siemens.com/ww/view/es/10806097

Dbejte prosím na výstražné pokyny a doplňkové informace v kompaktním návodu k obsluze

ve vašem jazyce na internetu:

http://support.automation.siemens.com/ww/view/cz/10806097

Vær venligst opmærksom på de advarselsanvisninger og ekstra informationer der findes på

dit sprog i kompaktdriftsvejledningen på internettet:

http://support.automation.siemens.com/ww/view/dk/10806097

Noudata lyhyen käyttöoppaan sisältämiä varoituksia ja huomio sen muutkin tiedot. Oman

kielisesi käyttöoppaan löydät internetistä osoitteesta:

http://support.automation.siemens.com/ww/view/fi/10806097

Λάβετε υπόψη τις υποδείξεις προειδοποίησης και τις πρόσθετες πληροφορίες των

συνοπτικών οδηγιών χρήσης που παρέχονται στη γλώσσα σας στο Διαδίκτυο:

http://support.automation.siemens.com/ww/view/gr/10806097

请注意互联网上精编版操作说明相应语言版本中的警告提示和附加信息：

http://support.automation.siemens.com/ww/view/cn/10806097

Information on the Internet

SCALANCE W786C

6Operating Instructions, 10/2015, A5E03692138-07

http://support.automation.siemens.com/ww/view/hk/10806097

http://support.automation.siemens.com/ww/view/sg/10806097

Kérjük, vegye figyelembe az interneten található, az Ön anyanyelvén íródott kompakt

használati útmutatóban található figyelmeztetéseket és további információkat:

http://support.automation.siemens.com/ww/view/hu/10806097

Skoðið vel viðvaranir og aðrar upplýsingar í notkunarleiðbeiningunum á ykkar tungumáli á

internetinu:

http://support.automation.siemens.com/ww/view/is/10806097

インターネットサイトにある各言語の注意事項および追加情報を参照してください:

http://support.automation.siemens.com/ww/view/jp/10806097

사이트에 있는 귀하의 언어로 된콤팩트 사용 설명서에 명시된 경고 지침 및추가 정보를

준수하십시오:

http://support.automation.siemens.com/ww/view/kr/10806097

http://support.automation.siemens.com/ww/view/kw/10806097

Neem goed nota van de waarschuwingen en extra informatie in de compacte

gebruiksaanwijzing in uw taal op internet:

http://support.automation.siemens.com/ww/view/be/10806097

http://support.automation.siemens.com/ww/view/nl/10806097

Vennligst følg advarslene og annen informasjon i den kompakte bruksanvisningen, som du

finner på ditt språk på internett:

http://support.automation.siemens.com/ww/view/no/10806097

Proszęzwrócićuwagęna ostrzeżenia oraz dodatkowe informacje w kompaktowej instrukcji

obsługi, dostępnej w odpowiednim języku w internecie:

http://support.automation.siemens.com/ww/view/po/10806097

Observera varningshänvisningarna och extrainformationerna i kompaktbruksanvisningen

som finns på ditt språk på internet:

http://support.automation.siemens.com/ww/view/se/10806097

İnternette kendi dilinizdeki kompakt işletim kılavuzunda yer alan uyarınotlarına ve ek

bilgilere lütfen dikkat edin:

http://support.automation.siemens.com/ww/view/tr/10806097

SCALANCE W786C

Operating Instructions, 10/2015, A5E03692138-07 7

Safety notes

2.1

General safety instructions for the SCALANCE W786C

WARNING

Danger from line voltage

Once you have removed the housing cover, there is the danger from line voltage in the

area of the connecting terminals on the power supply adapter.

Opening the device and all work performed on the open device (for example connecting

and disconnecting cables, pressing the reset button) must therefore only be performed by

electrical specialists!

Safety notes

2.1 General safety instructions for the SCALANCE W786C

SCALANCE W786C

8Operating Instructions, 10/2015, A5E03692138-07

SCALANCE W786C

Operating Instructions, 10/2015, A5E03692138-07 9

Introduction

3.1

Information on the Operating Instructions

Validity of the Operating Instructions

These operating instructions cover the following products:

Article number

SCALANCE W786C-2 RJ-45

6GK5 786-2FC00-1AA0

SCALANCE W786C-2IA RJ-45

6GK5 786-2HC00-1AA0

SCALANCE W786C-2 SFP 6GK5 786-2FE00-1AA0

If information relates to all the named products, the term SCALANCE W786 will be used.

These operating instructions apply to the following software version:

●SCALANCE W786C with firmware as of version 8.31

Operating instructions

Based on the operating instructions, you will be able to install and connect up the

SCALANCE W786 correctly. Configuring the SCALANCE W786 and integration in a WLAN

are not dealt with in this manual.

Documentation on the accompanying CD

You will find introductory information about configuration in the document "Getting Started

SCALANCE WLC711" on the accompanying SIMATIC NET IWLAN CD under the file name:

GS_SCALANCE-WLC711_76.pdf

Note

Make sure that you read the explanations and instructions in the README.txt file

Introduction

3.2 Structure of the type designations

SCALANCE W786C

10 Operating Instructions, 10/2015, A5E03692138-07

3.2

Structure of the type designations

The type designation of a SCALANCE W786 is made up of several parts that have the

following meaning:

Andere Handbücher für SIMATIC NET SCALANCE W786C Series

Inhaltsverzeichnis

Andere Siemens Drahtloser Zugangspunkt Handbücher

Siemens

Siemens SCALANCE W700 802.11ax Bedienungsanleitung

Siemens

Siemens SCALANCE W784-1 Administratorhandbuch

Siemens

Siemens SCALANCE W786-xPRO Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5258 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W786C Series Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W780 Series Merkblatt

Siemens

Siemens SCALANCE W1780 Merkblatt

Siemens

Siemens SIMATIC NET SCALANCE W734-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W760 Bedienungsanleitung

Siemens

Siemens SCALANCE W774-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W1788 Series Bedienungsanleitung

Siemens

Siemens scalance WLC711 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5118 Bedienungsanleitung

Siemens

Siemens SCALANCE X204RNA EEC Bedienungsanleitung

Siemens

Siemens SCALANCE W774-1 RJ-45 Bedienungsanleitung

Siemens

Siemens SCALANCE W1750D UI Merkblatt

Siemens

Siemens RuggedCom WIN7023 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5137 Bedienungsanleitung

Siemens

Siemens SCALANCE W760 Merkblatt

Siemens

Siemens SCALANCE W788 Bedienungsanleitung

Siemens

Siemens SCALANCE W788-1 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W774-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W788-1PRO Bedienungsanleitung

Siemens

Siemens SCALANCE W786-2PRO Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung