SIIG 1394 Bedienungsanleitung

Introducing the 1394 Dual-Port Bay Hub

The1394Dual-PortBayHubis designedtosupport 1394

equipped PC computers. This 1394 hub expands 1394

connectivity to your computer.

FeaturesandBenefits

• Unique drive bay design adds ports to the front of

your computer for convenient device connection

• Fitsintoeither3.5"or5.25"(withincludedmounting

rack) drive bay

• IEEE 1394-1995, P1394a (rev. 1.1) and OHCI

Interface specification 1.0 compliant

• Supports serial bus data transfer rates of 100, 200,

and 400 Mbps

• Provides one 6-Pin and one 4-Pin 1394 ports for

easy device connections

• Hot-swapping feature allows you to connect/

disconnect devices without first turning your

system off

• Workswithvarioustypesof1394devicesincluding

DV camcorders/cameras, hard disk drives, CD-

RWs, DVD-ROMs, removable drives, scanners,

and other audio/video devices

SystemRequirements

• PC computer with one available 1394 port

• One available 3.5" or 5.25" drive bay

• Windows 98SE/ME/2000/XP/Server 2003

1394 Dual-Port Bay Hub

Quick Installation Guide

04-0253B

PackageContents

• (1) 1394 Dual-Port Bay Hub

• (1) 5.25 inch mounting rack

• (1) 6-pin to 6-pin 1394 cable

• (1) "Y" split power cable

• (1) 1394 cable holding bracket (w/rubber holding

ring)

• (1) Bag assorted mounting screws

• This quick installation guide

HubLayout

Important: The bay hub is shown in white in this

manual. However,itisavailableineitherblackorwhite

depending on the model purchased.

Figure 1. Hub layout

Power

Connector 1394 (6-pin)

Internal Port

1394 (4-pin)

1394 (6-pin)

5.25"MountingRackAssembly

Important: Use the Mounting Rack Assembly only

when installing the hub into a 5.25" drive bay.

Figure 2. 5.25" Mounting Rack Assembly

Installing the 1394 Dual-Port Bay Hub

Important: In order for the 1394 Dual-Port Bay Hub to

work properly, the driver of your existing 1394 host

adapter must be installed properly.

Assuming your 1394 host adapter is correctly set up

with the correct driver, the 1394 Dual-Port Bay Hub

should automatically be detected and installed when

connected.

1. Turn OFF the power to your computer and all

connected peripheral devices.

2. Unplug the power cord from the back of the

computer.

3. Remove the computer’s cover.

4. Select an available 3.5" or 5.25" drive bay for the

1394 Dual-Port Bay Hub, remove the cover plate

from the selected drive bay.

Note: When installing the 1394 Dual-Port Bay Hub

into a 5.25" drive bay install the hub into the 5.25"

mountingrack before mountinginto the drivebay

and follow the same assembly instructions. Refer

to 5.25" Mounting Rack Assembly on page 3.

5. Use the included "Y" split power cable and plug in

the mini power connector (same type of power

connector used for the floppy drive) to the 1394

Dual-Port Hub's power connector.

Figure 3. Connecting the Power Cable

6. Connect one end of the 1394 cable into the 1394

internal port on the 1394 Dual-Port Bay Hub.

Figure 4. Connecting the 1394 Cable

7. Carefully thread the cables through the drive bay

openingthenpushthehubassemblyintothedrive

bay. Align the hub's screw holes with the

appropriate holes in the drive bay, then carefully

attach the hub to the case using the included

mountingscrews. Becarefulnottoovertightenthe

mounting screws.

Figure 5. Mounting the Hub Assembly

8. Connect the 1394 cable into an available 1394 port.

Use the included 1394 cable holding bracket to

route the 1394 cable from the 1394 Dual-Port Bay

Hub to the outside 1394 port.

Note: If there is an internal 1394 port on your 1394

hostadapter,connectthecabletotheinternalport.

The 1394 cable holding bracket is not needed in

this case.

Mounting

Screw

Figure 6. External 1394 Connection

9. Connectthepowerconnectorofthe"Y"splitpower

cable to the system power supply.

Figure 7. Connecting the Power Cable

10. Replace the computer's cover and reconnect the

power cord, then turn the system on.

11. When Windows boots up, the 1394 Dual-Port Bay

Hub automatically gets detected and installed.

The hub is now ready for device connection.

