SIS Nextometer Bedienungsanleitung

User Manual (ENG) –R03 2020.11.13

Nextometer –User Manual (ENG) - R03 2020.11.13

1. Device Description

Nextometer is a device to help maintain social distancing. If worn, it produces acoustic and visual alerts as well as vibration if

another device is detected within the set range.

The device does not detect the position of the wearer in any way. The only data stored by the same (identification number

and time track of the interactions) have a totally anonymous form.

Kit Contents

Technical Features

•1pc. Nextometer device

•1pc. Armband

•1pc. Lanyard

•1pc. A Type USB / Micro USB 0,5m

•Dimensions: 90mm x 44mm x 29mm

•Weight: 90g

•Technology: Ultra Wide Band

•Frequency: 6.5GHz (Channel 5)

•Battery capacity: 800mA

•Battery duration: 8h (medium estimated value)

2. Main Elements

1. Risk indicator (immediate and statistic)

2. Multifunctional button

3. Micro USB Port

4. Reset Button

5. Armband/Belt clip

6. Lanyard eyelet

3. Wearability

Arm

Neck

Belt

Nextometer can be worn on the arm

through the adjustable elastic band. The

device can be easily separated from the

armband for cleaning / sanitizing

operations

Nextometer can be worn around the

neck through the lanyard. The device can

be easily separated from the lanyard for

cleaning / sanitizing operations

Nextometer can be directly worn on the

belt through the integrated clip on the

back.

4. Switching Device ON

First Use

It is in general advisable to fully recharge the device. Connect the turned OFF device to a power source through the provided

Micro USB cable. Once this step has been carried out, the multifunction button (2) will start flashing red every 10 seconds, thus

indicating the state of charge in progress of the device. When the unit is at full charge the button (2) will provide be brightly lit and

all green. Once this condition is reached the system can be switched ON by keeping the multifunction button (2) pressed until a

sound is emitted. Device will provide a flashing green indication and will be ready to use.

User Manual (ENG) –R03 2020.11.13

Nextometer –User Manual (ENG) - R03 2020.11.13

Daily Use

Battery duration is sufficient to cover a typical work day. Low battery level will be indicated by a red flashing of the multifunction

button (2). Daily recharging is recommended to ensure 100% performance.

The battery charge status is visible only while the system is OFF and connected to a power source.

5. Switching device OFF

Hold the multifunction button (2) down for several seconds until you hear a high-pitched tone. Release the button after you hear

the high-pitched tone.

6. What does pushing the multifunction (2) button do?

•Push it once: statistical risk indicator visualization. Shows how many events have been recorded

•Push it 3 times in a row: reset the statistical risk indicator. Daily event logger goes to zero (stored events will not be erased)

•While plugged into a charger, occasional flashing red: charge is in progress

•While plugged into a charger, solid green lights: charge is complete

•While operating, blinking green light: all good, battery level OK

•While operating, blinking red light: low battery level

7. Risk indicator

The risk indicator alerts wearers if they’re too close to someone else. The first alert is a triple red flash combined with an audible

alert and vibration. Any prolonged stay will produce a triple alarm.

Nextometer is the only device of its kind which shows users how they’re doing throughout the day. Here’s how it works:

Events are logged in the device. An event is any two or more units coming within 1.5m/5 feet for more than 15 seconds. Events

between 2.5m/8 feet and 1.5m/5 feet are also considered with statistical risk reduced to 1/10.

You can check how you’re doing by pushing the multifunction button (2). The risk indicator will light up indicating events.

•All 5 green LEDs lit up: no events recorded

•Simultaneous 5 red LEDs: data recording is not active

•If one or more BLUE LEDs are present, see below chart:

•If red and blue lights appear, there’s a problem with your unit. Please contact us.

8. Device Forced Restart

To perform a forced reboot of the device press the reset button (4). Button can be reached using a simple paper clip.

Inhaltsverzeichnis

Andere SIS Messgerät Handbücher

SIS

SIS SIS8300-KU Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung