Simulab PacerMan Bedienungsanleitung
www.simulab.com
USER GUIDE v1.0
System Set Up
Software Installation
Troubleshooting
PacerMan
TM
Table of Contents
Overview .........................................3
System Components .................................4
Quick Start Guide ...................................7
System Set Up ......................................8
IInstall Software .........................................8
Bluetooth ............................................10
Unpack and Inspect .....................................12
Install Tissue ..........................................12
Prepare Fluid System ....................................14
Connect to Power.......................................15
Connect Body Form to USB ................................16
Connect PacerMan to your Pacing Generator ...................16
System Set Up Checklist ..................................17
Software Guide.................................... 18
Launching Software .....................................18
Home Page...........................................19
Instructor Mode Scenario Setup .............................20
Calibration ...........................................21
Monitor Page ......................................... 22
Patient Vitals .......................................... 23
New Scenario ......................................... 24
Additional Functionality Bar ...............................25
Debrillator Interface Options .............................. 26
Pacing Procedural Options ................................ 27
System Maintenance and Storage ......................28
Battery Charging .......................................28
Relling the Pulse Bulb ...................................28
Draining the System .....................................29
Power Down the System ..................................30
Cleaning the System.....................................31
Packing and Storing.....................................31
Troubleshooting ...................................33
Warranty and Maintenance Agreement..................39
Replacement Parts Catalog ........................... 41
Overview |3PacerMan System
System Overview
PacerMan™ is the only high-delity
simulator for immersive transvenous
pacing—from needle insertion to capture
using all the clinical equipment. The system
offers a one of a kind opportunity to
practice the entire procedure—including
identifying intrinsic bradycardias, assessing
intracardiac waveforms and manipulating
output and rate with a pacing generator.
SKILL DEVELOPMENT
Learn to manipulate the pacing generator and interact with your
procedural kit.
» Gain and lose capture
» Rene output and rate in real-time
Improve procedural performance through instructor led competencies and
self directed repetition.
Practice decision making based on outcome options.
Train using blind and ECG guided techniques.
Increase team engagement with scenario based learning.
COMPONENTS AND ACCESSORIES
Body Form
Replaceable Tissue
Head Cover
Torso Cover
Fluid Reservoir Cap
Vessel Channel Cover
Simulated Extension System
Body Form to USB Cable
Wall Power Supply
Battery Charger
Battery Pack
PacerMan requires your own pacing generator and kit.
OEM Extension Cable
Universal Extension Cable
Drain Tube with Stop Clip
Venous Fluid Mixing Bottle
SimuSensor Venous Blood Concentrate
Simulated Arterial Blood
Fill Port with Funnel
Arterial Hand Pump
Fill Line
Carrying Case
System Components
BODY FORM
Simulab Corporation4 |System Components
Replaceable Tissue
Vessel Channel
Cover
Tissue Cradle
Serial Number Label
Battery Well
Torso Cover
Fluid Reservoir
and Cap
Head Cover
Arterial Line
System Components |5PacerMan System
Replaceable Tissue
System Components (continued)
Accessory Port:
Body Form to
USB Port:
Power Switch
Power Cord
Connection:
In Use Valve
Drain Connection
POWER & DRAIN INTERFACE PANEL
COMMUNICATION PANEL
Battery PackOr
Or
OEM Extension
Cable
Universal Extension
Cable
Body Form to
USB Cable
Wall Power Supply
Simulated
Extension System
Simulab Corporation6 |System Components
FLUID ACCESSORIES
System Components (continued)
Simulated Arterial Blood
SimuSensor Venous Blood
Concentrate
Venous Fluid Mixing Bottle
Fill Port with Funnel
Drain Tube with Stop Clip
Arterial Hand Pump
Fill line
1
1
4
4
4
3
3
6
7
7
6
2
2
5
5
PACERMAN SOFTWARE
Arterial
Line
Venous
Line
REPLACEABLE TISSUE
Quick Start Guide |7PacerMan System
Quick Start Guide
Load the PacerMan software onto your PC or laptop.
Insert the replaceable tissue and ll up the uid reservoir.
Connect body form to computer and power source.
Connect the body form to the pacing generator using the Simulated
Extension System.
Turn on power switch, and then turn the valve to the IN USE position.
Launch PacerMan software.
Choose Instructor or Student Mode.
If using Instructor Mode, set scenario parameters and then click begin.
You’ll hear the system self-calibrate and the status window will close,
opening the monitor page.
Turn on the vitals you want to present by toggling to the “ON” position
Your PacerMan System is ready to go.
1
5
2
6
3
7
8
9
10
4
NOTE: If any status items display “NO” check your connection
or see System Callibration on page: 21.
Simulab Corporation8 |System Set Up
System Set Up
The “Welcome” screen will automatically display when you insert the
PacerMan set up CD.
1
Make sure your computer has an Internet connection. The software requires USB
and Bluetooth drivers to be installed when you use the PacerMan System for the
rst time.
Window 7 or higher
512 MB RAM
Disk Space required if .net 4.5 is not already installed. If it is already
installed, then it requires less than 2MB of disk space
IMPORTANT NOTE: Install the PacerMan Software on your PC before
connecting the PacerMan System Body Form to your computer.
INSTALL SOFTWARE
REQUIREMENTS FOR SOFTWARE INSTALLATION
System Set Up |9PacerMan System
Install Software (continued)
Select the destination folder for installation. Choose the default location or
navigate to the desired location. Then click “Next”.
Click “Next” and proceed with the software installation.
Software installation will begin. Note: if you click “Cancel” on this screen it
will end the installation.
Once your software is successfully installed, the “Installation Complete” screen
will appear. Click “Close” and now the PacerMan set-up CD can be removed
from the disk drive. Please restart your computer before proceeding.
Simulab Corporation10 |System Set Up
Set up Bluetooth Connection
Ensure your PC is connected to the Internet the rst time you connect to
Bluetooth so the Bluetooth device driver can be properly installed. This will
happen automatically in the background when the system is rst paired.
To make PacerMan Bluetooth discoverable:
Connect to wall or battery power
Turn Power Switch ON
Disconnect USB to Body Form Cable
Each PacerMan has a serial number that is a
unique identier and will be displayed in the
discoverable device name. The Serial number
can be found on a label under the PacerMan
body form cover.
The PacerMan and PC will usually automatically connect anytime the two
devices are in range of each other when the Body Form is turned on, and the
USB cord is not connected to the body form.
Connection may take up to 30 seconds after PacerMan has been turned on and
discoverable.
NOTE: If using multiple PacerMan Systems in the same room, make sure
to properly pair each individual PC with the intended PacerMan body form
serial number.
2
Inhaltsverzeichnis
Andere Simulab Medizinische Geräte Handbücher
Beliebte Medizinische Geräte Handbücher anderer Marken
TekTone
TekTone Tek-CARE160 Bedienungsanleitung
NeuroMetrix
NeuroMetrix Quell 2.0 Bedienungsanleitung
AMT
AMT XLR8 Bedienungsanleitung
Medipost-Nutristoma
Medipost-Nutristoma MD300K2 Bedienungsanleitung
EDAN
EDAN SONOTRAX Pro Bedienungsanleitung
Restorative Therapies
Restorative Therapies RT300 Bedienungsanleitung