Connecting 1394 Devices

Windows 98SE/ME/2000/XP/Server 2003 have many

built-in driver support for 1394 devices. Please refer to

devicemanufacturer fordetailsonhow to installdevice

driver for your 1394 product. Different devices may

require different types of 1394 cable.

System Power

Connector

Power

Connector

from "Y" Split

Power Cable

Technical Support

QUESTIONS? SIIG’s Online Support has the answers!

Simply visit our Web site at www.siig.com and click on

Support. Our online support database is updated daily

with new drivers and solutions. The answers to your

problems could be just a few clicks away.

If you can't find answers or solutions to your questions, you

have an option to submit the problems online to one of our

technical support analysts and we will promptly respond

to you with answers or solutions.

The 5-year manufacturer warranty supplied with this

product is offered by SIIG, Inc. If you should happen to

encounter any problems with this product, please follow

the procedures below.

1. If it is within the store's return policy period, please

return the product to the store where you purchased

from.

2. If your purchase has passed the store's return policy

period, please contact SIIG. See SIIG's Limited 5-year

Warranty card for more information.

Online Store

SIIGoffersallofourproductsonlineatourcompany

store. Visit us at http://onlinestore.siig.com to find

ourcompletelineofproducts,includinghardtofind

items and accessories (power adapters, cables,

upgrade kits, etc.).

1394Dual-PortBayHubisatrademarkofSIIG,Inc.

SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are

registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel

Corporation. Othernamesusedinpublicationareforidentificationonlyandmaybetrademarks

oftheirrespectivecompanies.

PRODUCT NAME

1394 Dual-Port Bay Hub

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undes-

ired operation.

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA 94538-3152

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading computer upgrade

manufacturer of I/O connectivity products, including PCI & ISA

serialandparallelports,USB,SerialATA&UltraATAcontrollers,

FireWire(1394a/b),Networking,SoundCards,andotheraccessories.

SIIGisthepremierone-stopsourceofupgrades.

SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly

features, and all products are backed by a 5-year manufacturer

warranty. High-qualitycontrolstandardsareevidentbytheoverall

easeofinstallationandcompatibilityofourproducts,aswellasone

ofthelowestdefectivereturnratesintheindustry. SIIGproductscan

befoundinmostcomputerretailstores,mailordercatalogs,ande-

commercesitesintheAmericasandtheUK,aswellasthroughmajor

distributors,systemintegrators,andVARs.

Inhaltsverzeichnis

Andere SIIG Schalten Handbücher

SIIG

SIIG CE-KV0011-S2 Bedienungsanleitung

SIIG

SIIG AV-GM09G3-S1 Bedienungsanleitung

SIIG

SIIG JU-SC0111-S1 Bedienungsanleitung

SIIG

SIIG AV-GM04P3-S1 Bedienungsanleitung

SIIG

SIIG AV-GM09S3-S1 Bedienungsanleitung

SIIG

SIIG USB 2.0 SlimHub 4000P Bedienungsanleitung

SIIG

SIIG USB Over IP Bedienungsanleitung

SIIG

SIIG USB 2.0+1394 6-Port Bay Hub Bedienungsanleitung

SIIG

SIIG ID-SC0511-S1 Bedienungsanleitung

SIIG

SIIG CE-KV0011-S1 Bedienungsanleitung

SIIG

SIIG DisplayPort 2-Port KVM Switch Bedienungsanleitung

SIIG

SIIG CE-KV0612-S1 Produktinformationsblatt

SIIG

SIIG 2x1 USB DisplayPort KVM Switch with Remote... Bedienungsanleitung

SIIG

SIIG PC Switch 6000 Bedienungsanleitung

SIIG

SIIG JU-SW2212-S1 Bedienungsanleitung

SIIG

SIIG ID-US0411-S1 Bedienungsanleitung

SIIG

SIIG USB 2.0 Switch Bedienungsanleitung

SIIG

SIIG USB 3.0 Bedienungsanleitung

SIIG

SIIG US22 Series Bedienungsanleitung

SIIG

SIIG CE-KV0G11-S1 Bedienungsanleitung

SIIG

SIIG USB 3.0 Bedienungsanleitung

SIIG

SIIG JU-SW2212-S1 Bedienungsanleitung

SIIG

SIIG JU-H70411-S2 Bedienungsanleitung

SIIG

SIIG 2x1 VGA Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch