SIIG JJ-PCM012-S2 Bedienungsanleitung

Single-Serial PC Card

Quick Installation Guide

04-0575B

Introducing the Single-Serial PC Card

The Single-Serial PC Card adds one high-speed serial port

(RS232) into your notebook computer to connect various

types of serial devices.

Keys Features and Benefits

• Works with notebook PC with a PCMCIA or Type

II/III PC Card slot

• 16650 UART supports baud rate up to 115.2Kbps

• Built-in 16-byte FIFO buffer to speed up data

transfers

• Works with various RS232 serial devices including

modems, PDAs, label printers, bar code scanners,

and more

• RoHS compliant

System Requirements

•Pentium or equivalent notebook computer with an

available PC Card slot

•Windows® 7 (32-bit) / Vista (32-bit) / Server 2003 &

2008 (32-bit) / XP (32-bit) / 2000 / ME / 98SE / 98

PackageContents

•Single-Serial PC Card

•Driver CD

•Quick installation guide

Layout

Serial Port

(9-pin)

PC Card

Connector

Figure 1: Single-Serial PC Card Layout

Hardware Installation

General instructions for installing the card are provided

below. Since the design of notebook computers may

vary, refer to your system’s reference manual for further

information, if needed.

1. Power off your notebook computer and any other

connected peripheral devices.

2. Insert the PC Card into the PC Card slot of your

notebook computer with its PC Card Connector

facing the slot. Make sure it is inserted all the way

in for a solid connection.

3. Power on your notebook computer.

Driver Installation

Windows 7 (32-bit)

1. Right click Computer, click Manage, then click

Device Manager.

2. Right click AVLAB PCMCIA_RS232_550, click

Update Driver Software.

3. Insert the driver CD, click Browse my computer for

driversoftware. ClosetheAutoPlay boxifprompted.

4. Type D:\, click Next. (Change D: to match your

CD/DVD-ROM drive letter)

5. Click Install this driver sofware anyway.

6. At Widows has successfully updated your driver

software, click Close to complete the installation.

Windows Vista (32-bit)

1. At the Found New Hardware window, click Locate

and install driver software (recommended), then

click Continue.

2. Click I don't have the disc. Show me other options.

3. Insert the driver CD, click Browse my computer for

driver software (advanced).

4. TypeD:\,thenclickNext. (ChangeD: tomatchyour

CD/DVD-ROM drive letter)

5. Click Install this driver software anyway.

6. Click Close to complete the installation.

Windows XP (32-bit) / Server 2003 (32-bit)

1. At the Found New Hardware Wizard,

XP (w/SP1 or earlier) / Server 2003: Go to step #2.

XP(w/SP2orlater)/ Server 2003 (w/SP1orlater):Select

No, not this time, click Next.

2. Insert the driver CD.

3. Select Install the software automatically,then click

Next.

4. If the Hardware Installation window pops up, click

Continue Anyway.

5. Click Finish to complete the installation.

Windows Server 2008 (32-bit)

1. At the Found New Hardware Wizard, click Locate

and install driver Software (recommended).

2. Click Don't search online.

3. Insert the driver CD when prompted.

4. Click Install this driver software anyway.

5. Click Close to complete the installation.

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Insert the driver CD.

4. Check CD-ROM drives, uncheck the other boxes,

and click Next.

5. Click Next and Finish to complete the installation.

Windows ME

1. At the Add New Hardware Wizard, choose

Automatic search....

2. Insert the driver CD.

3. Click Next, then click Finish.

4. Restart Windows to complete the installation.

Windows 98SE / 98

1. At the Add New Hardware Wizard, click Next.

2. Select Search for the best driver for your device

(Recommended), then click Next.

3. InsertthedriverCD,checkCD-ROMdrives,uncheck

the other boxes, and click Next.

4. Click Next, then click Finish.

5. Restart Windows to complete the installation.

To Verify Windows Installation

1. UseDeviceManagertoverify successfulinstallation.

For Windows 7: Right click Computer, click Manage,

click Device Manager.

For Windows Vista: Right click Computer, click

Manage, click Continue, click Device Manager.

For Windows XP / Server 2003 / 2000: Right click My

Computer, click Manage, click Device Manager.

For Windows Server 2008: Right click Computer, click

Manage, double click Diagnostics, click Device

Manager.

For Windows ME / 98SE / 98: From the main desktop,

right click My Computer, then click Properties.

Click Device Manager tab.

2. Click on the +(plus sign) in front of Ports (COM &

LPT), PCMCIA-RS232_550 (COM...) should be

displayed.

Changing COM Port Number

Some serial devices need a specific COM port in order to

work. If your serial device works properly, do not

change this setting. This option is only for Windows 7,

Vista, XP, Server 2003 & 2008, and 2000.

1. From the Device Manager window, double click

Ports (COM & LPT), then double click PCMCIA

RS232-550 ... .

2. Click Port Settings tab, then click Advanced.

3. Clickthedownarrownext to theCOMPort Number

box and select a COM port that is not in use. Click

OK.

4. Click OK again, then close Device Manager to save

the changes.

Removing the PC Card

BeforeejectingtheSingle-Serial PCCard fromthecomputer,

first use the Safely Remove Hardware utility to stop it.

Not following the steps below could lead to system

crashes, data corruption or data loss.

1. For Windows 7: Click the Safety Remove Hardware

and Eject Media icon located in the taskbar.

2. For Windows Vista / XP / Server 2003 & 2008 / 2000:

Click the Safely Remove Hardware icon located in

the taskbar by the system clock.

3. For Windows ME / 98SE / 98: Click the Unplug or

Eject Hardware icon located in the taskbar by the

system clock.

4. Click Stop PCMCIA-RS232_550 (COM...) or Safely

remove PCMCIA-RS232_550 (COM...).

5. At the Safe To Remove Hardware box, the Single-

Serial PC Card can be ejected from the computer.

Technical Support and Warranty

QUESTIONS? SIIG’sOnline Support has answers! Simplyvisit our

web site at www.siig.com and click Support. Our online support

database is updated daily with new drivers and solutions. Answers

toyour questionscould bejust afewclicks away. Youcan alsosubmit

questions online and a technical support analysts will promptly

respond.

SIIGoffersalifetime manufacturer warrantywiththis product. Please

see our web site for more warranty details. If you encounter any

problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the

product to the store where you purchased from.

B) Ifyour purchasehas passedthe store's returnpolicy period,please

follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a

request to SIIG RMA. Your RMA request will be processed, if the

product is determined to be defective, an RMA number will be

issued.

Step 2: After obtaining an RMA number, ship the product.

•Properly pack the product for shipping. All software, cable(s)

and any other accessories that came with the original package

must be included.

•Clearly write your RMA number on the top of the returned

package. SIIG will refuse to accept any shipping package, and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

•You are responsible for the cost of shipping. Ship the product

to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

•SIIG will ship the repaired or replaced product via Ground

in the U.S. and International Economy outside of the U.S. at

no cost to the customer.

Single-Serial PC Card is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of

SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other

names used in this publication are for identification only and may be trademarks of their respective

owners.

PRODUCT NAME

Single-SerialPCCard

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,

and legacy I/O adapters) that bridge the connection between Desktop/

Notebook systems and external peripherals. SIIG continues to grow by

adding A/V and Digital Signage connectivity solutions to our extensive

portfolio. Allcenteredaround the distribution and switching of A/V signals

overCAT5/6, theseproducts includematrix switches,distribution amplifiers,

extenders, converters, splitters, cabling, and more.

SIIG is the premier one-stop source of upgrades and is committed to

providing high quality products while keeping economical and competitive

prices. High-quality control standards are evident by one of the lowest

defective return rates in the industry. Our products offer comprehensive

user manuals, user-friendly features, and most products are backed by a

lifetime warranty.

SIIG products can be found in many computer retail stores, mail order

catalogs, and e-commerce sites in the Americas, as well as through major

distributors, system integrators, and VARs.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SIIG Computerhardware Handbücher

SIIG

SIIG SIIG 2-Port Serial 950-Value Bedienungsanleitung

SIIG

SIIG SC-SE6412 Bedienungsanleitung

SIIG

SIIG NN-000032-S1 Bedienungsanleitung

SIIG

SIIG JU-91RW12-S4 Bedienungsanleitung

SIIG

SIIG FireWire 800 ExpressCard Bedienungsanleitung

SIIG

SIIG JU-EP0012-S1 Bedienungsanleitung

SIIG

SIIG 1394 Dual-Port CardBus Bedienungsanleitung

SIIG

SIIG SC-SAE612-S1 Bedienungsanleitung

SIIG

SIIG eSATA II ExpressCard Bedienungsanleitung

SIIG

SIIG JJ-EC2011-S1 Bedienungsanleitung

SIIG

SIIG CyberSerial ExpressCard Bedienungsanleitung

SIIG

SIIG SoundWave 5.1 PCI Bedienungsanleitung

SIIG

SIIG SC-SAE312-S3 Bedienungsanleitung

SIIG

SIIG 1 FireWire 800 CardBus DV-Ki Bedienungsanleitung

SIIG

SIIG UltraATA 133 PCI Bedienungsanleitung

SIIG

SIIG AV-GM0AK3-S1 Bedienungsanleitung

SIIG

SIIG Parallel Pro Bedienungsanleitung

SIIG

SIIG SC-SAEE12-S1 Bedienungsanleitung

SIIG

SIIG NN-403P12 Bedienungsanleitung

SIIG

SIIG USB 2.0 Bay Reader/Writer+Floppy Bedienungsanleitung

SIIG

SIIG CyberParallel Dual Bedienungsanleitung

SIIG

SIIG DP PCI-to-PS/2 Bedienungsanleitung

SIIG

SIIG FireWire 800 2-Port ExpressCard/34 Bedienungsanleitung

SIIG

SIIG US2273 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung