Simmons LRF 400 Bedienungsanleitung

Model: 801400 & 801400C

LIT. #: 95-0077/04-10

LRF

400

CONTENTS

English

Français

Español

Deutsch

Italiano

Português

02 - 07

08 - 13

14 - 19

20 - 25

26 - 31

32 - 37

Your SIMMONS Laser Rangefinder is a precision instrument designed to provide many years of enjoyment. This booklet will help you achieve

optimum performance by explaining its adjustments and features as well as how to care for this precise laser rangefinding instrument. To ensure

optimal performance and longevity, please read these instructions before using your SIMMONS Laser Rangefinder.

INTRODUCTION

Your Simmons LASER RANGEFINDER is the world’s most simple to use, yet advanced laser rangefinder. The Simmons Laser Rangefinder utilizes

Digital Technology and delivers superb and accurate range performance to +/- one yard. Range to a deer or a golf flag as far as 200 yards out, or

to a tree 400 yards away for a reference point. The single button operation allows outdoor enthusiasts to easily measure distance with confidence.

The SIMMONS LASER RANGEFINDER emits invisible, eyesafe, infrared energy pulses. Sophisticated digital technology instantaneously calculates

distances by measuring the time it takes for each pulse to travel from the rangefinder, to the target, and back.

The ranging accuracy of the SIMMONS LASER RANGEFINDER is plus or minus one yard under most circumstances. The maximum range of the

instrument depends on the reflectivity of the target. The maximum distance for most objects is 400 yards while for highly reflective objects the

maximum is 800 yards. Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular

target and the environmental conditions at the time the distance of an object is being measured.

The color, surface finish, size and shape of the target all affect reflectivity and range. The brighter the color, the longer the range. Red is highly

reflective, for example, and allows longer ranges than the color black, which is the least reflective color. A shiny finish provides more range than a

dull one. A small target is more difficult to range than a larger target. The angle to the target also has an effect. Shooting to a target at a 90 degree

angle (where the target surface is perpendicular to the flight path of the emitted energy pulses) provides good range while a steep angle on the

other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit. The

less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease the unit’s maximum range.

ENGLISH

OPERATIONAL SUMMARY

While looking through the monocular, depress the power button once to activate the inview display system (LCD). Aim the SIMMONS LASER

RANGEFINDER at a target at least 5 yards away, depress and hold the power button down until range reading is displayed. Release the power

button. Note: Once activated, the SIMMONS LASER RANGEFINDER’s LCD will remain active and display the last distance measurement for 30

seconds. You can depress the power button again at any time to distance to a new target. As with any laser device, it is not recommended to directly

view the emissions for long periods of time with magnified lenses.

FEATURES

Your SIMMONS LASER RANGEFINDER’s LCD incorporates illuminated indicators that advise you unit of measure, when the laser is active, the battery

charge is low, and when a target has been acquired. A summary of these features is presented below:

UNIT OF MEASURE OPTIONS – The SIMMONS LASER RANGEFINDER can be used to measure distances in yards. The unit of measure indicator is

located in the lower right portion of the LCD.

ILLUMINATING INDICATORS – Low Battery Charge ( ) When the low battery symbol is displayed in the upper right-hand portion of the LCD,

the battery charge is getting low and the 9-volt alkaline battery should be replaced.

Target Acquired: Informs the user that a distance measurement has been obtained. The message “TARGET ACQUIRED” will appear in the top portion

of the LCD. The distance measured will appear at the bottom of the LCD in numerical form.

SPECIFICATIONS

OPTICAL DESIGN – The SIMMONS LASER RANGEFINDER features a Perma Focus monocular optical system for viewing your target. A liquid crystal

display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting, yards, and low battery indicators. Inherent

in the manufacturing process are small black spots that appear in the optical system. These are a natural characteristic of the LCD and cannot be

fully eliminated in the manufacturing process. They do not affect the distancing performance of the unit.

SPECIFICATIONS (cont’d)

Dimensions: Pocket Size, measuring 4.2 x 3.6 x 1.9 inches

Weight: 7.7 oz.

Accuracy: +/- 1 yard

Magnification: 4x

Display: LCD (even and odd numbers)

Power Source: 9 volt alkaline battery

FOV: 320 ft. @ 1000 yards

Total Eye Relief: 20mm

Exit Pupil: 4 mm

Single Button Operation

Water resistant

Internal Yards

5-yard minimum, 800 yards to a reflective target, 200 yards to a golf flag, 200 yards to a deer, 400 yards to a tree

Includes case and strap

CLEANING

Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or fingerprints, clean with a soft cotton cloth, rubbing

in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. For a

more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the

fluid to the cleaning cloth – never directly on the lens.

ONE-YEAR LIMITED WARRANTY

Your Simmons product is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of

a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This

warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Simmons

Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the

address listed below:

IN U.S.A. Send To: IN CANADA Send To:

BOP BOP

Attn.: Service Department Attn.: Service Department

8500 Marshall Drive 25A East Pearce Street, Unit 1

Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you

may also contact: Bushnell Germany GmbH

European Service Centre

Mathias-Brüggen-Str. 80

D-50827 Köln

GERMANY

Tel: +49 221 995568-0

Fax: +49 221 995568-20

Before returning for repair, consult the Trouble Shooting Table below.

TROUBLE SHOOTING TABLE

If unit does not turn on – LCD does not illuminate:

• Depress power button.

• Check and if necessary, replace battery.

If unit powers down (display goes blank when attempting to power the laser):

• The battery is either weak or low quality. Replace the battery with a good quality alkaline battery. Heavy Duty

alkaline batteries are NOT recommended.

There is no reset button to clear last range reading before ranging another target:

• The last range reading does not need to be cleared before ranging another target. Simply aim at the new target

using the LCD’s reticle, depress the power button and hold until new range reading is displayed.

If target range cannot be obtained:

• Make sure LCD is illuminated.

• Make sure that the power button is being depressed

• Make sure that nothing, such as your hand or finger, is blocking the objective lenses (lenses closest to the target) that emit and receive the

laser pulses.

• Make sure unit is held steady while depressing power button.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15

of FCC Rules.

Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.

Votre télémètre laser SIMMONS est un instrument de précision conçu pour vous procurer du plaisir des années durant. Ce livret vous aidera à obtenir

une performance optimale en vous détaillant les réglages et les fonctions qui conviennent à votre appareil ainsi que la manière de prendre soin

de cet instrument télémétrique laser de précision. Pour assurer une performance et une longévité optimales, veuillez lire ces instructions avant

d’utiliser votre télémètre laser SIMMONS.

INTRODUCTION

Votre TELEMETRE LASER Simmons est le modèle de télémètre laser le plus simple au monde à utiliser tout en étant très performant. En faisant appel

à la technologie numérique, le télémètre laser Simmons offre des performances exceptionnelles d’une précision de +/- un mètre. Visez un chevreuil

ou un drapeau de golf situés jusqu’à 200 mètres de distance, ou un arbre à 400 mètres comme point de référence. Le bouton de fonctionnement

unique permet aux adeptes des activités en extérieur de mesurer facilement et précisément la distance.

LE TELEMETRE LASER SIMMONS émet des impulsions d’énergie infrarouge invisibles et inoffensives pour l’oeil. La technologie numérique

sophistiquée permet de calculer les distances instantanément en mesurant le temps nécessaire à chaque pulsion pour aller du télémètre à la cible

et revenir.

La précision de portée du TELEMETRE LASER SIMMONS est de plus ou moins un mètre dans la plupart des situations. La plage d’évaluation maximum

de l’appareil dépend de la réflexibilité de la cible. La distance maximum pour la plupart des objets est de 400 mètres alors que pour les objets très

réfléchissants elle peut atteindre 732 mètres. Remarque : Vous obtiendrez à la fois des distances maximales plus longues et plus courtes selon les

propriétés de réflectivité d’une cible particulière et les conditions environnementales au moment de la mesure de distance d’un objet.

La couleur, le fini de surface, la taille et la forme de la cible affectent la réflectivité et la portée. Plus la couleur est vive, plus longue sera la plage de

mesure. Le rouge, par exemple, est très réfléchissant et permet des plages de mesure plus longues que la couleur noire, qui est la couleur la moins

réfléchissante. Un fini brillant permet une plage de mesure plus longue qu’un fini mat. Une cible de petite taille est plus difficile à évaluer qu’une

plus grande cible. L’angle de la cible a également un effet. Viser une cible à un angle de 90 degrés (lorsque la surface de la cible est perpendiculaire

FRANÇAIS