Silicon Laboratories EM35 Series Bedienungsanleitung

EM35x Development Kit

User Guide

New in this Revision

Chapter 4: Silicon Labs part number changes in Table 4-1.

Chapter 7: usbaddr command added.

August 5, 2012

120-4030-000E

Silicon Laboratories Inc.

400 West Cesar Chavez

Austin, TX 78701

Tel: 1+(512) 416-8500

Fax: 1+(512) 416-9669

Toll Free: 1+(877) 444-3032

www.silabs.com

The information in this document is believed to be accurate in all respects at the time of

publication but is subject to change without notice. Silicon Laboratories assumes no responsibility

for errors and omissions, and disclaims responsibility for any consequences resulting from the use

of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the

functioning of undescribed features or parameters. Silicon Laboratories reserves the right to make

changes without further notice. Silicon Laboratories makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does Silicon

Laboratories assume any liability arising out of the application or use of any product or circuit, and

specifically disclaims any and all liability, including without limitation consequential or incidental

damages. Silicon Laboratories products are not designed, intended, or authorized for use in

applications intended to support or sustain life, or for any other application in which the failure of

the Silicon Laboratories product could create a situation where personal injury or death may occur.

Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized

application, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and

damages.

Silicon Laboratories, Silicon Labs, and Ember are trademarks of Silicon Laboratories Inc.

Other products or brandnames mentioned herein are trademarks or registered trademarks of their

respective holders.

EM35x Development Kit User Guide 120-4030-000E

Contents

1About This Guide..........................................................1-1

1.1 Purpose....................................................................... 1-1

1.2 Audience..................................................................... 1-1

1.3 Documentation Conventions..................................... 1-1

1.4 Getting Help................................................................ 1-1

2Introducing Ember Development Kits........................2-1

2.1 Overview ..................................................................... 2-1

2.2 Development Kit Contents......................................... 2-2

2.3 Hardware Requirements............................................ 2-2

2.4 Software Requirements ............................................. 2-2

2.5 Hardware..................................................................... 2-3

2.6 Software...................................................................... 2-3

2.7 Documentation........................................................... 2-3

2.8 Before You Begin....................................................... 2-4

3Development Kit Components....................................3-1

3.1 Overview ..................................................................... 3-1

3.2 Hardware..................................................................... 3-2

3.3 Acceptable Power Sources for Normal Operation .. 3-4

3.4 Software...................................................................... 3-7

4Setting Up Hardware Components.............................4-1

4.1 Overview ..................................................................... 4-1

4.2 ETRX3 Radio Communications Module (RCM)........ 4-1

4.3 Hardware Connections .............................................. 4-2

4.4 Connecting the Breakout Board and RCM............... 4-2

4.5 Breakout Board Power Configurations.................... 4-3

4.6 Breakout Board Serial Configurations ..................... 4-5

4.7 Common Hardware Configurations.......................... 4-5

4.8 Connecting the RF Cable to the RCM....................... 4-8

5Installing the Software.................................................5-1

5.1 Overview ..................................................................... 5-1

5.2 Installing the Ember Stack......................................... 5-1

5.3 Installing InSight Desktop ......................................... 5-1

EM35x Development Kit User Guide 120-4030-000E

5.4 Installing IAR Embedded Workbench for ARM........ 5-1

5.5 Installing the ISA3 Utilities ........................................ 5-2

5.6 Installing FTDI USB Drivers....................................... 5-2

6Using the InSight Adapter ...........................................6-1

6.1 Overview ..................................................................... 6-1

6.2 Connectivity and Power............................................. 6-1

6.3 Ethernet Settings........................................................ 6-1

6.4 Using the Admin Interface over USB........................ 6-2

6.5 Using the Admin Interface over Ethernet................. 6-2

6.6 Using the Serial Ports................................................ 6-2

6.7 Updating the Firmware .............................................. 6-2

7InSight Adapter Commands........................................7-1

7.1 Syntax Conventions................................................... 7-1

7.2 Entering Commands.................................................. 7-1

7.3 Command List ............................................................ 7-1

8Software Tools Overview.............................................8-1

8.1 Using the EM357 Nodetest Application.................... 8-1

8.2 Running a Packet Error Test..................................... 8-1

8.3 Testing Deep Sleep Current ...................................... 8-2

8.4 Example of Opening, Building, and Programming

a Sample Application ................................................ 8-4

8.5 Programming your Application on the EM357......... 8-4

8.6 Programming Manufacturing Tokens....................... 8-5

8.7 Using the Debugger in IAR Embedded Workbench

with an Ember InSight Adapter................................. 8-5

1-1

EM35x Development Kit User Guide 120-4030-000E

1 About This Guide

1.1 Purpose

This document describes the Ember EM35x Development Kit and explains how to set up its hardware and use the Ember

InSight Adapter (ISA3). For information on developing and debugging applications with InSight Desktop, see its on-

line HTML help.

For information on designing and debugging an application based on Silicon Labs' EmberZNet PRO software

stack, refer to documents 120-3029-000, Ember Application Development Fundamentals, and 120-035X-000, the

EM35x Datasheet. See section 2.7, Documentation, for a list of other EM35x documents of interest.

1.2 Audience

This document is intended for embedded software and hardware engineers who are responsible for developing

wireless applications with the Ember Development Kit. This document assumes that the reader has a solid

understanding of embedded systems design and programming in the C language. Experience with networking and

radio frequency systems is useful but not expected.

1.3 Documentation Conventions

Notation Meaning Example

Italics Identifies on-screen software menu

options. Connect

UPPERCASE Identifies a keyboard key. ENTER

Right-angle bracket Delimits a series of software program

menu options to be clicked. Open > Save

Courier Identifies software code and, in body text,

variables. void Main(String[] argv)

the buffer variable

Courier Italics Identifies a variable name. ipAddress

1.4 Getting Help

Development Kit customers are eligible for training and technical support. You can use the Silicon Labs web site

www.silabs.com/zigbee to obtain information about all Ember products and services. You can also contact

Customer Support at www.silabs.com/zigbee-support.

1-2

EM35x Development Kit User Guide 120-4030-000E

If you have any questions about your Development Kit, contact your account representative at one of the

following locations:

United States

25 Thomson Place

Boston, MA 02210

Telephone: 617

-951-0200

Fax: 617

-951-0999

Asia/Pacific

HK Spinners Industrial Bldg, Phase 5

5/F Flat D

760

-762 Cheung Sha Wan Rd

Kowloon

Hong Kong

Telephone: +852

-8120-5375

Europe

Unit

300 Science Park

Milton Road

Cambridge CB4 0XL

, UK

Telephone: 44 (0) 1223 423322

Fax: 44 (0) 1223 423390

2-1

EM35x Development Kit User Guide 120-4030-000E

2 Introducing Ember Development Kits

2.1 Overview

The EM35x Development Kit is used for application design and development. The Development Kit contains a

variety of hardware for quickly creating a prototype of the customer’s hardware, EmberZNet PRO, Silicon Labs'

implementation of the ZigBee Pro stack software specification, and various development tools which enable the

development of the customer’s application software.

EmberZNet PRO runs on top of an IEEE 802.15.4-compliant radio and link layer software. EmberZNet PRO is a

self-organizing, self-healing mesh networking protocol stack. Combined with the powerful IEEE 802.15.4

compliant Ember radios, the EmberZNet network stack provides complete networking services from the physical

layer up to a reliable application profile support layer. The stack produces networks that are reliable, flexible,

secure, and easy to use.

EmberZNet PRO1provides a common Application Programming Interface (API) that utilizes the underlying layers.

This API provides support for the following layers of the Open System Interconnection Reference Model (OSI

Model):

•PHY: radio control

•MAC: medium access

•LINK: route discovery

•NETWORK: routing, association

•APPLICATION: Application Profile Support for reliable message delivery

The EmberZNet PRO stack can be used to build ZigBee-based applications. Applications that are built on this

stack benefit from the following features:

•PHY and MAC layers comply with the IEEE 802.15.4-2003 standard

•LINK and NETWORK layers comply with the latest ZigBee specification

•The APS layer provides the interface to the application for data transfer and management, including

reliable transport and binding.

The Development Kit includes InSight Desktop which facilitates application development and debugging. InSight

Adapters (ISA3s) incorporate Power-over-Ethernet (PoE) capability, which can simplify node deployment in the

test environment. Breakout Boards provide a direct connection for debugging customer-designed hardware. For

detailed information about the Ember customer hardware debug interface, see document 120-2009-000, the

EM35x Breakout Board Technical Specification.

1The release version of EmberZNet PRO at the time of this writing is 4.0.

2-2

EM35x Development Kit User Guide 120-4030-000E

2.2 Development Kit Contents

Table 2-1 summarizes the components and the specified count for each component in the EM35x Development

Kit.

Table 2-1. EM35x Development Kit Components

Component EM35x Development Kit

InSight Adapter (ISA3) 3

EM357 Sample Chip 10

EM35x Breakout Board 3

EM35x Modules 9

Data Emulation Interface (DEI) Cable 3

Ember Happy Fun Ball 1

InSight Port (ISP) Cable 3

Radio Frequency Cable 1

Power-over-Ethernet Switch with Power Supply 1

USB Power Supply with Adapters 3

EM35x Quick Start Guide 1

InSight Desktop CD 1

IAR Embedded Workbench CD 1

US-to-multinational AC Plug Power Adapter Kit 1

AAA Battery Pack 3

Ethernet Cable 3

USB Cable 3

2.3 Hardware Requirements

•PC with Ethernet connectivity

•Network hub with DHCP server

2.4 Software Requirements

•Microsoft Windows XP

•Java, version 1.5V6 or later

•Adobe Acrobat Reader (available free from http://get.adobe.com/reader/)

2Three EM35x modules are installed on EM35x Breakout Boards; six EM35x modules are included in the EM35x

Module Box.

