Sigmann DELTA SD160ex Bedienungsanleitung

Sigmann DELTA GmbH Tel. 06268-92899-73 Handelsregister Volksbank Kraichgau

Hauptstraße 53 Fax 06268-92899-74 Mannheim HRB 703603 BLZ 672 922 00 Konto 55258007

D-74928 Hüffenhardt info@sigmann-delta.de Geschäftsführer S.W.I.F.T.-Code GENO DE 61SSH

UstIDNr: DE257944309 http://www.sigmann-delta.de Joachim Kraus IBAN DE31 6729 2200 0055 2580 07

Date: 03.12.2015

Operating Instructions

Wired handheld scanner

SD160ex Type SD.112.0000.0X

SD260ex Type SD.115.0000.00

SD160ex_BA_en_004

Table of contents

1 Product range wired handheld scanner Zone 1 2

2 Scanner overview 3

3 Important Notes on Operating Instructions 4

3.1. Safety Information ................................................................................................ 4

3.2 Notes on Operating Instructions ................................................................................................ 5

3.3 General Notes of Caution ................................................................................................ 6

4 Product Information - SD160ex 8

4.1 Explosion Protection ................................................................................................................... 8

4.2 Technical Data ................................................................................................................... 8

4.3 Type Numbers ................................................................................................................. 10

4.4 Serial numbers ................................................................................................................. 10

4.5 Application ................................................................................................................. 10

5 System Assembly - 1D Sanner 11

5.1 Discritpion ............................................................................................. 11

6 Product Information - SD260ex 12

6.1 Explosion Protection ................................................................................................................... 12

6.2 Technical Data ................................................................................................................... 12

6.3 Type Numbers ................................................................................................................... 14

6.4 Serial numbers ................................................................................................................... 14

6.5 Application ................................................................................................................... 14

7 System Assembly - 2D Scanner 15

7.1 Discritpion ............................................................................................. 15

8 Cable range in System Assembly for 1D and 2D Scanner 16

SD160ex_BA_en_004

9 Step-by-step Guide on Installation and Operation 17

9.1 Connection Handheld Scanner SD160ex / SD260ex .............................................. 17

9.2 Connection power supply SDVM125ex RS232 .............................................. 18

9.3 Direct Connection SD160ex / SD260ex to SDVM125ex RS232 .............................................. 19

9.4 Connection power supply SDVM125ex USB .............................................. 20

9.5 Direct Connection SD160ex to SDVM125ex USB .............................................. 21

10 Attachment 22

10.1 Certificate Wired Handheld Scanner SD160ex / SD260ex ...................................................... 22

10.2 Certificate of Conformity Scanner SD160ex / SD260ex ...................................................... 26

10.3 Certificate power supply SDVM125ex ...................................................... 29

10.4 Certificate of Conformity power supply SDVM125ex ...................................................... 35

11 Contact 42

SD160ex_BA_en_004 2

1 Product range wired handheld scanner Zone 1

SD160ex_BA_en_004 3

2 Scanner overview

Wired

Bluetooth

PDF

SD160ex









SD160exPDF









SD260ex







SD160BTex







SD160BTex PDF







SD161BTex







SD161BTex PDF







SD261BTex





SD160ex_BA_en_004 4

3Important Notes on Operation Instructions

3.1 Safety information

Warnings are highlighted by a special symbol and a different font colour:

Danger

Non-compliance may result in life-threatening situations.

This warning must be heeded.

Warning

This type of warning concerns dangerous situations that may result in minor injuries.

Info

Important and helpful notes and information.

SD160ex_BA_en_004 5

3.2 Notes on the Operating Instructions

Before starting up the equipment please read the manual thoroughly.

The Operating Instructions contain important information on functionality as well as safety rules. If these

are not heeded, normal operations within hazardous areas cannot be guaranteed.

The notes contained in this manual are important for starting up and operating the product.

These instructions may be updated at any time. Sigmann DELTA GmbH reserves the right to make changes to

this document.

Before using the product, users must ensure that they have the most up-to-date version of the operating instruc-

tions. To be sure this is the case, please check Sigmann DELTA's website at www.Sigmann-DELTA.de or contact

one of the company's staff.

The drawings contained in these operating instructions are for illustration purposes only and may differ somewhat

from the actual design.

No changes may be made to the device that were not intended or approved

by Sigmann DELTA.

If the handheld scanner is not used properly, the operating permission for hazardous areas may lapes for the

device in question.

Non-adherence to the instructions will void any warranty.

For further information on the commission of the SD160ex handheld scanner you may also wish to

refer to the manual issued by SICK AG (www.SICK.com).

SD160ex_BA_en_004 6

3.3 General Notes of Caution

Caution / Notes

The devices may only be operated when fully assembled.

In hazardous areas the devices must not be wiped or cleaned with a dry cloth!

The device must be switched off immediately if it is likely that as a consequence

of damaging impact or general peculiarities the device can no longer be safely

operated. (e.g. ingress of water or other fluids, temperatures outside of the

specified range,...)

General statutory requirements or health and safety rules and accident preven-

tion guidelines and environmental laws must be adhered to (e.g. the German

Occupational Health and Safety regulation).

Users must not open the device.

Users must not make any changes to the device. Components may not be ex-

changed or replaced. If non-specified components are used, explosion protec-

tion is no longer guaranteed.

Ensure safe handling with firm footing and sufficient room for movement.

If the enclosure is in any way damaged the device must be removed from the

hazardous area immediately.

In accordance with IEC 60079-19 and IEC 60079-17, operators of electrical

installation in hazardous areas are obliged to have them serviced by qualified

electricians.

Do not insert any sharp objects into the enclosure or any other openings of the

handheld barcode scanner. Any openings at the device must not be covered or

blocked.

The device and any accessories must be properly disposed of, i.e. as legally

specified, for example by a certified company.

Notes on installation

Electrical plants are subject to certain regulations concerning installation and

operation (e.g. RL 99/92/EG, RL 94/9EG, or the national rules such as IEC 60

079-14 and VDE 0100).

In the hazardous area it is the operator's responsibility to carry out any repair

and maintenance in compliance with applicable rules.

SD160ex_BA_en_004 7

Caution

on laser devices

Devices fitted with laser fall under standards US 21 CFR 1040.10 and EN

60825-1. The laser's classification is stated on a plate affixed to the device.

Class 1 lasers are deemed inherently safe during normal use, but users must

not look directly into the light source. The following declaration is required by

American and international laws:

Usage of control elements, adaptations or the use of procedures that differ from

these instructions may result in a dangerous exposure to laser beams.

Class 2 lasers use a visible low-voltage LED. As with any source of bright light,

such as the sun, the user should avoid looking directly into the light. Brief expo-

sure to a class 2 laser is deemed not dangerous.

Maintenance

Provided the device is operated and assembled according to instructions and

the ambient requirements are being met continuous maintenance is not neces-

sary.

Servicing

Operators of electric equipment in hazardous areas are obliged to have them

serviced by qualified electricians (IEC 60079-19 and IEC 60079-17).

Repairs

Repairs may only be carried out by the manufacturer or by persons trained and

commissioned for this purpose by the manufacturer.

The device is closed ex-factory. It may only be opened in the factory by specifically trained personnel.

Software installation

For instructions on how to install the software at the PC please refer to the

manual issued by SICK Vertriebs-GmbH in Düsseldorf.

Operation

Before operating the device you must ensure that all necessary components are

available.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sigmann DELTA Scanner Handbücher

Sigmann DELTA

Sigmann DELTA SD160BTex Bedienungsanleitung

Sigmann DELTA

Sigmann DELTA SD161BTex Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung