SIIG NN-403P12 Bedienungsanleitung

1394 DV Kit

Quick Installation Guide

Introducing the 1394 DV Kit

The 1394 DV Kit is designed to add FireWire (1394) interface to your

computer for easy connection to DV camcorders, hard disk drives

(self-powered), scanners, printers, and other 1394 devices. For your

convenience, one FireWire (1394) 6-pin/4-pin DV cable is included

for connecting DV camcorders and other 1394 devices using 4-pin

connector. Deluxe video editing software is also included for

producing greeting cards, video e-mails, or home videos complete

with attractive titles, effects, and background music.

Key Features and Benefits

• IEEE 1394-1995, P1394a (rev. 1.1) and OHCI Interface

Specification 1.0 compliant

• Fully compliant with PCI Plug-n-Play specifications

• Adds FireWire (1394) interface to your PC for connecting up to

63 devices

• Supports hot-swapping and plug-n-play features

• Supports serial bus data transfer rates of 100, 200, 400 Mbps

• Works with various types of DV camcorders (Sony, Panasonic,

Canon, JVC, Sharp and more), hard disk drives (self-powered),

hubs, CD-RWs/DVD-ROMs, MO drives, digital cameras,

scanners and audio/video devices such as TV and set-top box

System Requirements

• Pentium 233 MHz computer with one available PCI slot

• 1 GB or larger hard disk drive

• 32 MB RAM and CD-ROM drive

• Windows 98SE/ME/2000/XP

Recommended system for Digital Video capturing/editing:

• Pentium II 400 MHz computer

• 64 MB RAM and CD-ROM drive

04-0211C

• 80 MB of available hard disk space

• Video card with 4 MB RAM (PCI or AGP)

• Windows 98SE or later

Package Contents

• One FireWire (1394) host adapter

• Deluxe Ulead VideoStudio DV editing software

• One FireWire (1394) 6-pin/4-pin DV cable

• This quick installation guide

Hardware Installation

General instructions for installing the card are provided below, since

the design of computer cases and motherboards vary. Refer to your

computer’s reference manual for further information, if needed.

• Turn OFF the power to your computer.

• Unplug the power cord and remove your computer's cover.

• Remove the slot bracket from an available PCI slot.

• Carefully align the card to the selected PCI slot push the board

down firmly, but gently, until it is well seated.

• Replace the slot bracket's holding screw to secure the card.

• Replace the computer cover and reconnect the power cord.

Figure 1. Inserting the PCI Board

Software Installation

Throughout driver installation, you may be prompted to insert your

Windows Installation CD. Some files on this CD are neccessary to

complete driver installation. Please insert the CD when prompted

and follow on-screen instructions.

Please make sure the board is installed before proceeding with

driver installation.

Windows 98SE Driver Installation

1. When Windows boots up, a New Hardware Found dialog box

should appear and the OHCI Compliant IEEE 1394 Host

Controller is identified.

2. At the Add New Hardware Wizard window, click Next.

3. Choose Search for the best driver for your device, and click

Next.

4. Clear all check boxes, click Next, Next, Next, then Finish to

complete driver installation.

Windows ME Driver Installation

1. At the Add New Hardware Wizard, choose Automatic search

for a better driver (Recommended), then click Next.

2. Click Finish and restart Windows to complete driver

installation.

Windows 2000/XP Driver Installation

Windows 2000 and XP will automatically detect and install the

correct driver for the FireWire (1394) host adapter.

To verify successful installation:

1. Check Device Manager to verify successful driver installation.

Windows 98SE/ME: From the main desktop, right click My

Computer, then click Properties. Click Device Manager tab.

Windows 2000/XP: Right click My Computer, then click

Manage. Click Device Manager.

2. Double click 1394 Bus Controller or IEEE 1394 Bus host

controllers option.

- An IEEE 1394 Host Controller should be displayed.

Ulead VideoStudio Software Installation

The 1394 DV Kit includes Ulead®VideoStudioTM digital video editing

software for producing home videos, complete with attractive titles,

transitions and sounds. Before installing VideoStudio, make sure

your adapter and DV camcorder are properly installed and

configured. See next section, Connecting DV Camcorder,for more

details on how to properly install your DV camcorder.

1. Insert the Ulead VideoStudio DV software CD. Auto-run

should start automatically. If not, click Start, Run, type in

X:\Autorun.exe, then click OK. (Replace X: with the drive

letter of your CD-ROM)

2. Choose Install Ulead VideoStudio and follow on-screen

instructions to complete installation.

Note: For instructions on how to use Ulead VideoStudio,

please refer to VStudio.pdf file located in the Manual

directory on the Ulead VideoStudio DV software CD.

Connecting DV Camcorder

Before setting up the digital video camcorder, make sure to verify

the driver for the adapter has been successfully installed in your

system and follow the setup procedures listed below.

1. Boot up your system.

2. Connect the 4-pin connector of the provided FireWire (1394)

6-pin/4-pin DV cable into your digital camcorder, and connect

the 6-pin connector into an available port on the 1394 adapter.

Power on the camcorder. The camcorder should now appear

in Device Manager.

To verify successful DV Camcorder setup:

1. Check Device Manager to verify successful driver installation.

Windows 98SE/ME: From the main desktop, right click My

Computer, then click Properties. Click Device Manager tab.

Windows 2000/XP: Right click My Computer, click Manage,

then click Device Manager.

2. Double click Imaging Device(s).

- AMicrosoft DV Camera and VCR or DV Camcorder should

be displayed.

Technical Support

QUESTIONS? SIIG’s Online Support has the answers! Simply visit

our web site at www.siig.com and click on SUPPORT. Our online

support database is updated daily with new drivers and solutions. The

answers to your problems could be just a few clicks away.

Return Merchandise Authorization (RMA)

SIIG warrants to the original buyer of the product that the hardware is

free of defects in materials and workmanship for a period of one, two or

five years from the date of purchase. If your product fails to be in good

working order during the warranty period, you may return it to SIIG for

repair or replacement at SIIG's option.

To return the product, you need to follow these steps:

Step 1: Contact SIIG's RMA Department

To obtain an RMA number, SIIG's RMA Department can be reached by

phone at (510)413-5333 or fax at (510)657-5962 or email at

[email protected]. In order to issue an RMA number, the product serial

number is required. This number can be found on the side of the box and

on the back of the product.

Step 2: Complete the RMA form

• Fill out your Return Merchandise Authorization (RMA) form, and

include it in the package with the product.

• Properly pack the product for shipping. All software, cable(s) and

other accessories that came with the original package must be

included.

• Clearly write your RMA number on the top of the returned package

and on the accompanying RMA form.

SIIG will refuse to accept any shipping package, and will not be

responsible for a product returned without an RMA number

posted on the outside of the shipping carton.

Step 3: Ship the Product

You are responsible for the cost of shipping back to SIIG at the following

address:

SIIG, Inc. RMA#_______________

6078 Stewart Ave.

Fremont, CA 94538

SIIG will ship the repaired or replaced product via UPS Ground or US

Mail at no cost to you.

PRODUCT NAME MODEL NUMBER

1394 DV Kit NN26xx

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a

ClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsare

designed to provide reasonable protection against harmful interference in a

residentialinstallation.Thisequipmentgenerates,uses,andcanradiateradio

frequency energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However,thereisnoguaranteethatinterferencewillnotoccurinaparticular

installation. If this equipment does cause harmful interference to radio and

television reception, which can be determined by turning the equipment off

andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore

of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio or TV technician for help

Caution:

Any changes or modifications not expressly approved by the party

responsibleforcompliancecouldvoidtheuser'sauthoritytooperate

this equipment

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA 94538-3152

1394 DV Kit is a trademark of SIIG, Inc.

SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered

trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.

Other names used in publication are for identification only and may be trademarks of their

respective companies.

Inhaltsverzeichnis

Andere SIIG Computerhardware Handbücher

SIIG

SIIG ExpressCard 11-in-1 Reader/Writer Bedienungsanleitung

SIIG

SIIG SC-SE6412 Bedienungsanleitung

SIIG

SIIG PCIe to ExpressCard Bay Bedienungsanleitung

SIIG

SIIG US2273 Bedienungsanleitung

SIIG

SIIG ExpressCard/54 CF R/W Bedienungsanleitung

SIIG

SIIG USB 2.0 9-in-1 Bay R/W Bedienungsanleitung

SIIG

SIIG USB 2.0 5-Port PCI Bedienungsanleitung

SIIG

SIIG Serial ATA PCI Bedienungsanleitung

SIIG

SIIG FireWire 800 2-Port ExpressCard/34 Bedienungsanleitung

SIIG

SIIG ExpressCard/54 CF R/W Bedienungsanleitung

SIIG

SIIG I/O Expander 2S Bedienungsanleitung

SIIG

SIIG SC-SB6412 Bedienungsanleitung

SIIG

SIIG CyberParallel Dual Bedienungsanleitung

SIIG

SIIG CyberParallel Dual Bedienungsanleitung

SIIG

SIIG eSATA II ExpressCard Bedienungsanleitung

SIIG

SIIG Network Device EVTEK-5103 Installationsanleitung

SIIG

SIIG SATA II-150 PCI Bedienungsanleitung

SIIG

SIIG UltraATA 133 PCI Bedienungsanleitung

SIIG

SIIG DP FireWire 800 3-Port PCIe Bedienungsanleitung

SIIG

SIIG UltraATA 100 Pro Bedienungsanleitung

SIIG

SIIG FireWire Home DV Kit Bedienungsanleitung

SIIG

SIIG SoundWave 5.1 PCI Bedienungsanleitung

SIIG

SIIG CyberParallel ExpressCard Bedienungsanleitung

SIIG

SIIG NN-E20022-S1 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung