SIIG US2322 Bedienungsanleitung
1
USB 2.0 DataLink Adapter
Quick Installation Guide
04-0336A
System Requirements
•USB equipped computer with one available
USBport(USB2.0recommended)
•Windows 98SE/ME/2000/XP/Server 2003
Package Contents
•(1)USB2.0DataLinkAdapter
•(1)DriverCD
•This Quick Installation Guide
Serial # Sticker
Forfutureproductreturnorexchange,thisserial#is
required. Pleasekeepitforyourreference.
2
SoftwareInstallation
Windows 98SE
1. InsertthedriverCD,ClickStart,thenRun.Type
D:\setup.exe, then OK. (Change D: to match
yourCD-ROMdriveletter)
2. ClickNext,Install,thenFinish.
3. Insert the USB 2.0 DataLink Adapter and the
drivers will automatically install.
Windows ME/XP/2000/2003
No driver installation is needed, simply connect the
USB 2.0 DataLink Adapter into a USB port and the
driver will install automatically.
To Verify Successfull Installation
1. Check Device Manager to verify successfull
installation.
Windows98SE/ME:FromthemainDesktop,right
clickMyComputer,thenclickProperties. Click
DeviceManagertab.
Windows 2000/XP/2003: Right click My
Computer, then click Manage. Click Device
Manager.
3
2. Click Disk drives, and OTI Thunderbird...
shouldbedisplayed.
Using Superlink Software Utility
Youcantransferfilesbetweenthetwosystemsthrough
theSuperLinkapplication software.
Starting SuperLink
This program must be executed on both computers
connectedto theUSB 2.0DataLinkAdapter.
1. DoubleclickMyComputer
2. Double click Removable Drive F: (Default
drive).
3. DoubleclickSuperLink icon.
Figure 1: SuperLink Utility
4
Data Transfer
To transfer files between systems, simply drag and
drop files between the two systems using the Local
Host and Remote Host windows of the SuperLink
utility.
Disabling Read Only
Insomecases,youmayneedtodisableReadOnlyon
bothsystemsbeforetransferringdata.
1. AttheSuperLinkwindow,clickSystem,then
clickSetup.
2. Uncheck Share as Read Only, then click OK.
5
Technical Support
QUESTIONS? SIIG’s Online Support has the answers!
Simply visit our Web site at www.siig.com and click
Support. Our online support database is updated daily
with new drivers and solutions. The answers to your
problems could be just a few clicks away.
If you can't find answers or solutions to your questions,
you have an option to submit the problems online to one
of our technical support analysts and we will promptly
respond to you with answers or solutions.
The 5-year manufacturer warranty supplied with this
product is offered by SIIG, Inc. If you should happen to
encounter any problems with this product, please follow
the procedures below.
1. If it is within the store's return policy period,
return the product to the store where you
purchased from.
2. Ifyourpurchasehaspassedthestore'sreturnpolicy
period, contact SIIG. See SIIG's Limited 5-year
Warranty for more information.
Online Product Registration
Please visit www.siig.com, click Support, then
Register toregister yourproduct online.
6
Blank Page
LIMITED5YEARWARRANTY
The Company warrants to the original buyer of this product that the
hardware is free of defects in materials and workmanship for a period
of five years from the date of purchase from a reseller or dealer.
If the product has been modified without written approval by the
Company, or the failure is a result of misuse, abuse or misapplication
as determined by the Company, the warranty is void and the Company
has no obligation to repair or replace the product.
Follow these steps to have the defective product repaired or replaced.
Step 1: Go to www.siig.com, click Support, then RMA to submit
the problem. A Technical Support Analyst will troubleshoot the
problem. If the product is determined to be defective, our RMA
department will issue you an RMA number. If you don't have
Internet access, contact our RMA department at (510)413-5333.
Step 2: Ship the product.
- Properly pack the product for shipping. All software, cable(s) and
other accessories that came with the original package must be
included.
- Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package,
and will not be responsible for a product returned
without an RMA number posted on the outside of the
shipping carton.
- You are responsible for the cost of shipping the product to SIIG at
the following address:
SIIG, Inc. RMA # _______________
6078 Stewart Avenue
Fremont, CA 94538
Step 3: SIIG will ship the repaired or replaced product via Ground in
the U.S and International Economy outside of the U.S at no cost to
the customer.
USB 2.0 DataLink Adapter is a trademark of SIIG, Inc. All other names
used in this publication are for identification only and may be
trademarksoftheirrespectivecompanies.
August, 2004 Copyright ©2004 by SIIG, Inc.
PRODUCT NAME MODEL NUMBER
USB 2.0 DataLink Adapter US2322
FCC RULES: TESTED TO COMPLY WITH FCC PART 15,
CLASS B OPERATING ENVIRONMENT: FOR HOME OR
OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
THE PARTY RESPONSIBLE FOR
PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
Online Store
SIIG offers all of our products online at our company store.
Visit us at http://onlinestore.siig.com to find our complete
lineofproducts,includinghardtofinditemsandaccessories
(power adapters, cables, upgrade kits, etc.).
Inhaltsverzeichnis
Andere SIIG Adapter Handbücher
SIIG
SIIG JU-000061-S1 Bedienungsanleitung
SIIG
SIIG USB 2.0 to VGA Pro Bedienungsanleitung
SIIG
SIIG Wireless-N Mini USB Wi-Fi Adapter Bedienungsanleitung
SIIG
SIIG SATA-to-IDE Adapter Bedienungsanleitung
SIIG
SIIG JU-NE0711-S1 Produktinformationsblatt
SIIG
SIIG CE-AD0012-S1 Bedienungsanleitung
SIIG
SIIG JU-H30612-S1 Produktinformationsblatt
SIIG
SIIG CN2502 Bedienungsanleitung
SIIG
SIIG US2253 Bedienungsanleitung
SIIG
SIIG JU-NE0211-S1 Bedienungsanleitung
SIIG
SIIG SATA-to-IDE Adapter Bedienungsanleitung
SIIG
SIIG YN6181 Bedienungsanleitung
SIIG
SIIG JU-000071-S1 Bedienungsanleitung
SIIG
SIIG JU-ACB112-S1 Bedienungsanleitung
SIIG
SIIG ID-SB0111-S1 Produktinformationsblatt
SIIG
SIIG Wireless-N CardBus Adapter Bedienungsanleitung
SIIG
SIIG USB 3.0 to DisplayPort Adapter Bedienungsanleitung
SIIG
SIIG PCI Express Serial Bedienungsanleitung
SIIG
SIIG 2-Port USB to RS-232 Serial Adapter Bedienungsanleitung
SIIG
SIIG JU-NE0B11-S1 Bedienungsanleitung
