SIIG USB 3.0 to DisplayPort Adapter Bedienungsanleitung
1
USB 3.0 to DisplayPort
Adapter
Quick Installation Guide
04-0828B
Introduction
The USB 3.0 to DisplayPort Adapter adds a
DisplayPort port to your USB 3.0 enabled system.
Key Features and Benefits
• Compliant with Universal Serial Bus 3.0
Specification
•Supports high resolution up to 1080p (Full
HD) & 2560 x 1600 (WQXGA)
• Connect up to 6 adapters per system
• Display modes: Primary, Extended & Mirror
• Supports 5.1-Channel audio
Serial Number Sticker
For future product return or exchange, this serial
number is required. Please keep it for your
reference.
2
System Requirements
• Desktop or notebook PC with an available
USB 2.0/3.0 port (USB 3.0 recommended)
• Windows®8 (32-/64-bit) / 7 (32-/64-bit) /
Vista (32-/64-bit) / XP SP3 (32-bit)
Package Contents
•USB 3.0 to DisplayPort Adapter
• USB Cable (Type A to Micro-B)
• Driver CD
• Quick installation guide
Layout
Figure 1: Layout
USB 3.0 Micro-B
connector
DisplayPort
connector
3
Software Installation
Make sure the proper version driver for your
graphics card is installed, the USB 3.0 to
DisplayPort Adapter is not designed to work with
Windows' Standard VGA Graphics Adapter
driver.
Important: Do not plug the adapter into the
computer until instructed to do so.
Windows 8 (32-/64-bit) / 7 (32-/64-bit)
1. Insert the driver CD. Close the CD AutoPlay
box.
2. Click Start, in the Search programs and
files box, type D:\setup.exe, press Enter.
Or press Windows key and R, type
D:\setup.exe in the Run window, and click
OK. (Change D: to match your CD/DVD-
ROM drive letter)
3. At the User Account Control, click Yes.
4. Select I Accept.
5. Connect your second monitor to the adapter
and turn it on.
4
6. Plug the adapter into the computer and the
driver will be installed automatically.
7. Restart your system to complete the
installation.
Windows Vista (32-/64-bit)
1. Insert the driver CD. Close CD autoplay
box if prompted.
2. Click Start, in the Start Search box, type
D:\setup.exe, press Enter.(Change D: to
match your CD/DVD-ROM drive letter)
3. Click Allow, and select I Accept.
4 Connect your second monitor to the adapter
and turn it on.
5. Plug the adapter into the computer and the
driver will be installed automatically.
6. Restart your system to complete the
installation.
5
Windows XP (32-bit)
1. Insert the driver CD. Click Start, Run, type
D:\setup.exe, then click OK. (Change D:
to match your CD/DVD-ROM drive letter)
2. Select I Accept.
3. Connect your second monitor to the adapter
and turn it on.
4. Plug the adapter into the computer and the
driver will be installed automatically.
5. Restart your system to complete the
installation.
To Verify Windows Installation
1. Go to Device Manager to verify installation.
For Windows 8 / 7 / XP: Right click Computer
or My Computer, click Manage, then click
Device Manager.
For Windows Vista: Right click Computer,
click Manage, click Continue, then click
Device Manager.
2. Double click USB Display Adapters.
DisplayLink Display Adapter (4301) and
UHD-100DP should be displayed.
6
Display Configuration
After successful driver installation, a display
utility icon will appear in the taskbar by the
system clock.
Note: The icon may be hidden in the Windows
System Tray. Click the arrow icon to bring it
up.
Selectable Viewing Modes
Access the utility by clicking the utility icon ,
and click UHD-100 DP.
Figure 2: Utility Settings
7
•Screen Resolution: Click to select an
available resolution. Note: This function is
disabled in mirror mode, as the resolution is
defined by the resolution of the primary
monitor.
•Screen Rotation: Rotates the screen
according to the desired orientation.
•Extend To: Extends the screen according to
the desired orientation.
•Extend: This is the default setting of the
USB 3.0 to DisplayPort Adapter. This mode
extends your desktop for easy viewing of
multiple windows. The window will move
off the primary display from the right side
and enter the extended display from the left
side.
•Set as Main Monitor: Set this extended
screen as the main screen.
IMPORTANT: In Windows XP, set the
USB 3.0 to DisplayPort Adapter to Off
before selecting Set as Main Monitor.
8
•Mirror: Duplicates the primary monitor to
the monitor which connects with the USB
3.0 to DisplayPort Adapter.
• Off: Turns off the USB 3.0 to DisplayPort
Adapter.
• Optimize for Video (not available in
Windows XP): Optimize the video quality
when playing back. Text may appear less
clear when enabling.
• Fit to TV: Adjust the size of the desktop on
the TV. Note: This function works only
when one display is connected.
Multi-Monitor Configuration
Theadd-onmonitorscanbeconfiguredbyclicking
the utility icon and selecting DisplayLink
Manager or Video Setup. The configuration
page can also be opened using the steps below.
Position the mouse anywhere on the desktop:
1. For Windows 8 / 7: Right click then select
Screen resolution.
2. For Windows Vista: Right click then select
Personalize, then click Display Settings.
9
3. For Windows XP: Right click, select
Properties, then select Settings tab.
Extended Mode
1. Refer to the Multi-Monitor Configuration
on page 8 to open the configuration page.
2. In the Display drop-down menu, select the
preferred monitor.
For Windows 8 / 7: In the Multiple displays
drop-down menu, select Extend desktop
to this display.
For Windows Vista: Check the Extend the
desktop onto this monitor box.
For Windows XP: Check the Extend my
Windows desktop onto this monitor box.
3. Click OK to confirm and close the settings
screen.
4. Once the setting is completed, simply drag
and drop the application icons or the opened
window, in restore down mode, to the add
on monitor. However, some applications
may not support the extended desktop.
10
Mirror Mode
1. Refer to the Multi-Monitor Configuration
on page 8 to open the configuration page.
2. In the Display drop-down menu, select the
preferred monitor.
For Windows 8 / 7: Check Multiple displays,
select Duplicate these displays.
For Windows Vista: Uncheck the Extend the
desktop onto this monitor box.
For Windows XP: Uncheck the Extend my
Windows desktop onto this monitor box.
3. Click OK to confirm and close the settings
screen.
Figure 3: Monitor Orientation
Inhaltsverzeichnis
Andere SIIG Adapter Handbücher
SIIG
SIIG M1 Bedienungsanleitung
SIIG
SIIG PCIe to ExpressCard Adapter Bedienungsanleitung
SIIG
SIIG NN26 Series Bedienungsanleitung
SIIG
SIIG US2322 Bedienungsanleitung
SIIG
SIIG Universal DC Power Adapter - 90W Bedienungsanleitung
SIIG
SIIG Wireless-N CardBus Adapter Bedienungsanleitung
SIIG
SIIG RS-422 Bedienungsanleitung
SIIG
SIIG SATA-to-IDE Adapter Bedienungsanleitung
SIIG
SIIG CyberParallel Dual PCIe Bedienungsanleitung
SIIG
SIIG Cool Dual SATA to USB 2.0 Docking Bedienungsanleitung
SIIG
SIIG JU-NE0711-S1 Produktinformationsblatt
SIIG
SIIG CyberParallel PCIe Bedienungsanleitung
SIIG
SIIG CE-AD0012-S1 Bedienungsanleitung
SIIG
SIIG CE-H23R11-S1 Bedienungsanleitung
SIIG
SIIG JU-H30612-S1 Produktinformationsblatt
SIIG
SIIG YN6181 Bedienungsanleitung
SIIG
SIIG CE-HM0021-S1 Bedienungsanleitung
SIIG
SIIG JU-000061-S1 Bedienungsanleitung
SIIG
SIIG SC-SA0512-S1 Bedienungsanleitung
SIIG
SIIG USB to RS-422/485 Serial Adapter Bedienungsanleitung