2-3

EM35x Development Kit User Guide 120-4030-000E

2.5 Hardware

•Breakout Boards serve as test beds for network hardware and applications. Each Breakout Board has

an associated EM35x Module, which can be deployed as a node within a network application. Each

Breakout Board connects with an InSight Adapter (ISA3) through two communication links: the InSight

Port (ISP) and the DEI Port. This allows the Breakout Board’s EM35x Module to interface with InSight

Desktop (ISD) through the ISA’s InSight Port and its wired Ethernet connection. These interconnections

are described later in this chapter. The Breakout Boards also have a prototype breadboard area for

application-specific hardware development.

•EM35x modules contain the Ember EM35x System-on-Chip (SoC) solution providing a complete radio

and microcontroller solution. All modules are pin-compatible, and they can be directly attached to a

Breakout Board.

•InSight Adapters (ISA3s) each connect a Breakout Board to the Ethernet. Each adapter transmits

network data collected via its InSight Port and conveys it over its Ethernet connection to InSight

Desktop. It also picks up any messages or new software that is addressed to this Breakout Board.

The InSight Port is a cabled communication link between the ISA3 and the EM35x Module mounted on the

Breakout Board.

•InSight Port Cables connect each ISA3 to a Breakout Board.

•AAA Battery Packs that attach to a Breakout Board enable deployment of battery-operated nodes.

•USB Power Supply with Adapters power Breakout Boards and / or ISA3s from wall sockets.

•Ethernet Cables connect ISA3s to an Ethernet subnet.

•Data Emulation Interface (DEI) cables provide a peripheral interface connection between the ISA3 and

Breakout Board. The DEI cable supports UART functionality.

2.6 Software

The Ember Development Kit contains two CDs for:

•InSight Desktop

•IAR Embedded Workbench

2.6.1 InSight Desktop

Installation components and associated documentation:

•EmberZNet PRO network stack library and APIs: debug and release builds (see Table 3-2)

•HAL library

•InSight Desktop

•Sample programs (see Table 3-3)

2.6.2 IAR Embedded Workbench

Licenses and support are provided separately and can be obtained from IAR Systems at http://www.iar.com.

2.7 Documentation

Document 120-4031-000, EM35x Quick Start Guide,is shipped with the EM35x Development Kit. All other

documents listed below are available from Silicon Labs’ Ember support page (www.silabs.com/zigbee-support)

as Adobe PDF files or as on-line HTML help:

•EM35x Development Kit User’s Guide (this document)

•Application Development Fundamentals (120-3029-000)

2-4

EM35x Development Kit User Guide 120-4030-000E

•Testing and Debugging Applications (120-3030-000)

•Advanced Application Programming with the Stack and HAL APIs (120-3031-000)

•EmberZNet API Reference: For the EM350 SoC Platform (120-3022-000)

•EM35x Breakout Board Technical Specification (120-2009-000)

•InSight Adapter (ISA3) Technical Specification (120-2010-000)

•EM35x Module Technical Specification (120-2011-000)

•EM35x Datasheet (120-035X-000)

•InSight Desktop User’s Guide (120-4005-000 and on-line HTML help)

•Application notes (various)

2.8 Before You Begin

The EM35x Development Kit is designed only for the operating conditions and interfaces specified in Ember

documents 120-2010-000, the InSight Adapter (ISA3) Technical Specification, and 120-2009-000, the EM35x

Breakout Board Technical Specification. Any modifications or alterations to the hardware are liable to cause

irreparable damage to the EM35x Development Kit, and shall render its warranty null and void.

If you wish to use the EM35x Development Kit in a non-standard fashion, consult with Ember Customer Support

or Ember Sales before starting custom development. This is especially true if you are embarking on an

aggressive development cycle, plan to use custom hardware, or wish to use alternate software configuration

files, images, or hardware configurations. Contact us and describe your plan, so we can help you minimize the

risk of delays in your development cycle.

Andere Handbücher für EM35 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Silicon Laboratories Mikrocontroller Handbücher

Silicon Laboratories

Silicon Laboratories Si4010 Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F530A Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F00 DK Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F99 Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F340 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories UG464 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F12 Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories AN515 Si4010 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories Si4311-DB Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories EFM8UB1-SLSTK2000A Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F12X Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories Wireless M-Bus-EK Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F500 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories BRD4258B Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F91 Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories TOOLSTICK C8051F850 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories UG346: BGM13S32 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories ZIGBEE ETRX357 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F34 Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories EFR32FG23 Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F02 Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories Z-Wave 700 Betriebsanleitung

Silicon Laboratories

Silicon Laboratories C8051F34-DK Series Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories UG172 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung